2020 Ford F-150 Drivetrains

Below you will find various in-demand Ford Drivetrains, components and accessories for your 2020 F-150. Advance Auto Parts has popular F-150 parts like Differentials, Spindles, 4WD Components and more. You’ll also find aftermarket and OEM Drivetrains for other F-150 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022, 2023 and more. Select a category of 2020 Ford F-150 Drivetrains below and start saving instantly.

Popular 2020 Ford F-150 Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

4WD Axle Actuator Housings

U-Joints

Drive Shaft and Axles

Rear Differential Cover Gaskets

Differential Covers

Drive and Prop Shaft Assemblies

Differential Bearings

Axle Shaft Bearings

Differential Bearing Kits

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Rear Axle Shaft Bearings

Differential Ring and Pinions

Spindle Lock Nuts

Differential Ring Gear Bolts

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

4WD Vacuum Check Valves

Essential Drivetrains for 2020 Ford F-150s

from

$37.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$285.99

Yukon standard open spider gear kit for 8.8″ Ford (and IFS) with 28 spline axles and 3/4″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Ford 8.8″ open differential with 28 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$404.99

USA Standard Pinion installation kit for ’97-’10 Ford 9.75″

Product Features:

Ring & Pinion Kit
1997-2010 Ford 9.75″
Rear
Engineered for the Harshest Conditions

from

$24.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$34.99

10.25″ Ford ” OEM” pinion seal.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Ford 10.25″

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$145.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$735.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$53.99

This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.

Product Features:

Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications
Effective fix – restores control of 4WD system impacted by failed original solenoid
Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
Trustworthy quality – backed by team of designers and engineers in the United States

from

$49.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$32.49

Product Features:

Brand may vary by location

from

$329.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits standard rotation Dana Spicer 44 front
Included are carrier bearings and races, pinion bearings and races, pinion seal, oil baffles and slingers , marking compound and brush.

from

$38.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$23.99

This 4WD vacuum check valve is engineered to match the fit and function of the original valve and help ensure proper vacuum levels for the 4WD system. Check the product details to select the correct check valve for your vehicle.

Product Features:

Direct replacement – this 4WD vacuum check valve is engineered to match the fit and function of the original valve
Ideal solution – manufactured to precise specifications to help restore and ensure proper vacuum levels to the 4WD system when the original valve has failed
Durable construction – made of quality materials for reliable performance and service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$7.99

7/16″ TO 3/8″ ring gear bolt spacer sleeve.

Product Features:

Ring gear bolt sleeve
Adapts 7/16″ to 3/8″

from

$4.79

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$57.99

Chrome cover for 9.75″ Ford.

Product Features:

Fits Ford 9.75″
Chrome

from

$269.99

Yukon standard open spider gear kit for 9.75″ Ford with 34 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Ford 9.75″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$299.99

Yukon standard open spider gear kit for 8.8″ Ford with 31 spline axles and 7/8″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Ford 8.8″ with 31 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
0.875″ cross pin shaft diameter

from

$13.99

10.25″ & 10.5″ cover gasket.

Product Features:

Cover gasket
Fits Ford 10.25″ and 10.5″

from

$12.99

8.8″ Ford cover gasket.

Product Features:

Cover gasket
Fits Ford 8.8″

from

$16.99

Product Features:

Pinion depth shims for Dana Spicer 70 and 70HD, Ford 10.25″ and 10.5″

from

$25.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$538.99

RngPnn

from

$241.99

Product Features:

FRD 10BLT 9.0 R/P 6.20 MGP

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$44.99

Differential Pinion

Upgrade your 2020 Ford F-150 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2020 Ford F-150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your F-150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Drivetrains for the 2020 Ford F-150, designed to meet your needs without breaking the bank. From Differential replacements to Spindles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2020 Ford F-150 at great prices. Our Drivetrains inventory for this model ranges from just $5.49 to $999.99, with an average price of $215.41. Our 62 Drivetrains in stock come from 13 trusted brands, so you’re sure to find the right part for your 2020 Ford F-150 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ford F-150, we stock popular OEM and aftermarket Drivetrains from top names like Royal Purple, Spicer, Moog, and more. Royal Purple Drivetrains start at just $19.49 and boast an impressive 4.8 stars average rating from customers. Spicer and Moog also bring quality to the table, with Drivetrains available starting at $37.99, and at an average 4.6 stars rating. With 6,191 customer reviews and counting, our 2020 Ford F-150 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Ford F-150 is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 in top shape, all in one place. Start shopping confidently below for your 2020 Ford F-150!

Best-Selling Differentials for 2020 Ford F-150s

Enhance the driving experience in your Ford with 42 quality Differential components, starting at $5.49.

show more show less

from

$41.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$19.49

Max ATF is a synthetic, high-performance, automatic transmission fluid. Its low co-efficient of friction and high film strength help to dramatically reduce heat and wear. Additionally, Max ATF is more oxidation stable than other transmission fluids for longer fluid life. Max ATF significantly reduces heat to extend the life of your transmission.

Product Features:

High performance automatic transmission fluid
High film strength helps to dramatically reduce heat and wear
Fully compatible and can be mixed with other automatic transmission fluids
Extends the life of your transmission

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$60.99

This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$27.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$5.49

Product Features:

F9.75″ RING GEAR BOLT SOLD INDIVIDUALLY

from

$10.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$49.99

from

$493.99

Fits 2011 and up Ford 9.75″
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$188.99

Product Features:

Spider gear kit
Fits Ford 9.75″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$137.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

FORD 8.8IFS BEARING KIT ’97-UP NO AXLE SEALS IN KIT

from

$143.99

Product Features:

FORD 8.8IFS MASTER KIT ’97-UP NO AXLE SEALS IN KIT

from

$17.99

from

$18.49

Valvoline ULV is a full synthetic, ultra low viscosity transmission fluid specifically engineered for high speed automatic transmissions. Formulated to meet the performance requirements of the latest 9 & 10 speed transmission designs, including the Ford/GM 10R80 found in select Ford F-150 and Raptor trucks.

Product Features:

Formulated with premium synthetic base oils to achieve low viscosity and minimize deposits
Provides excellent thermal and oxidation performance
Durable friction modifiers help prevent shudder
Advanced anti-wear technology to better prevent gear wear

from

$269.99

Spider gear kit
Fit Ford 9.75″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$569.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits 2011 and up Ford 9.75″
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush, and gasket.

from

$524.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets. .

Product Features:

Fits 2011 and up Ford 9.75″
9.75″ ring gear diameter
31 spline pinion
12 ring gear bolts
3.73 ratio

from

$564.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits reverse rotation Ford 8.8″
8.80″ ring gear diameter
28 spline pinion
10 ring gear bolts
3.55 ratio

from

$564.99

Fits reverse rotation Ford 8.8″
8.80″ ring gear diameter
28 spline pinion
10 ring gear bolts
4.11 ratio

from

$564.99

Fits reverse rotation Ford 8.8″
8.80″ ring gear diameter
28 spline pinion
10 ring gear bolts
3.31 ratio

from

$539.99

Fits 2011 and up Ford 9.75″
9.75″ ring gear diameter
31 spline pinion
12 ring gear bolts
4.56 ratio

from

$535.99

Ring and Pinion Kit

Top Picks for 2020 Ford F-150 4WD Components

Upgrade Ford F-150s with top-quality 4WD Components parts, including 2 OEM and aftermarket selections for your 2020 model.

show more show less

from

$33.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The 4WD Actuator ensures seamless transition between 2WD and 4WD modes, providing enhanced traction and stability on challenging terrains without manual intervention. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$23.99

Direct replacement – this 4WD vacuum check valve is engineered to match the fit and function of the original valve
Ideal solution – manufactured to precise specifications to help restore and ensure proper vacuum levels to the 4WD system when the original valve has failed
Durable construction – made of quality materials for reliable performance and service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

In-Demand Universal Joints for 2020 Ford F-150s

Select from 6 premium Universal Joints parts for your 2020 Ford F-150, with prices ranging from $15.99 to $55.99.

show more show less

from

$54.99

from

$37.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$37.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$55.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Most Sold 2020 Ford F-150 Drive Shafts and Axles

Explore our best-selling Ford parts for the 2020 F-150 among 11 OEM and aftermarket options starting from $31.99.

show more show less

from

$45.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$44.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$45.99

from

$31.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$32.49

Product Features:

Brand may vary by location

from

$178.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$171.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$999.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$850.99

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$765.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$49.99

Top-Rated Drivetrains Brands For Your 2020 Ford F-150

Shop for the best-rated brands offering Drivetrains and other products for your 2020 Ford F-150s. Below you’ll find some of our best rated Drivetrains from Royal Purple, Spicer, and Moog, and more. Drivetrains from these brands that fit a 2020 F-150 start at just $19.49 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Royal Purple 2020 Ford F-150 Drivetrains

When it comes to maintaining or upgrading your 2020 Ford F-150, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 2020 Ford F-150. With over 2 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.49, with an average price of just $30.74. Plus, with over 163 customer reviews and an average rating of 4.8 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $19.49

(30)

Max Automatic Transmission Fluid (1 Quart)

“I believe it improves car performance and maintains all running parts much better then the regular transmission fluids out there. Love this product an”

from $41.99

(133)

High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart

“The best”

Popular Spicer 2020 Ford F-150 Drivetrains

Spicer auto parts is one of the highest quality Drivetrain brands in the market. Any 2020 Ford F-150 owner should feel confident when installing genuine Spicer parts in their vehicle. To ensure the best fit and performance for your 2020 F-150, Advance Auto Parts carries a full inventory of 3 Spicer Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Spicer Drivetrains range from $44.99 to $54.99, plus, with more than 16 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $45.99

(10)

Universal Joint, Greaseable 1410 Series

“Went in perfect”

from $44.99

(5)

Universal Joint, Greaseable 1350 Series

“Excellent Dana u joint.”

from $54.99

(1)

Universal Joint

“Spicer U joints are great. These are actual OE parts on my truck.”

FAQs for 2020 Ford F-150 Drivetrains

Which Drivetrains are best-sellers for 2020 Ford F-150s?

Out of 62 Drivetrains that fit 2020 Ford F-150s, the following parts are the top sellers:

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
Greaseable Super Strength Universal Joint (10086947) – $37.99

What’s the price range for 2020 Ford F-150 Drivetrains?

Drivetrain prices for the 2020 Ford F-150 start at $5.49 and go up to $999.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2020 Ford F-150?

The average price for Drivetrains for the 2020 Ford F-150 is $215.41. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford F-150 model years?

Yes, we currently carry Drivetrains for 31 model years of Ford F-150s between 1977 and 2025. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Drivetrains for my 2020 Ford F-150?

The cheapest 2020 Ford F-150 Drivetrains we carry in stock are:

Ring Gear Bolt (20520467) – $5.49
Differential Pinion Seal (10751050) – $10.29
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Spindle Nut M10-1.5 Hex Size 13 mm (50185822) – $15.49
Universal Joint (10265721) – $15.99

What are the top-rated Drivetrains that fit the 2020 Ford F-150?

Out of 6,191 reviews by customers, our 2020 Ford F-150 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2020 Ford F-150 and their top-rated products:

Universal Joints
- Universal Joint (10855000) – $54.99
- Universal Joint (10265721) – $15.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $37.99

What types of Drivetrains do you sell for my 2020 Ford F-150?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2020 Ford F-150:

Can I get help with 2020 Ford F-150 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford F-150 Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford F-150 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2020 Ford F-150 Drivetrains

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford (And IFS) With 28 Spline Axles (Part No.16019)

USA Standard Gear – Pinion Installation Kit for 1997-2010 Ford 9.75" (Part No.60021)

FAG US – Bearing (Part No.HK4012)

Yukon Gear – 10.25" Ford " Oem" Pinion Seal (Part No.30253)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11140)

Dorman – Drive Shaft (Part No.936-537)

Dorman – Solenoid, 4WD Disengage and Emissions Purge (Part No.600-401)

Motive Gear – Differential Carrier Shim Kit (Part No.1135R)

Driveworks – Wheel Bearing (Part No.S-RP-1561-FO)

Yukon Gear – Bearing Install Kit For Dana 44 Differential (Straight Axle) (Part No.11020)

Spicer – Universal Joint (Part No.5-1310X)

Dorman – 4WD Actuator Vacuum Check Valve (Part No.926-390)

Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

National – Multi-Purpose Bearing (Part No.A-36)

Yukon Gear – Chrome Cover For 9.75" Ford (Part No.32010)

Yukon Gear – Standard Open Spider Gear Kit For 9.75" Ford With 34 Spline Axles (Part No.16038)

Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford With 31 Spline Axles (Part No.16021)

Yukon Gear – Ford 10.25" & 10.5" Cover Gasket (Part No.23008)

Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)

Yukon Gear – Replacement Pinion Depth Shims For Dana 70HD, Dana 70, Ford 10.25" & 10.5" (Part No.55013)

Pro-King – Differential Pinion Shim Kit (Part No.763B202)

Richmond Gear – RngPnn (Part No.79-0054-1)

Motive Gear – Performance Differential Ring and Pinion (Part No.F890620)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – Differential Pinion (Part No.33577)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Royal Purple – Max Automatic Transmission Fluid (1 Quart) (Part No.01320)

Felpro – Axle Housing Cover Gasket Irregular Shaped 12 Bolt Hole Gasket (Part No.RDS 55476)

Dorman – Differential Cover (Part No.697-705)

National – Multi-Purpose Bearing (Part No.A-36)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Motive Gear – Ring Gear Bolt (Part No.F75Z4216AA)

Motive Gear – Differential Pinion Seal (Part No.4278)

Motive Gear – Differential Carrier Shim Kit (Part No.1135R)

Yukon Gear – Bearing Install Kit For ’11 & Up Ford 9.75" Differential (Part No.11119)

USA Standard Gear – Standard Spider Gear Set For Ford 9.75" (Part No.39019)

Motive Gear – Differential Bearing Kit – Timken (Part No.R8.8RIFST)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.8RIFSMK)

Motive Gear – Differential Pinion Shim Kit (Part No.1136R)

Valvoline – ULV ATF Full Synthetic Ultra Low Viscosity Automatic Transmission Fluid, 1 Quart (Part No.888460)

Yukon Gear – Standard Open Spider Gear Kit For 9.75" Ford With 34 Spline Axles (Part No.16038)

Yukon Gear – Master Overhaul Kit For ’11 & Up Ford 9.75" Differential (Part No.14202)

USA Standard Gear – Ring & Pinion Gear Set For ’11 & Up Ford 9.75" In A 3.73 Ratio (Part No.36294)

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 3.55 Ratio (Part No.24357)

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 4.11 Ratio (Part No.24101)

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 8.8" Reverse Rotation In A 3.31 Ratio (Part No.24356)

USA Standard Gear – Ring & Pinion Gear Set For ’11 & Up Ford 9.75" In A 4.56 Ratio (Part No.36296)

Yukon Gear – Ring and Pinion Kit (Part No.24672)

Dorman – Spindle Nut M10-1.5 Hex Size 13 mm (Part No.615-820)

Carquest Premium – 4WD Actuator (Part No.FWA1014)

Dorman – 4WD Actuator Vacuum Check Valve (Part No.926-390)

Spicer – Universal Joint (Part No.5-1410X)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Driveworks – Universal Joint (Part No.DW-331)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Spicer – Universal Joint (Part No.5-1410-1X)

Spicer – Universal Joint, Greaseable 1410 Series (Part No.5-160X)

Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)

Spicer – Universal Joint (Part No.5-1350X)

Driveworks – Cylindrical Bearing (Part No.S-R1561TV)

Driveworks – Wheel Bearing (Part No.S-RP-1561-FO)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV717191)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV717251)

Dorman – Driveshaft Assembly (Part No.966-433)

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-804)

Dorman – Driveshaft Assembly (Part No.986-459)

Spicer – Universal Joint (Part No.5-1350-1X)