2017 Audi S8 Cooling and Climate Controls

Essential 2017 Audi S8 Cooling and Climate Controls

Vemo – Q+ OE Quality A/C Relay (Part No.R114051274VMO)

Q+ OE Quality A/C Relay

from

$46.52
The Vemo A/C Relay is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Made in Germany OE Quality
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications Q+ The Seal of Excellence
  • ALWAYS OEM QUALITY
  • ALWAYS MADE IN GERMANY
See More

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)

Engine Coolant Temperature Sensor

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1656)

HVAC Blower Motor Resistor

from

$701.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.941-221)

Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees

from

$87.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Pierburg – Auxiliary Water Pump (Part No.G3050551801APG)

Auxiliary Water Pump

from

$163.28
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2172)

HVAC Heater Core Temperature Sensor

from

$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – AC Pressure Sensor (Part No.ACA1802)

AC Pressure Sensor

from

$49.49
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

KAI – A/C System Seal Kit (Part No.FTT010068)

A/C System Seal Kit

from

$28.99
New Standard Replacement A/C System Seal Kit, MT2622, L4 Engine

Product Features:
  • MT2622, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83063)

A/C Desiccant Bag Kit

from

$25.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76520)

Blower Motor: With Wheel

from

$508.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
  • Functionally Equivalent to OE Design
  • Magnetic size and properties compare or exceed OEM
  • Hermetically Sealed & Thermally Protected Electronics
See More

Rein – A/C O-Ring (Part No.R1150324905RIN)

A/C O-Ring

from

$1.74
A/C O-Ring

Santech – A/C Service Valve Co (Part No.R1254946899SII)

A/C Service Valve Co

from

$9.11
A/C Service Valve Co

Rein – Cap-Expansion Tank (Part No.CPE0047)

Cap-Expansion Tank

from

$16.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Rein – Radiator Mount (Part No.AVM0702)

Radiator Mount

from

$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life.
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Made by the OE manufacturer.
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)

Oil Drain Plug Gaske

from

$0.62
Oil Drain Plug Gaske

Carquest Premium – A/C New; w/ Clutch; w/ 7SB16C Compressor (Part No.T78313)

A/C New; w/ Clutch; w/ 7SB16C Compressor

from

$407.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

ACM – Blower Motor Regulat (Part No.R2041414651ACM)

Blower Motor Regulat

from

$105.18
Blower Motor Regulat

DENSO – New Compressor With Clutch (Part No.471-1260)

New Compressor With Clutch

from

$522.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest Premium – New Compressor with Clutch, Nippondenso 7SEU17C (Part No.T98392)

New Compressor with Clutch, Nippondenso 7SEU17C

from

$600.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Endurance tested the equivalent of 50k miles
  • Includes specific electrical connector to eliminate splicing
  • Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
  • For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
  • Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2268)

ABS Wheel Speed Sensor

from

$113.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Bosch – Bosch ABS Speed Sensor (Part No.N6030449405BOS)

Bosch ABS Speed Sensor

from

$40.25
The Bosch OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Febi – Water Temperature Sensor O-Ring (Part No.C606032192FEB)

Water Temperature Sensor O-Ring

from

$1.79
Water Temperature Sensor O-Ring

Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)

Heater Pipe O-Ring

from

$1.79
Heater Pipe O-Ring

2017 Audi S8 Cooling and Climate Controls

You count on your 2017 Audi S8 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 38 Cooling and Climate Controls ranging in price from $0.62 to $643.99, you’re sure to find everything you need for your 2017 Audi S8.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 20 different brands like Permatex, Carquest Premium, and Motorad. 2017 Audi S8 Cooling and Climate Controls start as low as $0.62!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 397 extensive product reviews on 2017 Audi S8 Cooling and Climate Controls.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2017 Audi S8 below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2017 Audi S8

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2017 Audi S8 running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Motorad, and even more.

Popular Carquest Premium Cooling and Climate Controls

You’ll find popular Carquest Premium brand products across Engine Cooling Parts. All are waiting to get your 2017 Audi S8 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Engine Coolant Reservoir Cap
from $11.99
(3)
Engine Coolant Reservoir Cap
Coolant Reservoir Caps

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2017 Audi S8, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2017 Audi S8 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2017 Audi S8?

Out of 38 Cooling and Climate Controls for the 2017 Audi S8, the most popular in our inventory are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees
from $107.99
This product is not rated
Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees
Thermostat and Water Outlet Assemblies
Cap-Expansion Tank
from $15.99
This product is not rated
Cap-Expansion Tank
Coolant Reservoir Caps