2017 Chevrolet Colorado Wheels and Tires
More 2017 Chevrolet Colorado Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2017 Chevrolet Colorado, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2017 Chevrolet Colorado Wheels and Tires
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513067)
from
$32.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
REDI-Sensor – Rubber snap in stem with metal press clip teeth (Part No.SE54196)
from
$5.99
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Rubber snap-in stem
- Press clip design
- No tools for press clip installation
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 40 Pack (Part No.610-254.40)
from
$72.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
COAST TO COAST – 16 Inch, 6 Vent, Chrome Plated, Plastic, Set Of 4, Compatible With Steel Wheels (Part No.IWCIMP93X)
from
$129.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
- Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
- FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
- UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
- COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
- EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
COAST TO COAST – 17", 5 Spoke, Chrome Plated, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP405X)
from
$162.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
- Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
- FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
- UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
- COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
- EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome Cone Seat Style Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64014)
from
$26.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Dorman – Wheel Nut M12-1.50 Mag , Short – 13/16 In. Hex, 1.452 In. Length (Part No.611-104)
from
$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.406" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-341)
from
$40.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size) (Part No.84640)
from
$249.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
Dorman – Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each) (Part No.611-115)
from
$3.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut M12-1.50 Dometop – 19mm Hex, 36mm Length (Part No.611-084)
from
$2.99
The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There’s often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
Product Features:
See More
Product Features:
- Improved design – direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant – by removing the veneer of the OEM lug nut design there’s no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
- Easy to install
Driveworks – Wheel Hub Assembly (Part No.NT515104)
from
$175.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- Integral raceway provides proper clearance between the roller and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Broad range of designs and custom-tailored to specific applications and operating conditions
- ABS Components and Bearing Preload 100% Tested To OE Specs
- Premium seals, both inboard and outboard, protect the bearing
- Brand may vary by location
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.515110)
from
$301.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
McGard – Chrome Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24210)
from
$34.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)
from
$19.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Tuner, 1.66" Length, Chrome, 4 Locks/1 Key (Part No.712-380)
from
$33.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
COAST TO COAST – 16 Inch, Five V-Style Spoke, Painted Chrome, Abs Plastic, Set Of 4 (Part No.IWCIMP444X)
from
$157.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
- Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
- Manufactured with automotive grade ABS, Quality and durable product
- 27 hour CASS test, chrome plating tested to ensure quality and durability
- Center hub retention, secure fitment and easy to install
- EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
COAST TO COAST – 16 Inch, Five V-Style Spoke, Painted Black, Abs Plastic, Set Of 4 (Part No.IWCIMP444BLK)
from
$157.99
CCI Impostor wheel skins are an easy and affordable way to upgrade the trim level appearance of your vehicle. Constructed of ABS plastic and available in a variety of finishes, CCI Impostor wheel skins are simple to install and provide years of head-turning style. Pair them with CCI grille overlays, mirror covers and door handle covers to complete the look.
Product Features:
See More
Product Features:
- Designed and manufactured for quality fitment and finish
- Easy to install, long lasting finish
- Manufactured with automotive grade ABS, Quality and durable product
- Dual layer of clear, enhances and protects paint
- Center hub retention, secure fitment and easy to install
- EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
COAST TO COAST – 17", 5 Spoke, Gloss Black, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP405BLK)
from
$162.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
- Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
- FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
- UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
- COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
- EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
SKF – Axle Shaft Seal (Part No.K4021232396SKF)
from
$14.89
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
National – Wheel Seal (Part No.710710)
from
$31.49
Wheel Seal
Driveworks – Oil Seal (Part No.S-4762N)
from
$7.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.4762N)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 2017 Chevrolet Colorado Wheels and Tires Categories
2017 Chevrolet Colorado Wheels and Tires
You count on your 2017 Chevrolet Colorado to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 84 Wheels and Tires ranging in price from $2.29 to $7,321.99, you’re sure to find everything you need for your 2017 Chevrolet Colorado.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 14 different brands like Dorman, Autel, and Schrader. 2017 Chevrolet Colorado Wheels and Tires start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,959 extensive product reviews on 2017 Chevrolet Colorado Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.3 stars and Cylindrical Bearing with 4.7 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2017 Chevrolet Colorado below to get started!
Top-Rated Wheels and Tires Brands For Your 2017 Chevrolet Colorado
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2017 Chevrolet Colorado running right for years to come. In our inventory you’ll find brands like Dorman, Autel, Schrader, and even more.
Popular Dill Air Control Wheels and Tires
You’ll find popular Dill Air Control brand products across TPMS Sensor Kits. All are waiting to get your 2017 Chevrolet Colorado back on the road. Some of the top-rated Dill Air Control products in these categories are:
from
$3.49
(1)
Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece
Tire Pressure Sensor Service Kits
Top-Rated VDO REDI-Sensor Wheels and Tires
If VDO REDI-Sensor are what you’re looking for, our inventory holds plenty. We stock VDO REDI-Sensor brand Wheels and Tires for your 2017 Chevrolet Colorado, and some of our most reviewed VDO REDI-Sensor parts include:
FAQs for 2017 Chevrolet Colorado Wheels and Tires
What are the most purchased Wheels and Tires for the 2017 Chevrolet Colorado?
Out of 84 Wheels and Tires for the 2017 Chevrolet Colorado, the most popular in our inventory are:
from
$4.79
This product is not rated
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Flattop Capped, 1.752" Length, Chrome (Sold by each)
Wheel Lug Nuts
from
$3.79
This product is not rated
Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each)
Wheel Lug Nuts
What are the top-rated 2017 Chevrolet Colorado Wheels and Tires?
Top-rated Wheels and Tires for your 2017 Chevrolet Colorado based on customer reviews/ratings are:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“Was everything I expected”
from
$53.99
(12)
Cylindrical Bearing
“Nice clean American made bearings fit right in nice and tight for my ’04 e-150 rear diff.”
