2019 Ford F-450 Super Duty Differentials

Essential 2019 Ford F-450 Super Duty Differentials

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)

Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon

from

$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 60 Reverse Rotation In A 4.11 Ratio (Part No.36080)

Replacement Ring & Pinion Gear Set For Dana 60 Reverse Rotation In A 4.11 Ratio

from

$365.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits reverse rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
See More

USA Standard Gear – Ring & Pinion "Thick" Gear Set For Dana 60 Reverse Rotation In A 4.30 Ratio (Part No.36304)

Ring & Pinion "Thick" Gear Set For Dana 60 Reverse Rotation In A 4.30 Ratio

from

$359.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits reverse rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.30 ratio
  • Thick gear for 4.10 and down carrier
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Dana 60 Reverse Rotation In A 4.56 Rat (Part No.24066)

High Performance Ring & Pinion Gear Set For Dana 60 Reverse Rotation In A 4.56 Rat

from

$469.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits reverse rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
  • Thick gear for 4.11 and down carrier
See More

USA Standard Gear – Ring & Pinion "Thick" Gear Set For Dana 60 Reverse Rotation In A 5.13 Ratio (Part No.36084)

Ring & Pinion "Thick" Gear Set For Dana 60 Reverse Rotation In A 5.13 Ratio

from

$369.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits reverse rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 5.13 ratio
  • Thick gear for 4.10 and down carrier
See More

Motive Gear – Differential Ring and Pinion (Part No.D80-410)

Differential Ring and Pinion

from

$531.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 80 In A 4.63 Ratio (Part No.36097)

Replacement Ring & Pinion Gear Set For Dana 80 In A 4.63 Ratio

from

$376.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Dana Spicer 80
  • 11.25″ ring gear diameter
  • 37 spline pinion
  • 12 ring gear bolts
  • 4.63 ratio
See More

USA Standard Gear – Ring & Pinion "Thick" Gear Set For Dana 60 Reverse Rotation In A 5.38 Ratio (Part No.36086)

Ring & Pinion "Thick" Gear Set For Dana 60 Reverse Rotation In A 5.38 Ratio

from

$369.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits reverse rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 5.38 ratio
  • Thick gear for 4.10 and down carrier
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down (Part No.20047)

Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down

from

$339.99
Yukon replacement standard open carrier case for Dana 60, 4.10 & down Semi-Float & Full float, (incl ABS) 2-1/8″ tall.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 60
  • 4.10 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)

Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down

from

$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 80
  • 3.73 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Differential Carrier (Part No.20040)

Differential Carrier

from

$409.99
Differential Carrier

Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up (Part No.20046)

Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up

from

$389.99
Yukon replacement standard open carrier case for Dana 60, 4.56 & up (incl ABS) 2-7/16″ tall.

Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Dana Spicer 60
  • 4.56 and up ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline (Part No.28005)

Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline

from

$1050.00
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)

Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down

from

$509.99
Product Features:
  • Trac Loc positraction carrier case
  • Does not include spider gears
  • Fits Dana Spicer 60
  • 4.10 and down ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up (Part No.20031)

Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up

from

$274.99
Yukon replacement standard open carrier case for Dana 60, 4.56 & up (Not ABS) 2-7/16″ tall.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 60
  • 4.56 and up ratio only
  • Does not include spider gears
  • Not compatible with ABS applications
See More

Yukon Gear – Steel Cover For Dana 80 (Part No.32323)

Steel Cover For Dana 80

from

$215.99
Product Features:
  • Fits Dana Spicer 80
  • Steel
See More

aFe POWER – Differential Cover (Part No.46-70382)

Differential Cover

from

$355.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. An oil level sight glass and calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover is finished with black powder-coating and machined fins for a distinctive look. 5 Quart Gear Oil Capacity: This cover has about a 5 quart gear oil capacity at the factory fill level, factory cover holds about 4 quarts. Built-in Cooling Fins: Built-in internal and external cooling fins increase surface area to maximize cooling of the differential oil. Magnetic Drain/Fill Plug: Oil Level Sight Glass: Large oil level sight glass with 1/8” NPT calibration plug set to the factory fluid level to eliminate overfilling.

Product Features:
  • Constructed of Durable A356-T6 Cast Aluminum
  • Reinforcing Ribs and Black Powder coating w/ Machined Fins
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Large Oil Level Sight Glass w/ Calibration Plug
See More

aFe POWER – Differential Cover (Part No.46-70032)

Differential Cover

from

$355.99
aFe Powers new rear differential cover brings performance engineering to the protection of your axles differential. This differential cover is constructed out of durable die cast A380 aluminum with reinforced ribs and wrinkle black powder coating for maximum strength and styling. This cover comes with all necessary hardware and includes an O-ring for a leak free seal. This cover has about a 5 quart lube capacity at the factory line; factory cover holds about 4 quarts. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a large magnetic drain and fill plug that captures loose particles for maximum rear-end protection. Pre-installed large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling.

Product Features:
  • Magnetic Drain Plug
  • Sight Glass
  • Internal And External fins
  • Magnetic Fill Plug
See More

aFe POWER – Differential Cover (Part No.46-70030)

Differential Cover

from

$289.99
aFe Powers new rear differential cover brings performance engineering to the protection of your axles differential. This differential cover is constructed out of durable die cast A380 aluminum with reinforced ribs and wrinkle black powder coating for maximum strength and styling. This cover comes with all necessary hardware and includes an O-ring for a leak free seal. This cover has about a 5 quart lube capacity at the factory line; factory cover holds about 4 quarts. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a large magnetic drain and fill plug that captures loose particles for maximum rear-end protection. Pre-installed large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling.

Product Features:
  • 5 Quart Lube Capacity
  • Built In Internal/External Fins
  • Magnetic Drain Plug
  • Optional Accessories Available
See More

Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)

Chrome Replacement Cover For Dana 80

from

$69.99
Chrome replacement cover for Dana 80.

Product Features:
  • Fits Dana Spicer 80
  • Chrome
See More

Spectre – Differential Cover (Part No.6091)

Differential Cover

from

$87.99
Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and fits 1995 and up Chevy/GMC 3500 with 13 inch ring gear, 1995 and up Dodge Ram 3500 Pickup rear, and 1995 and up Ford F350/F450/F550 two or four wheel drive rear differentials. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • 10 bolt design cover
  • Bolts and gasket included
  • Triple chrome plated for a lasting shine
  • 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
See More

Dorman – Differential Cover Assembly (Part No.697-741)

Differential Cover Assembly

from

$49.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)

Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70

from

$288.99
Product Features:
  • Nodular iron for added strength
  • Thick design
  • Durable powder coat finish
  • Magnetic drain plug
  • Made in USA
  • High strength stainless steel fasteners
See More

2019 Ford F-450 Super Duty Differentials

Maybe you’re in the middle of a full rebuild of that 2019 Ford F-450 Super Duty. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 10 different Differentials in our inventory ranging from $12.79 to $939.99. That means you can find the exact parts or products you need to keep that 2019 Ford F-450 Super Duty running smoothly.

Differentials are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2019 Ford F-450 Super Duty. Valvoline, Dorman, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2019 Ford F-450 Super Duty, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 2019 Ford F-450 Super Duty rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2019 Ford F-450 Super Duty Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2019 Ford F-450 Super Duty demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-450 Super Duty the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2019 Ford F-450 Super Duty Differentials

What are the most purchased Differentials for the 2019 Ford F-450 Super Duty?

Out of 10 Differentials for the 2019 Ford F-450 Super Duty, the most popular in our inventory are:
Differential Cover Assembly
from $49.99
This product is not rated
Differential Cover Assembly
Differential Covers
Differential Cover
from $355.99
This product is not rated
Differential Cover
Differential Covers
RngPnnKt
from $799.99
This product is not rated
RngPnnKt
Differential Ring and Pinions