2016 GMC Sierra 1500 Drivetrains

Name: Remanufactured Transfer Case Motor
Brand: Cardone
SKU: 48-105
Price: 207.99 USD
Rating: 5.0 (6 reviews)

Below you will find various in-demand GMC Drivetrains, components and accessories for your 2016 Sierra 1500. Advance Auto Parts has popular Sierra 1500 parts like Differentials, Universal Joints, Drive Shafts and Axles and more. You’ll also find aftermarket and OEM Drivetrains for other Sierra 1500 model years including 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2016 GMC Sierra 1500 Drivetrains below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2016 GMC Sierra 1500 Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

4WD Actuator Switches

U-Joints

Drive Shaft and Axles

Transmission Transfer Case Motors

Transfer Case Adapter Gaskets

Transfer Case Output Shaft Sensors

Transfer Case Gaskets

Rear Differential Cover Gaskets

Differential Covers

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Axle Shaft Bearing Assemblies

Differential Mounts

Differential Mount Bushings

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Front Housing Cover Gaskets

Differential Cover Bolts

Input Shaft Pilot Bearings

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Rear Axle Shaft Bearings

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Spindle Lock Nuts

Drive Shaft Repair Kits

Differential Lock Assemblies

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Differential Carrier Bushings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Transfer Case Output Shaft Bearings

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Differential Seals

Axle Shaft Lock C-Clips

Complete Differentials

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Pinion Shafts

Differential Carrier Bearing Shims

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Ring and Pinion Kits

Drive Axle Assemblies

Limited Slip Differential Assemblies

Transfer Case Oil Pump Housings

Differential Clutch Pack Clips

Drive Axle Shaft Housings

Transfer Case Range Position Sensors

Axle Differential Bearing and Race Set

Drive Axle Shaft Housing Gasket

Essential Drivetrains for 2016 GMC Sierra 1500s

from

$207.99

CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100 percent computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:

All motors are 100 percent torque tested to ensure strength for proper gear engagement.
Each unit is 100 percent computer tested at 3 points during the remanufacturing process for guaranteed performance.
Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
Motor magnets are 100 percent recharged for superior performance and reliability.
Transfer case motor sensors are 100 percent replaced with new, O.E.-quality sensors for superior performance and long product life.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$21.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$43.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Returns like-new steering
Long-lasting performance
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$10.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$49.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.79

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$121.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits GM 12 bolt passenger car and truck and 8.6″
Includes carrier bearings and races and “super” carrier shim kit

from

$189.99

TCaseBrg-SealKit

from

$23.99

Product Features:

Cross pin bolt
Fits GM 9.5″ and 9.25″ IFS

from

$255.99

Polished aluminum cover for 8.6″, 8.2″ and 8.5″ GM rear.

Product Features:

Fits GM 8.5″ and 8.6″
Finned polished aluminum

from

$591.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$1596.99

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts: gears, pinions, assembly bolts, bearings, seals, etc. Each unit is micrometer checked for proper gear mesh. Units are assembled, sealed and include backing plates, axle shafts and fluid. Axles are packaged in heavy plastic to protect the unit & aid in returning the core.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$187.99

Product Features:

FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949

from

$217.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
Smart solution – delivers reliable fit and function for competitive price
Trustworthy quality – backed by team of designers and engineers in the United States

from

$6.99

This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

Product Features:

Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
Interlocking design makes installation much easier

from

$607.99

This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$19.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Fiber construction
Fits a wide variety of applications
Dana engineering-approved for fit, form and function

from

$404.99

Product Features:

Clutch kit
Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
14 piece kit
Carbon fiber clutches

from

$26.99

8.25″ GM IFS pinion seal (88 and up).Yukon Mighty seal.

Product Features:

Pinion seal
Fits GM 8.25″ IFS

from

$649.99

Ring and Pinion Kit

from

$73.99

8.25″ IFS (99 & newer) stub axle side seal (2 needed).Yukon Mighty seal.

Product Features:

Front stub axle seal
Fits 1999 and up GM 8.25″ IFS

from

$142.99

Anchor 6063 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1999-2007
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 In. / 35 mm
CENTERLINE: 2.20 In. / 56 mm
Mount Width: 6.62 In. / 168 mm
Style: Bat Wing
With Studs

from

$18.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$499.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Econ shims.

Product Features:

Fits 2014 and up GM 9.5″ w/ 12 bolt rear cover
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.

from

$472.99

This differential housing is a direct replacement for an original unit that has failed due to impact, normal wear, insufficient lubrication, or damaged internal components. It is made of durable materials for reliable service.

Product Features:

Ideal solution – this differential housing is a direct replacement for an original unit that has failed due to impact, normal wear, insufficient lubrication or damaged internal components
Exact fit – matches the fit, function and performance of the original differential housing on specified vehicles
Durable construction – the housing and its internal components are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 2016 GMC Sierra 1500 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2016 GMC Sierra 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your Sierra 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 338 Drivetrains for the 2016 GMC Sierra 1500, designed to meet your needs without breaking the bank. From Differential replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2016 GMC Sierra 1500 at great prices. Our Drivetrains inventory for this model ranges from just $2.99 to $3,014.99, with an average price of $331.49. Our 338 Drivetrains in stock come from 20 trusted brands, so you’re sure to find the right part for your 2016 GMC Sierra 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 GMC Sierra 1500, we stock popular OEM and aftermarket Drivetrains from top names like Spicer, National, Driveworks, and more. Spicer Drivetrains start at just $45.99 and boast an impressive 4.6 stars average rating from customers. National and Driveworks also bring quality to the table, with Drivetrains available starting at $10.99, and at an average 4.3 stars rating. With 12,262 customer reviews and counting, our 2016 GMC Sierra 1500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 GMC Sierra 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 1500 in top shape, all in one place. Start shopping confidently below for your 2016 GMC Sierra 1500!

Best-Selling Differentials for 2016 GMC Sierra 1500s

Enhance the driving experience in your GMC with 237 quality Differential components, starting at $2.99.

show more show less

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$11.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$43.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$503.99

from

$234.99

Product Features:

GM 10BL 8.5 R/P 3.42A MG FRT/REAR

from

$27.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$243.99

Product Features:

GM 10BL 8.5 R/P 3.73 MG FRT/REAR

from

$131.99

Product Features:

GM9.5″ INTERNAL KIT (OPEN) 33 SPL. FRONT & REAR

from

$8.99

High-quality Differential Carrier Shim Kit

Product Features:

CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON

from

$9.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$2.99

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$7.99

Differential Cover B

from

$6.99

Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:

Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
7/16″ x 20

from

$89.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$24.99

Product Features:

Fits GM 8.6″ and 9.5″
Sleeve to adapt standard yoke to use late model triple lip pinion seal

from

$4.99

8.6″ GM standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 8.6″

from

$114.99

This differential mount is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$54.99

Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Chrysler 8.25″ open differntial with 27 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$74.99

This differential mount bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Popular 2016 GMC Sierra 1500 Universal Joints

Customize your GMC with 26 Universal Joints products like U-Joints, U-Joint Strap Kits, and U-Joint Centering Yokes, all priced under $234.99.

show more show less

from

$42.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$56.99

Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$29.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$46.99

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$48.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$37.99

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$34.49

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$31.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$36.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$46.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$13.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$32.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$234.99

Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.5″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
Strap style

from

$42.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$59.99

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$55.99

from

$46.99

Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.

Top Picks for 2016 GMC Sierra 1500 Drive Shafts and Axles

Upgrade GMC Sierra 1500s with top-quality Drive Shafts and Axles parts, including 47 OEM and aftermarket selections for your 2016 model.

show more show less

from

$45.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$21.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.49

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$54.99

from

$6.99

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$169.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$37.99

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$19.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$18.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$89.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:

Includes axle bearing and seal
Services one side
2.800″ O.D.
1.620″ I.D.

from

$21.49

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$169.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$66.99

Anchor 6092 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 2007-2019
Weight approx: 3 Lbs
BEARING ID / BORE: 1.5750 In. / 40 mm
CENTERLINE: 2.00 In. / 51 mm
Mount Width: 6.62 In. / 168 mm
Octagon
Without Plate
With Studs

from

$11.99

Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.

Product Features:

Rear axle seal
Fits 1988 and up GM half ton truck
2.800″ O.D.
1.620″ I.D.

from

$10.99

9.5″ GM C/clip.

Product Features:

c-clip for GM 9.5″

from

$207.99

Drive shaft slip yoke vibrating, clunking or failed completely- This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:

Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
Effective fix – replacement restores safe, smooth driveline operation
Rigorously tested – designed and evaluated to assure safe, reliable operation
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$226.99

Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 8.5″ and 8.6″
30 spline
Mechanics 3R u-joint size
2.556″ snap ring span
1.125″ cap diameter
Inside snap ring design
Strap style

from

$73.99

8.25″ IFS (99 & newer) stub axle side seal (2 needed).Yukon Mighty seal.

Product Features:

Front stub axle seal
Fits 1999 and up GM 8.25″ IFS

from

$447.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$1769.99

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$1594.99

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$1120.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$1094.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

In-Demand Transfer Cases for 2016 GMC Sierra 1500s

Select from 25 premium Transfer Cases parts for your 2016 GMC Sierra 1500, with prices ranging from $11.29 to $395.99.

show more show less

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$14.99

This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:

Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
Effective fix – restores a tight seal in the transfer case after original gasket fails
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$13.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$59.99

ACDelco GM Original Equipment Vehicle Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$15.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$46.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$17.49

Product Features:

Brand may vary by location

from

$395.99

Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:

Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
100% new – this transfer case motor is entirely new, not remanufactured like competitors
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$51.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$27.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$19.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$49.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$47.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$33.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$319.99

TCaseBrg-SealKit

from

$297.99

TCasePlanetaryCrrier

from

$119.99

TCaseOilPumpHousing

from

$118.99

Vehicles with controllable 4-wheel drive systems will typically have a transfer case which allows engagement and disengagement of the 4-wheel drive system. In order for the automatically controlled system to operate the exact location of the transfer case is required for safety and system reliability.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$48.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$42.99

Design type: spring loaded; multi-lip
-40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$24.79

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

TCaseInputShaftSeal

from

$14.79

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$14.49

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

Most Sold 2016 GMC Sierra 1500 4WD Components

Explore our best-selling GMC parts for the 2016 Sierra 1500 among 1 OEM and aftermarket options starting from $217.99.

show more show less

from

$217.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
Smart solution – delivers reliable fit and function for competitive price
Trustworthy quality – backed by team of designers and engineers in the United States

Top-Rated Drivetrains Brands For Your 2016 GMC Sierra 1500

Shop for the best-rated brands offering Drivetrains and other products for your 2016 GMC Sierra 1500s. Below you’ll find some of our best rated Drivetrains from Spicer, National, and Driveworks, and more. Drivetrains from these brands that fit a 2016 Sierra 1500 start at just $10.99 and are rated as high as 4.6 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Spicer 2016 GMC Sierra 1500 Drivetrains

When it comes to maintaining or upgrading your 2016 GMC Sierra 1500, using quality Drivetrains is essential to ensure durability and a perfect fit. Spicer ticks all of those boxes. We offer a wide selection of Spicer Drivetrains, specifically designed for the 2016 GMC Sierra 1500. With over 3 Spicer brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $45.99, with an average price of just $49.99. Plus, with over 14 customer reviews and an average rating of 4.6 stars, you can trust that our Spicer Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $54.99

(1)

Universal Joint

“Spicer U joints are great. These are actual OE parts on my truck.”

from $45.99

(10)

Universal Joint, Greaseable 1410 Series

“Went in perfect”

from $48.99

(3)

Universal Joint

“Worked fine. Good service. They only pulled 1 part but the counter person went back retrieved what was necessary and completed the order quickly.”

Popular National 2016 GMC Sierra 1500 Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 2016 GMC Sierra 1500 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2016 Sierra 1500, Advance Auto Parts carries a full inventory of 3 National Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these National Drivetrains range from $11.99 to $43.99, plus, with more than 26 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $43.99

(2)

Shaft Repair Sleeve

“As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”

from $21.99

(22)

Multi-Purpose Seal

“Works as expected.”

from $11.99

(2)

Bearing Race

“Reasonable price and woks well. front diff 2006 Escalade esv”

FAQs for 2016 GMC Sierra 1500 Drivetrains

Which Drivetrains are best-sellers for 2016 GMC Sierra 1500s?

Out of 338 Drivetrains that fit 2016 GMC Sierra 1500s, the following parts are the top sellers:

Greaseable Premium Universal Joint (10086738) – $42.99
New CV Axle Shaft Assembly (10123395) – $169.99
Greaseable Super Strength Universal Joint (10086981) – $56.99

What’s the price range for 2016 GMC Sierra 1500 Drivetrains?

Drivetrain prices for the 2016 GMC Sierra 1500 start at $2.99 and go up to $3,014.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2016 GMC Sierra 1500?

The average price for Drivetrains for the 2016 GMC Sierra 1500 is $331.49. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other GMC Sierra 1500 model years?

Yes, we currently carry Drivetrains for 26 model years of GMC Sierra 1500s between 1999 and 2026. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2015, and 2014.

What are the cheapest Drivetrains for my 2016 GMC Sierra 1500?

The cheapest 2016 GMC Sierra 1500 Drivetrains we carry in stock are:

Ring Gear Bolt (20520168) – $2.99
Differential Crush Sleeve (20520169) – $2.99
8.6" GM Standard Open Side Gear Thrust Washer (11642509) – $4.99
Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (11643342) – $5.99
Pinion Gear And Thrust Washer For 8.25" GM IFS (11642378) – $5.99

What are the top-rated Drivetrains that fit the 2016 GMC Sierra 1500?

Out of 12,262 reviews by customers, our 2016 GMC Sierra 1500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2016 GMC Sierra 1500 and their top-rated products:

Universal Joints
- Universal Joint (10841132) – $48.99
- Greaseable Super Strength Universal Joint (10086981) – $56.99
- Greaseable Premium Universal Joint (10086907) – $46.99

What types of Drivetrains do you sell for my 2016 GMC Sierra 1500?

As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 2016 GMC Sierra 1500:

Can I get help with 2016 GMC Sierra 1500 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.

What is your return policy for GMC Sierra 1500 Drivetrains?

Advance Auto Parts keeps returns simple. For new GMC Sierra 1500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 GMC Sierra 1500 Drivetrains

Cardone – Remanufactured Transfer Case Motor (Part No.48-105)

National – Multi-Purpose Seal (Part No.710668)

MOOG – Differential Carrier Bushing (Part No.K201736)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55028-1)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

National – Transfer Case Input Shaft Seal (Part No.710831)

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

USA Standard Gear – TCaseBrg-SealKit (Part No.71674)

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Yukon Gear – Polished Aluminum Cover For 8.6", 8.2" And 8.5" GM Rear (Part No.32030)

Powertrax – No-Slip Traction System (Part No.9207053000)

Spartan – Drive Axle Assembly; GM 1500 P/U GU5 2009 Rear Axle (Part No.RAX0209A)

Motive Gear – Differential Spool (Part No.FS10-30)

Dorman – 4 Wheel Drive Differential Actuator (Part No.600-118)

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Dorman – Axle Shaft – or Side (Part No.630-324)

Victor Reinz – Transfer Case Gasket (Part No.71-14107-00)

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

Yukon Gear – 8.25" GM IFS Pinion Seal (88 And Up) (Part No.30278)

Yukon Gear – Ring and Pinion Kit (Part No.24696)

Yukon Gear – 8.25" IFS (99 & Newer) Stub Axle Side Seal (Part No.30273)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6063)

National – Multi-Purpose Bearing (Part No.B-2010)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Master Overhaul Kit For ’14 & Up GM 9.5" 12 Bolt Differential (Part No.14217)

Dorman – 4WD Differential Housing (Part No.600-211)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)

Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55480)

National – Bearing Race (Part No.LM501314)

Driveworks – Taper Bearing Cone (Part No.S-LM-501349)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

National – Shaft Repair Sleeve (Part No.99193)

Powertrax – Grip LS Traction System (Part No.LS201030)

Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)

National – Multi-Purpose Bearing (Part No.A-36)

Motive Gear – Differential Ring and Pinion (Part No.GM10-373)

Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Motive Gear – Pinion Nut (Part No.1260823)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

Motive Gear – Ring Gear Bolt (Part No.14066913)

Yukon Gear – Differential Cover B (Part No.33572)

Yukon Gear – Ring Gear Bolt (Part No.33049)

MOOG – Front Left Differential Support Bracket (Part No.RK643171)

Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

Dorman – Position Differential Support (Part No.523-240)

Yukon Gear – GM 9.76" & ’14 & Up GM 9.5" 12 Bolt Cover Gasket (Part No.23029)

Dorman – Suspension Differential Mount Bushing (Part No.523-071)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.295)

Driveworks – Universal Joint (Part No.DW-534G)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.330)

Spicer – Universal Joint (Part No.5-795X)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

Driveworks – Universal Joint (Part No.DW-331)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Spicer – Universal Joint, Greaseable S44/3R Series (Part No.5-3147X)

Driveworks – Universal Joint (Part No.DW-235)

Driveworks – Universal Joint (Part No.DW-330)

Dorman – Help – U-Joint Repair Kit (Part No.81001)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.499)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.296)

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.439)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.299)

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

Spicer – Universal Joint (Part No.5-1410-1X)

Yukon Gear – Mechanics 3R U/Joint (Part No.42014)

Spicer – Universal Joint, Greaseable 1410 Series (Part No.5-160X)

National – Multi-Purpose Seal (Part No.710648)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513067)