2017 Ford Expedition Steering and Chassis Parts

Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 2017 Expedition. Advance Auto Parts has popular Expedition parts like Ball Joints, Steering Shafts, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Expedition model years including 2014, 2015, 2016, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2017 Ford Expedition Steering and Chassis Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2017 Ford Expedition Steering and Chassis Parts Categories

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Alignment Caster Adjustment Spacers

Caster and Camber Kits

Power Steering Pressure Hoses

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Essential Steering and Chassis Parts for 2017 Ford Expeditions

from

$270.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$1004.99

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$131.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of under hood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$32.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$73.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$7.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
Compatible with OEM cooler systems
Made of brass
Quality construction

from

$205.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$88.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$46.49

Ball Joint

from

$53.99

Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$52.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$83.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$21.99

This suspension stabilizer bar bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$27.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$17.99

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$42.49

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$124.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$23.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$18.79

from

$44.99

from

$102.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$42.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$199.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$60.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$74.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$87.99

Allows up to 2 Degrees caster change

Upgrade your 2017 Ford Expedition with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2017 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Steering and Chassis Parts for the 2017 Ford Expedition, designed to meet your needs without breaking the bank. From Ball Joint replacements to Steering Shafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2017 Ford Expedition at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $13.29 to $1,004.99, with an average price of $131.85. Our 58 Steering and Chassis Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2017 Ford Expedition without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Ford Expedition, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, Driveworks, and more. Moog Steering and Chassis Parts start at just $72.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $46.49, and at an average 4.4 stars rating. With 870 customer reviews and counting, our 2017 Ford Expedition Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place. Start shopping confidently below for your 2017 Ford Expedition!

Best-Selling Ball Joints for 2017 Ford Expeditions

Enhance the driving experience in your Ford with 24 quality Ball Joint components, starting at $45.99.

show more show less

from

$72.99

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT: Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates

from

$122.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation

from

$163.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION – Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$163.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION – Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$46.49

Ball Joint

from

$122.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$149.99

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$149.99

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$57.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$66.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
GREASEABLE SOCKETá- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$59.99

PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

from

$251.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$280.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$262.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$851.99

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$159.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$159.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$119.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$103.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$103.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$79.99

PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$53.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$45.99

CTRL ARM W/BALL JNT

Top Picks for 2017 Ford Expedition Sway Bars

Upgrade Ford Expeditions with top-quality Sway Bars parts, including 9 OEM and aftermarket selections for your 2017 model.

show more show less

from

$49.99

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$38.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$59.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$27.99

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$18.29

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$13.29

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$104.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$82.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$29.49

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

In-Demand Power Steering Parts for 2017 Ford Expeditions

Select from 12 premium Power Steering Parts parts for your 2017 Ford Expedition, with prices ranging from $13.99 to $1,004.99.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$58.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$162.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$133.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$1004.99

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$131.99

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$103.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$91.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures

from

$53.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$40.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$13.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

Most Sold 2017 Ford Expedition Tie Rods

Explore our best-selling Ford parts for the 2017 Expedition among 8 OEM and aftermarket options starting from $38.49.

show more show less

from

$93.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$93.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$135.99

RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$102.99

RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$81.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$199.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$199.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$38.49

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

Top-Rated Steering and Chassis Parts Brands For Your 2017 Ford Expedition

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2017 Ford Expeditions. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2017 Expedition start at just $46.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2017 Ford Expedition Steering and Chassis Parts

When it comes to maintaining or upgrading your 2017 Ford Expedition, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2017 Ford Expedition. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $72.99, with an average price of just $119.99. Plus, with over 40 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $122.99

(18)

Front Right Upper Suspension Control Arm and Ball Joint Assembly

“Great product”

from $163.99

(13)

Front Right Upper Suspension Control Arm and Ball Joint Assembly

“Hooked up in no time”

from $72.99

(9)

Suspension Ball Joint

“Quality part.”

Popular Carquest Premium 2017 Ford Expedition Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2017 Ford Expedition owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2017 Expedition, Advance Auto Parts carries a full inventory of 1 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range up to $49.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $49.99

(3)

Sway Bar Link

“This Stabilizers Bar link fit perfectly on my 2011 f150, great product.”

FAQs for 2017 Ford Expedition Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2017 Ford Expeditions?

Out of 58 Steering and Chassis Parts that fit 2017 Ford Expeditions, the following parts are the top sellers:

Suspension Ball Joint (21880504) – $72.99
Tie Rod End (11919636) – $93.99
Tie Rod End (11919574) – $93.99

What’s the price range for 2017 Ford Expedition Steering and Chassis Parts?

Steering and Chassis Part prices for the 2017 Ford Expedition start at $13.29 and go up to $1,004.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2017 Ford Expedition?

The average price for Steering and Chassis Parts for the 2017 Ford Expedition is $131.85. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Expedition model years?

Yes, we currently carry Steering and Chassis Parts for 26 model years of Ford Expeditions between 1997 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2017 Ford Expedition?

The cheapest 2017 Ford Expedition Steering and Chassis Parts we carry in stock are:

Suspension Stabilizer Bar Bushing Kit (11620203) – $13.29
Power Steering Filter (50308546) – $13.99
Bearing Race (5052505) – $14.99
Suspension Stabilizer Bar Bushing Kit (11620237) – $18.29
Suspension Stabilizer Bar Bushing Kit (11620347) – $27.99

What are the top-rated Steering and Chassis Parts that fit the 2017 Ford Expedition?

Out of 870 reviews by customers, our 2017 Ford Expedition Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2017 Ford Expedition and their top-rated products:

Alignment Hardware
- Alignment Caster / Camber Kit (10017963) – $60.99
- Alignment Caster / Camber Kit (21880540) – $86.99
Sway Bars
- Alignment Caster / Camber Kit (10017963) – $60.99
- Alignment Caster / Camber Kit (21880540) – $86.99

What types of Steering and Chassis Parts do you sell for my 2017 Ford Expedition?

As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2017 Ford Expedition:

Can I get help with 2017 Ford Expedition Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Expedition Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Expedition Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2017 Ford Expedition Steering and Chassis Parts

Dorman – Upper Steering Shaft (Part No.425-387)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Electric (Part No.201-0178ECQ)

Dorman – Power Steering Fluid Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-846)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-0058F)

National – Bearing Race (Part No.M802011)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male Captive "O" Ring x 16mm Swivel "O" Ring – with Switch Port (Part No.37458)

Imperial – Quick Connect Coupler (Part No.240250)

Carquest Premium – Lower Control Arm with Ball Joint (Part No.820-322413B)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK621801)

Driveworks – Ball Joint (Part No.DW-K500008)

Carquest Premium – Lower Ball Joint: Front (Part No.410-290714)

MOOG – Alignment Caster / Camber Kit (Part No.K8740)

MOOG – Alignment Caster / Camber Kit (Part No.K100350)

Dorman – Suspension Stabilizer Bar Bushing (Part No.533-529)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201486)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201305)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5151R)

Rare Parts – Sway Bar Link (Part No.RP19441)

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80239)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" Male "O" Ring x 3/8" I.D. Hose (Part No.35298)

Carquest Premium – Power Steering Return Hose Assembly, 9mm Male Captive "O" Ring x 3/8" I.D. Hose (Part No.37500)

MOOG – Steering Tie Rod End (Part No.ES800515)

Rare Parts – Tie Rod End (Part No.RP25008)

Rare Parts – Tie Rod End (Part No.RP29011)

MOOG – Alignment Caster / Camber Kit (Part No.K100025)

MOOG – Alignment Caster / Camber Kit (Part No.K100070)

MOOG – Alignment Caster / Camber Kit (Part No.K80069)

MOOG – Suspension Ball Joint (Part No.K500008)

MOOG – Front Right Upper Suspension Control Arm and Ball Joint Assembly (Part No.RK80308)

MOOG – Front Right Upper Suspension Control Arm and Ball Joint Assembly (Part No.CK80308)

MOOG – Front Left Upper Suspension Control Arm and Ball Joint Assembly (Part No.CK80306)

Driveworks – Ball Joint (Part No.DW-K500008)

MOOG – Front Left Upper Suspension Control Arm and Ball Joint Assembly (Part No.RK80306)

Carquest Premium – Control Arm with Ball Joint (Part No.810-258591B)

Carquest Premium – Upper Control Arm with Ball Joint (Part No.810-258590B)

Carquest Premium – Lower Ball Joint: Front (Part No.410-258607)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK622137)

MOOG – Suspension Ball Joint (Part No.K500166)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622961)

MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622962)

Dorman – Suspension Control Arm (Part No.526-291)

Dorman – Suspension Control Arm (Part No.526-292)

MOOG – Rear Lower Rearward Suspension Control Arm and Ball Joint Assembly (Part No.RK622590)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11344)

Rare Parts – Control Arm Assembly (Part No.RP11345)

Rare Parts – Ball Joint (Part No.RP10781)

Dorman – Suspension Control Arm (Part No.520-285)

Dorman – Suspension Control Arm (Part No.520-286)

MOOG – Suspension Ball Joint (Part No.K500450)

Carquest Premium – Lower Ball Joint: Front (Part No.410-290714)

Carquest Premium – CTRL ARM W/BALL JNT (Part No.800-711944B)

Dorman – Lower Steering Shaft (Part No.425-396)

Carquest Premium – Sway Bar Link (Part No.510-258596)

MOOG – Suspension Stabilizer Bar Link (Part No.K750052)

MOOG – Suspension Stabilizer Bar Link (Part No.K750074)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201486)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201487)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201488)

Rare Parts – Sway Bar Link (Part No.RP15531)

Rare Parts – Sway Bar Link (Part No.RP19710)

Rare Parts – Sway Bar Frame Bushing (Part No.RP22743)

National – Bearing Race (Part No.M802011)

Carquest Premium – Power Steering Return Hose, 1/2" I.D. Hose x 1/2" I.D. Hose (Part No.40529)

Carquest Premium – Power Steering Pressure Hose, 11mm Male Captive "O" Ring x 14mm Male Captive "O" Ring (Part No.37830)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Return Hose, 11mm Male Captive "O" Ring x 1/2" Beaded Tube (Part No.38392)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Electric (Part No.201-0178ECQ)

Dorman – Power Steering Fluid Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-846)

Carquest Premium – 3/8" I.D. Molded Return Hose (Part No.40537)

Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)

Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)

Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)

Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)

Carquest Premium – Tie Rod End (Part No.310-258602)

Carquest Premium – Tie Rod End (Part No.310-258601)

MOOG – Steering Tie Rod End (Part No.ES800514)

MOOG – Steering Tie Rod End (Part No.ES800515)

MOOG – Steering Tie Rod End (Part No.EV801377)