2017 Lincoln Navigator Car Parts & Accessories

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Need a new third brake light assembly that looks, fits and performs like the original, without the hassle of going back to the dealership? This replacement was reverse-engineered to match the stock center high mount stop light on specific vehicles.

Product Features:

• Ideal replacement – this third brake light assembly was specifically designed to look and function like the original light on specific vehicles
• Quality construction – made from quality materials for excellent visibility and illumination
• Trustworthy design – backed by team of engineers and specialists in the United States
• Thoroughly tested – this part has undergone extensive testing to help ensure a secure fit and long service life

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount
• Quality construction – manufactured from premium materials for a long service life
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This body mount nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this body mount nut matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This trunk lid release switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this trunk lid release switch is made to match the fit and performance of the original switch on specific vehicle applications
• Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

This replacement liftgate glass hinge matches the fit, function and appearance of the original equipment hinge on specific vehicle applications. Made of quality materials, this hinge is designed for a reliable service life.

Product Features:

• Ideal replacement – this liftgate glass hinge directly replaces the original equipment hinge on specific vehicles
• Durable construction – this hinge is made of quality materials to match the original equipment finish
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

• The Motorcraft Interior Lamp Switch Assembly is the spring-loaded plunger design electrical switch that is mounted in the vehicle door frame and operates the on/off function of the interior -courtesy light- when the door is opened or closed.
• Motorcraft Interior Lamp Switch Assembly is engineered and manufactured to exact Ford OE specifications to ensure O.E. quality and performance.
• As with all Motorcraft after market parts, any engineering innovations or product improvements that have been developed since the vehicle’s assembly are added to the Interior Lamp Switch Assembly, ensuring the most current technology.

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Convenient pack – this value pack includes the left and right door lock actuator motors for certain popular vehicle applications
• Perfect fit – engineered to provide the same fit and function of the original equipment actuator motors
• Safety compliant – parts have undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

The original equipment window regulator fails when the plastic window slide block fatigues and cracks. This Dorman OE FIX replacement motor and regulator assembly incorporates a redesigned slide block for significantly greater durability.

Product Features:

• Improved replacement – this motor and regulator assembly features enhancements over the original design for greater reliability
• Failure-resistant design – incorporates redesigned window slide block for significantly greater durability than the original equipment design
• Simple replacement – no special tools are required to install this regulator assembly
• Quality engineering – this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing

Motorcraft window regulators and regulator assemblies are designed to provide perfect fit and easier, faster installation. They also include the latest innovations and engineering upgrades.

Product Features:

• Pre-lubricated for quiet operation
• Attachment points line up with the vehicle door and glass holes, providing a quality installation
• To help ensure smooth travel and optimal window speeds, regulator and glass paths are matched
• Durability tested

Motorcraft window regulators and regulator assemblies are designed to provide perfect fit and easier, faster installation. They also include the latest innovations and engineering upgrades.

Product Features:

• Pre-lubricated for quiet operation
• Attachment points line up with the vehicle door and glass holes, providing a quality installation
• To help ensure smooth travel and optimal window speeds, regulator and glass paths are matched
• Durability tested

New Standard Replacement Rear Bumper Step Pad

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Door Lock Actuator

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

• Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
• Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

This automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this automatic transmission valve body sealing sleeve is designed to match the fit and function of the original sleeve on specified vehicles
• Restores functionality – reliable replacement for a missing part that has failed due to plastic cracks and O-ring leaks
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Brand may vary by location

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Product Features:

• Brand may vary by location

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

• Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
• Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This replacement conductor plate for automatic transmissions is engineered to match the function and durability of the stock part on specified vehicles.

Product Features:

• Ideal replacement – this automatic transmission conductor plate directly replaces the original part on specified vehicle years, makes and models
• Durable construction – this part is made from quality materials for durability
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
• Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 11-22; LINCOLN 15-17;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2022
• Weight approx: 9 Lbs

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials & design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

• For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
• For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads & longer life.

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

New Platinum Pro Automatic Transmission Oil Cooler Assembly, With Tow Package, Up To 12/04/2007 Production Date

Product Features:

• With Tow Package, Up To 12/04/2007 Production Date
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles.

Product Features:

• They work with various systems, including Anti-Lock Brake System (ABS)
• Recommended by Ford Motor Company

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 11-22; LINCOLN 15-21;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2022
• Weight approx: 7 Lbs

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

• For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
• The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
• Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
• Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
• Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
• Installs in the window channel for a sleek, aerodynamic appearance
• Made from durable, impact-resistant acrylic
• Available in dark smoke finish

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Autocraft Easy Fit SUV cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with full elastic, double stitched hem, reinforced grommets and rope to ensure a better and secure fit. Bag included for convenient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Lightweight, breathable, non-abrasive fabric
• Water repellent coating, protects against mold and mildew
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through
• Bag included for easy storage

Autocraft Easy Fit SUV cover offers excellent protection for your vehicles. 3 layers construction includes reflective UV resistant layer, water resistant layer and non-abrasive soft inside layer. The construction does not only prevent your vehicles from scratching but also protects against mold and mildew. Suitable for indoor and outdoor use. It designed with a full elastic, ultrasonic sewn hem and reinforced grommets to ensure a better fit and extreme durability. Bag included for convient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Medium weight, breathable, non-abrasive fabric for indoor and outdoor use
• Water resistant layer, protects against mold and mildew
• UV treatment protects vehicle from sun damage
• Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soaking into the hole that you cut for antenna
• Bag included for easy storage

The Rightline Gear Car Back Carrier is a patented cargo bag that attaches to the rear of your vehicle, WITH or WITHOUT a roof rack. The perfect solution for those who engage in paddle sports, snow sports, or cycling. Keep your gear on the roof and your cargo on the back! The location of the Carrier allows for easy access and also shields it from the wind, saving you $$$ at the gas pump. The Carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The bottom pole frame provides structural support for the cargo in the bag. The Rear Car Clips attach the Car Back Carrier to the rear hatch door on vehicles without a roof rack.

Product Features:

• Capacity: 13 cu ft
• Dimensions: 40″ L x 20″ W x 28″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% Waterproof with welded seams and a urethane coated zipper
• Includes: carrier, bottom pole frame, (2) Rear Car Clips, (1) 2″ W belt strap, (2) 1″ W bottom straps, and stuff sack with sewn-in set up guide
• PVC Mesh (polyester re-enforced PVC) and Hydrotuff Material (PVC-backed polyester), UV resistant
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Install on vehicles WITHOUT a roof rack with Cargo Saddlebag Car Clips (purchased separately)
• Bottom pole frame provides structure and rigidity for the bag
• Includes: Cargo Saddlebag, bottom pole frame, (1) 2″ W belt strap, (2) 1″ W bottom straps, stuff sack, and sewn-in set up guide

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicle interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid-Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel.  They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision-machined to perfectly fit your vehicle window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. (U.S. Department of Transportation) approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

• Offers Maximum Fresh Air Enjoyment
• Optically Transparent OEM Quality
• Sleek Aerodynamic Styling
• Reduced Wind Noise
• No Unsightly Exterior Tape
• Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
• Precision Machined To Perfectly Fit Your Vehicle
• Installed Inside The Window Channel

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Dimensions: 36″ L x 32″ W x 15″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• Weatherproof + with welded seams and a urethane coated zipper
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid-Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid-Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M(TM) automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicle Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

Pants Saver Custom Fit 4pc Car floor Mat Set for Lincoln Navigator 2017 ,Tan : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Lincoln Navigator 2017 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
• Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
• Odorless and suitable for All Weather. Proudly Made In North America
• Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
• Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

Seat Switch

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Heated seats not working properly? The seat heater control module on certain Ford and Lincoln vehicles can be damaged from moisture and burn out over time, preventing the heated seats from operating properly. When that happens, if you try get a replacement from the dealership, you often have to buy the module and required pigtail connector separately. This complete kit includes both the module and the connector for a convenient, money-saving, reliable repair solution.

Product Features:

• Convenient solution – this cost-effective seat heater control module with pigtail kit includes a replacement module and pigtail, saving hassle and expense of buying the two components separately from the dealer
• Restores functionality – when the original ground pin or pigtail connector fails, this direct replacement kit restores the comfort and convenience of heated seats to original standards
• Seamless replacement – module designed and tested to work exactly like the factory components for millions of select Ford and Lincoln vehicles
• Trustworthy quality – backed by a team of electrical engineers and product experts in the United States and more than a century of automotive experience

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

Seat Switch

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

BODY FASTENER