2017 Ford Mustang Valve Cover and Cylinder Heads
More 2017 Ford Mustang Valve Cover and Cylinder Heads
Find your specific 2017 Ford Mustang original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2017 Ford Mustang Valve Cover and Cylinder Heads
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8993 PT-1)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.520 SD)
from
$41.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26308 PT)
from
$95.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5807G)
from
$75.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
Mahle – Cyl. Head Bolt Set (Part No.A3031566828MAH)
from
$68.99
Cyl. Head Bolt Set
Mahle – Cyl. Head Bolt Set (Part No.A30311335709MAH)
from
$92.08
Cyl. Head Bolt Set
Dorman – STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (sold by each) (Part No.675-131)
from
$3.99
Cylinder head bolt stripped or broken? This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – designed to match the fit and function of the original cylinder head bolt on certain vehicles
- Corrosion resistant – withstands elements for reliable service life
- Application specific – made to hold cylinder head in place on specific vehicles
- Trustworthy quality – backed by team of engineers and inspectors in United States
Felpro – Cylinder Head Gasket Set (Part No.HS 8857 PT-8)
from
$161.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
Felpro – Cylinder Head Gasket Set (Part No.HS 8554 PT)
from
$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket Set (Part No.HS 9790 PT-7)
from
$151.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 8993 PT-2)
from
$62.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 26308 PT)
from
$221.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Walker Products – Cyl. Head Temp Senso (Part No.A3035415005WKR)
from
$31.71
The Walker Cylinder Head Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1041)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)
from
$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0009)
from
$33.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)
from
$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71173)
from
$67.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72479)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72155)
from
$33.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Mr. Gasket – Ultra Seal: Cylinder Head Bolts (Part No.950G)
from
$32.99
These grade 8 alloy steel, longer length bolts are designed to compensate for thread length lost when using head bolt washers. This allows increased torque and clamping. Set of 10 does one cylinder head.
Product Features:
See More
Product Features:
- Cylinder Head Bolts
- Longer-Than-Stock
- High Quality Grade 8 Alloy
- Increase Torque Settings
- Higher Clamp Loads On Gasket
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Edelbrock – RPM Small-Block Ford 351 Cleveland Cylinder Head Hydraulic Flat Tappet (Part No.61629)
from
$1236.99
Product Features:
See More
- Very Streetable 190cc Intake Runners
- Compact Charge Combustion Chamber Design
- Chamber Increases Power ; Torque
- Intake/Exhaust Ports Based On 2V Design
- Optimized Spark Plug Location
- Improved Header Clearance
- Match with RPM Air-Gap Manifold PN[7564]
- Complete w/ 2.05 Int ; 1.60in. Exh Valves/Springs
Spartan – Engine Cylinder Head; Ford 351W 69-74 Cyl Head (Part No.2F92)
from
$344.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – RPM Small-Block Ford 351 Cleveland Cylinder Head Hydraulic Roller Cam (Part No.61625)
from
$1276.99
The Edelbrock #61625 Performer RPM cylinder head is designed for use with 351C, 351M & 400M Ford engine applications. The Edelbrock #61625 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-p
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 60cc Combustion Chamber Volume
- 190cc Intake/90cc Exhaust Runner Volume
- 2.05 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet (Part No.60329)
from
$1035.99
50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.
Product Features:
See More
Product Features:
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- Intake Valves Are For Use w/Stock Pistons
Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft (Part No.5027)
from
$1751.99
The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex
Product Features:
See More
Product Features:
- Complete Pair For Mechanical and Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 205cc Intake/62cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft (Part No.79259)
from
$1363.99
The Edelbrock part #79259 Small Block Ford E-CNC 185 cylinder head is the ultimate in performance. This cylinder head is fully CNC ported for maximum horsepower and torque, making them ideal for high-performance’s street and light duty racing applications
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller/Mechanical Flat Tappet
- 59cc Combustion Chamber Volume
- 185cc Intake/75cc Exhaust Runner Volume
- 2.02 in. Intake/1.57 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Popular 2017 Ford Mustang Valve Cover and Cylinder Heads Categories
2017 Ford Mustang Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2017 Ford Mustang. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 12 different Valve Cover and Cylinder Heads in our inventory ranging from $9.99 to $928.99. That means you can find the exact parts or products you need to keep that 2017 Ford Mustang running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2017 Ford Mustang. Felpro, Carquest Premium, and Mahle are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2017 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2017 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2017 Ford Mustang Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2017 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
FAQs for 2017 Ford Mustang Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2017 Ford Mustang?
Out of 12 Valve Cover and Cylinder Heads for the 2017 Ford Mustang, the most popular in our inventory are:
