2017 Ford Expedition Belts and Hoses

Name: Automatic Belt Tensioner
Brand: Dayco
SKU: 89237
Price: 61.99 USD
Rating: 4.5 (31 reviews)

Below you will find various in-demand Ford Belts and Hoses, components and accessories for your 2017 Expedition. Advance Auto Parts has popular Expedition parts like Heater Hoses, Radiator Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Expedition model years including 2014, 2015, 2016, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2017 Ford Expedition Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2017 Ford Expedition Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Essential Belts and Hoses for 2017 Ford Expeditions

from

$61.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$48.99

Litens was the Original Equipment (O.E.) supplier of this Ford /Lincoln tensioner and offers this “O.E. Exact”

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$52.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$81.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides maximum performance at extreme and prolonged operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity, and belt life.
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Replacing the tensioner is recommended (if the vehicle is equipped with one).

from

$127.99

This Litens Serpentine Belt Drive Component Kit fits 1997-2001 Ford E-150, E-250, E-350, F-150, F-250, F-350 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time.
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape.
Worn tensioners and idlers can cut belt life in half.

from

$118.99

This Litens Serpentine Belt Drive Component Kit fits 1997-2001 Ford Expedition / Lincoln Navigator w/4.6/5.4L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time.
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape.
Worn tensioners and idlers can cut belt life in half.

from

$173.99

This Litens Serpentine Belt Drive Component Kit fits 2005-2014 Ford Expedition, Explorer, F-150, F-250, F-350 / Mercury Mountaineer / Lincoln Navigator w/4.6/5.4L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time.
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape.
Worn tensioners and idlers can cut belt life in half.

from

$37.99

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$45.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed with tight manufacturing tolerances to deliver great durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals and other contaminants that can be found under the hood
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$51.99

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$27.49

HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$35.99

This HVAC heater hose retainer clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this HVAC heater hose retainer clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$26.99

Rein Automotive OE quality heater hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$24.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$1.29

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$95.99

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$37.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$37.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$45.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$80.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$68.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$145.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
EPDM tube; synthetic fiber knit reinforcement, EPDM cover resistant to heat, ozone and chemical refrigerants.
Manufactured using exact hose components from the Original Manufacturer (quick connects, branch/T connectors, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$36.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$53.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$65.99

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs.
Meets or exceeds all original equipment manufacturer specifications.
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$37.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

Upgrade your 2017 Ford Expedition with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2017 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Belts and Hoses for the 2017 Ford Expedition, designed to meet your needs without breaking the bank. From Heater Hose replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2017 Ford Expedition at great prices. Our Belts and Hoses inventory for this model ranges from just $1.29 to $136.99, with an average price of $59.73. Our 21 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2017 Ford Expedition without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Ford Expedition, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens Dayco, and more. Litens Belts and Hoses start at just $119.99 and boast an impressive 4.7 stars average rating from customers. With 2,570 customer reviews and counting, our 2017 Ford Expedition Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place. Start shopping confidently below for your 2017 Ford Expedition!

Best-Selling Heater Hoses for 2017 Ford Expeditions

Enhance the driving experience in your Ford with 6 quality Heater Hose components, starting at $1.29.

show more show less

from

$20.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$74.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic T-connector. This Dorman OE FIX replacement features an upgraded aluminum T-connector to prevent similar failures in the future.

Product Features:

Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$32.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$26.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$23.99

HEATER HOSE CONN.

from

$1.29

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

Top Picks for 2017 Ford Expedition Serpentine and V Belts

Upgrade Ford Expeditions with top-quality Serpentine and V Belts parts, including 8 OEM and aftermarket selections for your 2017 model.

show more show less

from

$32.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$15.79

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$25.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$40.99

The patented material provides maximum performance at extreme and prolonged operating temperatures.
The construction resists cracking and wear, even at extreme temperatures.
A special compound offers unparalleled flexibility, stability, load capacity, and belt lifespan.
A problem-solving tool designed for the most challenging applications
It consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
It is recommended to replace the tensioner (if equipped).

from

$34.99

SERPENTINE BELT

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$114.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads & temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety.
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair

from

$34.49

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs.
Meets or exceeds all original equipment manufacturer specifications.
It is recommended to replace the tensioner (if equipped).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

In-Demand Pulleys for 2017 Ford Expeditions

Select from 1 premium Pulleys parts for your 2017 Ford Expedition.

show more show less

from

$29.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

Most Sold 2017 Ford Expedition Belt Tensioners

Explore our best-selling Ford parts for the 2017 Expedition among 3 OEM and aftermarket options starting from $89.99.

show more show less

from

$119.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Ford / Lincoln applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$127.99

DRIVE BELT TENSIONER

from

$89.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

Top-Rated Belts and Hoses Brands For Your 2017 Ford Expedition

Shop for the best-rated brands offering Belts and Hoses and other products for your 2017 Ford Expeditions. Below you’ll find some of our best rated Belts and Hoses from Litens and Dayco, and more. Belts and Hoses from these brands that fit a 2017 Expedition start at just $29.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2017 Ford Expedition Belts and Hoses

When it comes to maintaining or upgrading your 2017 Ford Expedition, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2017 Ford Expedition. With over 1 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $119.99. Plus, with over 1 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $119.99

(1)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Worked great on my 2011 mustang.”

Popular Dayco 2017 Ford Expedition Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2017 Ford Expedition owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2017 Expedition, Advance Auto Parts carries a full inventory of 2 Dayco Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dayco Belts and Hoses range from $29.99 to $32.99, plus, with more than 256 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $32.99

(5)

Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count

“OEM top of the line serpentine belt, what can I say? Perform like the original. Good price with using coupon.”

from $29.99

(251)

Idler Pulley, Dayco

“The old pulley froze and took the belt with it. Advanced having them in stock got me home without a tow.”

FAQs for 2017 Ford Expedition Belts and Hoses

Which Belts and Hoses are best-sellers for 2017 Ford Expeditions?

Out of 21 Belts and Hoses that fit 2017 Ford Expeditions, the following parts are the top sellers:

Heater Hose Connector 3/4 x 3/4 (10226276) – $20.99
Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (10062406) – $15.79
Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (12482924) – $25.99

What’s the price range for 2017 Ford Expedition Belts and Hoses?

Belts and Hose prices for the 2017 Ford Expedition start at $1.29 and go up to $136.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2017 Ford Expedition?

The average price for Belts and Hoses for the 2017 Ford Expedition is $59.73. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford Expedition model years?

Yes, we currently carry Belts and Hoses for 27 model years of Ford Expeditions between 1997 and 2025. Belts and Hoses are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 2017 Ford Expedition?

The cheapest 2017 Ford Expedition Belts and Hoses we carry in stock are:

Straight Heater Hose; EPDM Rubber, 3/8 Inch Diameter (sold by foot) (10844588) – $1.29
Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (10062406) – $15.79
Heater Hose Connector 3/4 x 3/4 (10226276) – $20.99
HEATER HOSE CONN. (50327879) – $23.99
Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (12482924) – $25.99

What are the top-rated Belts and Hoses that fit the 2017 Ford Expedition?

Out of 2,570 reviews by customers, our 2017 Ford Expedition Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2017 Ford Expedition and their top-rated products:

Belt Tensioners
- Accessory Drive Belt Tensioner – Original Equipment Quality (11187709) – $119.99
Serpentine and V Belts
- Accessory Drive Belt Tensioner – Original Equipment Quality (11187709) – $119.99

What types of Belts and Hoses do you sell for my 2017 Ford Expedition?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 2017 Ford Expedition:

Can I get help with 2017 Ford Expedition Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford Expedition Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford Expedition Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2017 Ford Expedition Belts and Hoses

Dayco – Automatic Belt Tensioner (Part No.89237)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999544A)

Gates – Micro-V Serpentine Drive Belt (Part No.K061015)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061025HD)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999266B)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999266A)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999544H)

Litens – Idler Pulley: Direct Fit, Steel, 87mm Diameter (Part No.900598A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.36157)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900007A)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (OE Fix) (Part No.800-409HP)

Dorman – Engine Coolant Hose Clip (Part No.800-807)

Dorman – Heater Hose Connector 3/4 x 3/4 (Part No.800-418)

Rein – Heater Hose (Part No.CHH0789)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 Inch Length (Part No.87855)

Dayco – Straight Heater Hose; EPDM Rubber, 3/8 Inch Diameter (sold by foot) (Part No.80259)

Yukon Gear – Seal Puller Tool (Part No.56063)

Rein – Radiator Hose (Part No.CHR0764)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.75" Diameter (Part No.D71964)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 29.25" Long, 1.72" Diameter (Part No.E72382)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.50" Diameter (Part No.E72352)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.50" Diameter (Part No.E72520)

Rein – Radiator Hose (Part No.CHR0765)

Gates – Premium Modular Coolant Hose (Part No.22294)

Dayco – Poly Rib Belt Serpentine Belt; 50 Long, 6 Rib Count (Part No.5060500)

Gates – Micro-V Serpentine Drive Belt (Part No.K061031)

Gates – Micro-V Serpentine Drive Belt (Part No.K061025)

Dayco – Poly Rib Belt Serpentine Belt; 100.59 Long, 6 Rib Count (Part No.5061005)

Dorman – Heater Hose Connector 3/4 x 3/4 (Part No.800-418)

Dorman – HEATER HOSE (Part No.626-838)

Dorman – Molded Heater Hose: Rubber (Part No.626-659)

Rein – Heater Hose (Part No.CHH0789)

Dorman – HEATER HOSE CONN. (Part No.800-416HP)

Dayco – Straight Heater Hose; EPDM Rubber, 3/8 Inch Diameter (sold by foot) (Part No.80259)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.44" Diameter (Part No.E72780)

Rein – Radiator Hose (Part No.CHR0764)

Dayco – Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (Part No.5060550)

Driveworks – Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (Part No.550K6)

Dayco – Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (Part No.4PK932EE)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060547HD)

Motorcraft – SERPENTINE BELT (Part No.JK6-553)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Serpentine Belt Kit With Belt, Tensioner, 2-Piece Set (Part No.5060550K1)

Gates – Micro-V Serpentine Drive Belt (Part No.K060547)

Dayco – Idler Pulley, Dayco (Part No.89144)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999461A)

Motorcraft – DRIVE BELT TENSIONER (Part No.BT-118)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89655)