Name: AxleAssy Front Left
Brand: USA Standard Gear
SKU: 35214
Price: 432.99 USD

from

$432.99

AxleAssy Front Left

from

$2444.99

Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$474.99

Yukon 1541H replacement inner axle for Dana 60 ’00 and newer F250 & F350 Superduty with a length of 37.62 inches and with 35 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:

35 spline
37.62″ long
Fits Dana Spicer 60 in 2000 and up Ford F350
Right hand inner
5-332X U-joint size

from

$534.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 2008-2010 Ford 10.5″ housing with aftermarket 10.25″ ring and pinion set
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$186.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).

Product Features:

Fits Ford 10.25″
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$169.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Dana Spicer 60 front
Included are a pinion seal, axle seals, crush sleeve , complete shim kit, marking compound and brush.

from

$288.99

Product Features:

Nodular iron for added strength
Thick design
Durable powder coat finish
Magnetic drain plug
Made in USA
High strength stainless steel fasteners

from

$87.99

Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and fits 1995 and up Chevy/GMC 3500 with 13 inch ring gear, 1995 and up Dodge Ram 3500 Pickup rear, and 1995 and up Ford F350/F450/F550 two or four wheel drive rear differentials. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:

10 bolt design cover
Bolts and gasket included
Triple chrome plated for a lasting shine
10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included

from

$69.99

Chrome replacement cover for Dana 80.

Product Features:

Fits Dana Spicer 80
Chrome

from

$1195.00

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit fits full floating applications only.

Product Features:

Fits Ford 10.25″ and 10.5″
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$739.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits Dana Spicer 50
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$1119.99

Differential

from

$45.90

Timken understands how important seals are in the automotive industry. Leveraging our knowledge and experience with bearings, we offer a broad line of light-duty oil seals made exclusively for Timken in some of the world’s most advanced manufacturing plants.

Product Features:

Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
The flanged design allows for easier and proper installation and helps avoid cocking.
The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

from

$67.75

Differential Seal

from

$359.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits reverse rotation Dana Spicer 60
9.75″ ring gear diameter
29 spline pinion
12 ring gear bolts
4.30 ratio
Thick gear for 4.10 and down carrier

from

$429.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This gear set is designed for 1993 and newer trucks. When installing this gear set in a 99-’06 10.5″ housing you will need a PK F10.25 or YK F10.25 kit. If installing into a ’07-’10 10.5″ housing, use a PK F10.5-B or YK F10.5-B kit. If installing into a ’92 & down housing a new yoke will be needed.

Product Features:

Fits 1993 – 1999 Ford 10.25″
10.25″ ring gear diameter
31 spline pinion
Long pinion
12 ring gear bolts
4.11 ratio

from

$554.99

RngPnnKt

from

$9.49

Product Features:

Brand may vary by location

from

$19.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$309.99

DiffrlCarrBng

from

$17.99

Pinion seal for 10.25″ Ford.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Ford 10.25″

from

$19.79

Product Features:

Brand may vary by location

from

$24.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$16.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o

from

$18.29

Valvoline ULV is a full synthetic, ultra low viscosity transmission fluid specifically engineered for high speed automatic transmissions. Formulated to meet the performance requirements of the latest 9 & 10 speed transmission designs, including the Ford/GM 10R80 found in select Ford F-150 and Raptor trucks.

Product Features:

Formulated with premium synthetic base oils to achieve low viscosity and minimize deposits
Provides excellent thermal and oxidation performance
Durable friction modifiers help prevent shudder
Advanced anti-wear technology to better prevent gear wear