2020 Ford F-250 Super Duty Belts and Hoses

Essential Belts and Hoses for 2020 Ford F-250 Super Duties

Felpro – Multi-Purpose O-Ring (Part No.35759)

Multi-Purpose O-Ring

from

$1.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Bando – Drive Belt (Part No.W10002440920BAN)

Drive Belt

from

$103.16
Drive Belt

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000338855CON)

Multi Rib (Serpentine) Belt

from

$63.23
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000437245MTR)

Multi-Rib (Serpentine) Belt

from

$131.58
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

Motorcraft – Motorcraft Accessory Belt Idler Pulley (Part No.G6020360514MTR)

Motorcraft Accessory Belt Idler Pulley

from

$60.15
Motorcraft Belt Tensioners are manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Motorcraft – Acc. Belt Idler Pull (Part No.G60203262902MTR)

Acc. Belt Idler Pull

from

$44.80
Acc. Belt Idler Pull

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900333A)

Idler Pulley: Direct Fit, Steel, 90mm Diameter

from

$41.49
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the USA to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is specifically designed for Ford Diesel, Super Duty applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware (Part No.900625A)

Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware

from

$73.99
Litens Automotive is the original equipment (O.E.) supplier of this pulley assembly for Ford Super Duty Diesel applications. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured in Canada by Litens to the same exacting specifications as the O.E. part. This is a complete pulley ASSEMBLY including the pulley, mounting bolt, and back-side washer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley Assembly. Note: Assemblies save time and ensure “like new” performance
  • Precision steel stamping with close tolerance ball bearing pocket.
  • Electro-deposited coating (e-coat) for superior corrosion resistance.
  • Running surface designed and engineered for proper belt tracking.
  • 80mm O.D. (running surface); 39mm width, 8-Rib belt design, grooved running surface, steel construction.
See More

Dayco – Dayco, Acc. Belt Tensioner Assy, Automatic (Part No.G6001926450DAY)

Dayco, Acc. Belt Tensioner Assy, Automatic

from

$85.89
The Dayco Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001429436MTR)

Accessory Belt Tensioner Assembly

from

$167.11
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001663197MTR)

Accessory Belt Tensioner Assembly

from

$191.39
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999826A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$129.99
Litens Automotive is the original equipment manufacturer of this tensioner for Super Duty Ford Pickups. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Like the O.E. part, this part is manufactured in Canada by Litens to the same exacting specifications as the O.E. part. The tensioner maintains the heavy duty steel pulley and dual integrated location pins specified for this rugged diesel application. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Steel Pulley
  • Professional Mechanics will change this tensioner in about 1+ hours.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Gates – Premium Molded Coolant Hose (Part No.22433)

Premium Molded Coolant Hose

from

$29.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.5" Long, 1.75" Diameter (Part No.E72622)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.5" Long, 1.75" Diameter

from

$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.22779)

Premium Molded Coolant Hose

from

$19.29
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Motorcraft – Radiator Hose (Part No.G2000673390MTR)

Radiator Hose

from

$33.05
Radiator Hose

Motorcraft – Molded OE Radiator Hose (Part No.G2000455881MTR)

Molded OE Radiator Hose

from

$172.05
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:
  • Pre-shaped hose allows easy installation
  • Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
  • Recommended by Ford Motor Company
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.78" Diameter (Part No.E72223)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.78" Diameter

from

$19.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 2.06" Diameter (Part No.E72641)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 2.06" Diameter

from

$189.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26.5" Long, 2" Diameter (Part No.E72633)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26.5" Long, 2" Diameter

from

$103.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.88361)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 30 Inch Length (Part No.87889)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 30 Inch Length

from

$34.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dorman – Molded Heater Hose: Aluminum/Rubber (Part No.626-545)

Molded Heater Hose: Aluminum/Rubber

from

$81.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Gates – Premium Modular Coolant Hose (Part No.23818)

Premium Modular Coolant Hose

from

$91.99
Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation + the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count (Part No.5060393)

Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count

from

$40.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 96.25" Long, 8 Rib Count, Exact Fit (Part No.K080956HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 96.25" Long, 8 Rib Count, Exact Fit

from

$94.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (Part No.5060468)

Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count

from

$27.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 65.75 Long, 6 Rib Count (Part No.5060658)

Poly Rib Belt Serpentine Belt; 65.75 Long, 6 Rib Count

from

$37.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Upgrade your 2020 Ford F-250 Super Duty with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2020 Ford F-250 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your F-250 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Belts and Hoses for the 2020 Ford F-250 Super Duty, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2020 Ford F-250 Super Duty at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $301.99, with an average price of $71.81. Our 31 Belts and Hoses in stock come from 11 trusted brands, so you’re sure to find the right part for your 2020 Ford F-250 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ford F-250 Super Duty, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, FELPRO, Driveworks, and more. Dayco Belts and Hoses start at just $27.99 and boast an impressive 5 stars average rating from customers. FELPRO and Driveworks also bring quality to the table, with Belts and Hoses available starting at $1.79, and at an average 5 stars rating. With 235 customer reviews and counting, our 2020 Ford F-250 Super Duty Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Ford F-250 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Super Duty in top shape, all in one place. Start shopping confidently below for your 2020 Ford F-250 Super Duty!

Best-Selling Belt Tensioners for 2020 Ford F-250 Super Duties

Enhance the driving experience in your Ford with 5 quality Belt Tensioner components, starting at $109.99.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999947A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$175.99
Litens was the Original Equipment (O.E.) supplier of this popular Ford F-Series/Super-Duty tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner design include a heavy-duty steel pulley and a molded lift-feature on the arm to assist with belt removal and installation. As with the Litens Original Equipment tensioner, this replacement tensioner is produced in Canada. Designed for the 6.2L DOHC “Boss V-8” engine. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in under 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Motorcraft – Acc. Belt Tensioner (Part No.G60011149795MTR)

Acc. Belt Tensioner

from

$199.26
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Motorcraft – DRIVE BELT TENSIONER (Part No.BT-137)

DRIVE BELT TENSIONER

from

$301.99
DRIVE BELT TENSIONER

Worldpac – ACC. BELT TENSIONER (Part No.G60013122098MTR)

ACC. BELT TENSIONER

from

$178.36
ACC. BELT TENSIONER

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999632A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$109.99
Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact” part for the aftermarket. This popular tensioner designed for Ford Diesel vehicles, looks, fits, and performs like the original part being replaced. “O.E. Exact” – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Like the original design, this tensioner maintains the molded dual locating pins, a molded lift feature in the arm, and the heavy duty steel pulley. The Tensioner comes complete with a new fastening bolt. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy Duty Steel Pulley
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
  • Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
  • Installation instructions included
See More

Most Popular 2020 Ford F-250 Super Duty Pulleys

Customize your Ford with 5 Pulleys products like Idler Pulleys, all priced under $48.49.

Litens – Idler Pulley: Direct Fit, Steel, 76.5mm Diameter (Part No.900946A)

Idler Pulley: Direct Fit, Steel, 76.5mm Diameter

from

$25.99
Litens Automotive is the original equipment (O.E.) supplier of this idler pulley assembly for a wide range of Ford F-Series and Super-Duty applications with a 6.2L gas engine (Boss V-8). The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to the same exacting specifications as the O.E. part. Like the original part, this pulley is manufactured of heavy duty steel for maximum life and performance. There have been numerous Technical Service Bulletins (TSB) issued on pulleys produced by other manufacturers. Note: This drive uses two of these pulleys for belt routing. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
  • Precision steel stamping with close tolerance ball bearing pocket.
  • Electro-deposited coating (e-coat) for superior corrosion resistance.
  • Running surface designed and engineered for proper belt tracking.
  • 76.5mm O.D.; 17mm I.D.; 31.5mm width for a rib serpentine belt, Smooth running surface, steel construction.
See More

Litens – Idler Pulley: Direct Fit, Steel, 74.1mm Diameter, w/ Hardware (Part No.900703A)

Idler Pulley: Direct Fit, Steel, 74.1mm Diameter, w/ Hardware

from

$48.49
This Litens supplied pulley is manufactured by the original equipment (O.E.) manufacturer. This part is specifically designed for Ford Super Duty applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt, Dust Shield), saving you time!
  • Installation instructions included
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.36491)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$35.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dorman – Engine Idler Pulley (Part No.419-474)

Engine Idler Pulley

from

$25.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Litens – Idler Pulley: Direct Fit, Steel, 88.2mm Diameter, w/ Hardware (Part No.900718A)

Idler Pulley: Direct Fit, Steel, 88.2mm Diameter, w/ Hardware

from

$24.29
Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. This part is specifically designed for Ford applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt, Dustshields), saving you time!
  • Installation instructions included
See More

Top Picks for 2020 Ford F-250 Super Duty Serpentine and V Belts

Upgrade Ford F-250 Super Duties with top-quality Serpentine and V Belts parts, including 17 OEM and aftermarket selections for your 2020 model.

Dayco – Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (Part No.5060468)

Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count

from

$27.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (Part No.468K6)

Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count

from

$16.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 88.78 Long, 6 Rib Count (Part No.5060888)

Poly Rib Belt Serpentine Belt; 88.78 Long, 6 Rib Count

from

$30.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 81 Long, 6 Rib Count (Part No.810K6)

Poly Rib Belt Serpentine Belt; 81 Long, 6 Rib Count

from

$25.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 81 Long, 6 Rib Count (Part No.5060810)

Poly Rib Belt Serpentine Belt; 81 Long, 6 Rib Count

from

$35.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 134.65 Long, 8 Rib Count, Heavy Duty (Part No.5081346)

Poly Rib Belt HD Serpentine Belt; 134.65 Long, 8 Rib Count, Heavy Duty

from

$48.49
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count (Part No.5061055)

Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count

from

$43.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K061058)

Micro-V« Serpentine Drive Belt

from

$39.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K061058HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$55.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Double Sided Poly Rib Belt HD Serpentine Belt; 140.27 Long, 8 Rib Count (Part No.6081403)

Double Sided Poly Rib Belt HD Serpentine Belt; 140.27 Long, 8 Rib Count

from

$75.99
The Dayco HD double sided poly-V belt HD is the perfect solution for heavy-duty applications requiring the transmission of power from both sides of the belt. It features an EPDM rubber compound construction, plus aramid fiber cords to provide longer service life and reduced noise issues. Each belt is engineered with specially treated cords that help provide length and tension stability for long lasting durability and its solid rib design allows for additional belt strength and pulling power.

Product Features:
  • Withstands high under-hood temperatures and ozone contamination
  • Lessens pulley misalignment noise
  • Helps provide length and tension stability
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count (Part No.1055K6)

Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count

from

$30.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Serpentine Belt (Part No.W1000427070DAY)

Poly Rib Serpentine Belt

from

$61.17
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Bando – Drive Belt (Part No.W10002440822BAN)

Drive Belt

from

$59.40
Drive Belt

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000427070CON)

Multi Rib (Serpentine) Belt

from

$54.34
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Dayco, Drive Belt (Part No.W10001221484DAY)

Dayco, Drive Belt

from

$42.79
Dayco, Drive Belt

Gates – Micro-V« Serpentine Drive Belt (Part No.K060888)

Micro-V« Serpentine Drive Belt

from

$37.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Carquest Standard – Serpentine Belt: 46.8" Long, 6 Rib Count (Part No.468K6)

Serpentine Belt: 46.8" Long, 6 Rib Count

from

$15.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OE fit, form, and function
See More

In-Demand Engine Cooling Hoses for 2020 Ford F-250 Super Duties

Select from 1 premium Engine Cooling Hoses parts for your 2020 Ford F-250 Super Duty.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.5" Long, 1.50" Diameter (Part No.E72727)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.5" Long, 1.50" Diameter

from

$141.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Most Sold 2020 Ford F-250 Super Duty Heater Hoses

Explore our best-selling Ford parts for the 2020 F-250 Super Duty among 1 OEM and aftermarket options starting from $51.67.

Worldpac – HEATER HOSE (Part No.R30303576969MTR)

HEATER HOSE

from

$51.67
HEATER HOSE

Top-Rated Belts and Hoses Brands For Your 2020 Ford F-250 Super Duty

Shop for the best-rated brands offering Belts and Hoses and other products for your 2020 Ford F-250 Super Duties. Below you’ll find some of our best rated Belts and Hoses from Dayco, FELPRO, and Driveworks, and more. Belts and Hoses from these brands that fit a 2020 F-250 Super Duty start at just $1.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2020 Ford F-250 Super Duty Belts and Hoses

When it comes to maintaining or upgrading your 2020 Ford F-250 Super Duty, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2020 Ford F-250 Super Duty. With over 9 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99, with an average price of just $56.60. Plus, with over 35 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Poly Rib Serpentine Belt
from
$61.17
This product is not rated

Poly Rib Serpentine Belt

“”

Popular FELPRO 2020 Ford F-250 Super Duty Belts and Hoses

FELPRO auto parts is one of the highest quality Belts and Hose brands in the market. Any 2020 Ford F-250 Super Duty owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2020 F-250 Super Duty, Advance Auto Parts carries a full inventory of 1 FELPRO Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these FELPRO Belts and Hoses range up to $1.79, plus, with more than 1 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Multi-Purpose O-Ring
from
$1.79

(1)

Multi-Purpose O-Ring

“This is the big o-ring that connects the top, rear side of the thermostat housing with the metal portion of the upper radiator pipe. This is not the s”

FAQs for 2020 Ford F-250 Super Duty Belts and Hoses

Which Belts and Hoses are best-sellers for 2020 Ford F-250 Super Duties?

Out of 31 Belts and Hoses that fit 2020 Ford F-250 Super Duties, the following parts are the top sellers:

What’s the price range for 2020 Ford F-250 Super Duty Belts and Hoses?

Belts and Hose prices for the 2020 Ford F-250 Super Duty start at $1.79 and go up to $301.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2020 Ford F-250 Super Duty?

The average price for Belts and Hoses for the 2020 Ford F-250 Super Duty is $71.81. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford F-250 Super Duty model years?

Yes, we currently carry Belts and Hoses for 25 model years of Ford F-250 Super Duties between 1999 and 2024. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Belts and Hoses for my 2020 Ford F-250 Super Duty?

The cheapest 2020 Ford F-250 Super Duty Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2020 Ford F-250 Super Duty?

Out of 235 reviews by customers, our 2020 Ford F-250 Super Duty Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2020 Ford F-250 Super Duty and their top-rated products:

What types of Belts and Hoses do you sell for my 2020 Ford F-250 Super Duty?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2020 Ford F-250 Super Duty:

Can I get help with 2020 Ford F-250 Super Duty Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford F-250 Super Duty Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford F-250 Super Duty Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.