2018 Ford Mustang Valve Cover and Cylinder Heads
More 2018 Ford Mustang Valve Cover and Cylinder Heads
Find your specific 2018 Ford Mustang original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2018 Ford Mustang Valve Cover and Cylinder Heads
Walker Products – Cyl. Head Temp Senso (Part No.A3035415005WKR)
from
$31.71
The Walker Cylinder Head Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)
from
$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0009)
from
$33.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)
from
$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0007)
from
$30.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1292)
from
$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1041)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1032)
from
$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72171)
from
$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72155)
from
$33.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 71324)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72137)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Edelbrock – Ford 429-460 Head Bolt Kit (Part No.8566)
from
$338.99
The Edelbrock #8566 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate t
See More
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72160)
from
$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72479)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)
from
$107.99Product Features:
- Highest Quality Head Bolts
- Cold-Formed/Heat Treated
- Ensures Molecular Integrity
- Reduced Diameter Bolt Heads
- Hardened/Parallel-Ground Washers Included
- Rated At 170000 psi
- Manufactured By ARP
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71173)
from
$67.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Edelbrock – Small-Block Ford E-Street Cylinder Heads 1.90" (Part No.5023)
from
$1408.99
The Edelbrock #5023 E-Street cylinder heads are designed for Ford 289-351 W V8 applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for e
Product Features:
See More
Product Features:
- Complete Pair
- 60cc Combustion Chamber Volume
- 170cc Intake/60cc Exhaust Runner Volume
- 1.9 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Spartan – Engine Cylinder Head; Ford 3.5/3.7 11-13 LFT Head (Part No.2FM2R)
from
$766.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – RPM Small-Block Ford 351 Cleveland Cylinder Head Hydraulic Flat Tappet (Part No.61629)
from
$1236.99
Product Features:
See More
- Very Streetable 190cc Intake Runners
- Compact Charge Combustion Chamber Design
- Chamber Increases Power ; Torque
- Intake/Exhaust Ports Based On 2V Design
- Optimized Spark Plug Location
- Improved Header Clearance
- Match with RPM Air-Gap Manifold PN[7564]
- Complete w/ 2.05 Int ; 1.60in. Exh Valves/Springs
Edelbrock – RPM Small-Block Ford 1.90" Cylinder Head Hydraulic Roller Camshaft (Part No.60225)
from
$1009.99
The Edelbrock #60225 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60225 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 60cc Combustion Chamber Volume
- 170cc Intake/60cc Exhaust Runner Volume
- 1.9 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft (Part No.79259)
from
$1363.99
The Edelbrock part #79259 Small Block Ford E-CNC 185 cylinder head is the ultimate in performance. This cylinder head is fully CNC ported for maximum horsepower and torque, making them ideal for high-performance’s street and light duty racing applications
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller/Mechanical Flat Tappet
- 59cc Combustion Chamber Volume
- 185cc Intake/75cc Exhaust Runner Volume
- 2.02 in. Intake/1.57 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – RPM Small-Block Ford 2.02" Cylinder Head Hydraulic Roller Camshaft (Part No.60255)
from
$1035.99
The Edelbrock #60255 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60255 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 60cc Combustion Chamber Volume
- 190cc Intake/60cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Victor Jr Small-Block Ford Cylinder Head (Part No.77169)
from
$744.99
Affordable, top quality. 500+ HP potential. High-flow 210cc intake ports. CNC gasket-matched part entries and exits.
Product Features:
See More
Product Features:
- Affordable; Top Quality
- 500+ hp Potential
- High-Flow 210cc Intake Ports
- CNC Gasket-Matched Part Entries/Exits
- Spark Plugs/Valves In The Stock Location
Spartan – Engine Cylinder Head; Ford 302 DOHC 32v 11-15 R Head (Part No.2FFQR)
from
$909.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – RPM Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet Cam (Part No.60229)
from
$973.99
The Edelbrock #60229 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60229 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th
Product Features:
See More
Product Features:
- Out-of-the-Box Bolt-On Performance
- Maximum Performance From Idle through Mid-Range
- Intake Valves Are For Use w/Stock Pistons
- Designed For Non-Emissions
Edelbrock – RPM Small-Block Ford 351 Cleveland Cylinder Head Hydraulic Roller Cam (Part No.61625)
from
$1276.99
The Edelbrock #61625 Performer RPM cylinder head is designed for use with 351C, 351M & 400M Ford engine applications. The Edelbrock #61625 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-p
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 60cc Combustion Chamber Volume
- 190cc Intake/90cc Exhaust Runner Volume
- 2.05 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Popular 2018 Ford Mustang Valve Cover and Cylinder Heads Categories
2018 Ford Mustang Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2018 Ford Mustang. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 4 different Valve Cover and Cylinder Heads in our inventory ranging from $9.99 to $1,293.99. That means you can find the exact parts or products you need to keep that 2018 Ford Mustang running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2018 Ford Mustang. Felpro, Carquest Premium, and Spartan are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2018 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2018 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2018 Ford Mustang Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2018 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
FAQs for 2018 Ford Mustang Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2018 Ford Mustang?
Out of 4 Valve Cover and Cylinder Heads for the 2018 Ford Mustang, the most popular in our inventory are:
from
$9.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
from
$1293.99
This product is not rated
Engine Cylinder Head; Ford 5.0 DOHC Left Head
Cylinder Heads
