2018 GMC Sierra 1500 Drivetrains
More 2018 GMC Sierra 1500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2018 GMC Sierra 1500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2018 GMC Sierra 1500 Drivetrains
National – Bearings (Part No.SCH-208)
from
$21.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Transfer Case Shift Motor (Part No.600-901)
from
$267.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
- Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
- 100% new – this transfer case motor is entirely new, not remanufactured like competitors
- Quality assured – vehicle-specific application has been validation tested to ensure quality
Driveworks – Axle Shaft Seal (Part No.S-710648)
Pro-King – Differential Cover Gasket (Part No.742G303A)
from
$31.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Richmond Gear – RngPnn (Part No.49-0041-1)
from
$342.99
RngPnn
Driveworks – Camshaft Seal (Part No.S-99139)
National – Oil Seal (Part No.710675)
from
$27.49
Oil Seal
Felpro – Differential Cover Gasket (Part No.RDS 55477)
from
$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
USA Standard Gear – Master Overhaul Kit for GM 9.76" Differential (Part No.37119)
from
$518.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Master Overhaul Kit
- 2014 & Up GM 9.76″ 12 Bolt
- Rear
- The Most Comprehensive and Complete Master Rebuild Kit on the Market
Yukon Gear – Standard Open Spider Gear Kit For 8.25" GM IFS (Awd & 4WD Models) (Part No.16124)
from
$461.99
Yukon standard open spider gear kit for 8.25″ GM IFS. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 8.25″ IFS front
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Bearings (Part No.A-42)
from
$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
EVO Driveline – Transfer Case Assembly, Without Motor (Part No.UMT142)
from
$1616.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
Dorman – Crush Sleeve (Part No.J7063751995DOR)
from
$7.53
Crush Sleeve
Driveworks – Clutch Release Bearing (Part No.S-B-2010)
Richmond Gear – Differential Cross Shaft (Part No.80-0272-1)
from
$66.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Dorman – Suspension Differential Mount Bushing (Part No.523-071)
from
$67.99
This differential mount bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Differential Support Bracket (Part No.RK643171)
from
$92.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
National – Multi Purpose Seal (Part No.710831)
from
$24.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Recognized worldwide for their quality and reliable performance for every type of repair
- Temperature range: -40°F to 400°F; -40°C to 204°C
Driveworks – Universal Joint (Part No.DW-331)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.49
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Belltech – Spindle Assembly, 2 Inch Drop, Steel, Set Of 2 (Part No.2509)
from
$438.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber
Product Features:
See More
Product Features:
- By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
- Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
- Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification
Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)
from
$10.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Gear Install Kit (Part No.GM9.5IKL)
Richmond Gear – Differential Gear Install Kit (Part No.83-1026-B)
from
$39.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
National – Bearings (Part No.FC-66561)
from
$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – 4WD Actuator (Part No.FWC1095)
from
$99.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – 4WD Actuator, Front Axle (Part No.600-101)
from
$104.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
Pro-King – Differential Shift Actuator (Part No.742D421A)
from
$92.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Popular 2018 GMC Sierra 1500 Drivetrains Categories
2018 GMC Sierra 1500 Drivetrains
You count on your 2018 GMC Sierra 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 196 Drivetrains ranging in price from $2.49 to $3,014.99, you’re sure to find everything you need for your 2018 GMC Sierra 1500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 24 different brands like Moog, Valvoline, and Driveworks. 2018 GMC Sierra 1500 Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 13,454 extensive product reviews on 2018 GMC Sierra 1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.6 stars and Greaseable Super Strength Universal Joint with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2018 GMC Sierra 1500 below to get started!
Top-Rated Drivetrains Brands For Your 2018 GMC Sierra 1500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 GMC Sierra 1500 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 2018 GMC Sierra 1500 back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2018 GMC Sierra 1500, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2018 GMC Sierra 1500 Drivetrains
What are the most purchased Drivetrains for the 2018 GMC Sierra 1500?
Out of 196 Drivetrains for the 2018 GMC Sierra 1500, the most popular in our inventory are:
What are the top-rated 2018 GMC Sierra 1500 Drivetrains?
Top-rated Drivetrains for your 2018 GMC Sierra 1500 based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
from
$36.99
(41)
Greaseable Super Strength Universal Joint
“Easy install and great way to have sting durability with access to grease points”
