from

$205.99

Product Features:

KIT BRG & SEAL TOYOTA 8″ V6 & TURBO

from

$394.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
4.88 ratio
29 spline pinion

from

$53.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$129.78

Differential Bearing

from

$136.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. Side shims included.

Product Features:

Fits reverse rotation Toyota Landcruiser
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$63.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), pinion shim kit, marking compound and brush. No side shims.

Product Features:

Fits Toyota 7.5″ front with 6 cylinder engine
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$19.99

Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential

from

$7.11

Pinion Seal

from

$284.99

Yukon 1541H alloy rear axle for ’86-’95 Toyota Pick and 4Runner with length 28 1/2″ and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a five year warranty against manufacturing defects.

Product Features:

30 spline
6 lug
28.5″ long
Fits Toyota 8″ and V6 in 1989-1995 Pickup and 4Runner

from

$469.99

Product Features:

30 spline
6 lug
29.25″ long
Fits 1995-2000 Tacoma and 1996-2000 4Runner
Non ABS applications only

from

$8.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.65

Pinion Seal

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Exceptional wear protection of gears and bearings
Provides superior deposit control and protects metal surfaces from rust and corrosion
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$17.99

Product Features:

Pinion depth shims for Dana Spicer 60 and 70U

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$34.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.99

DiffRingGearBolt

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$20.29

Product Features:

CRUSH SLEEVE TOY. FRT END

from

$61.99

Differential Crush S

from

$428.32

Differential Shift A

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$203.99

DiffrlCarrBng

from

$338.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Toyota 7.5″ with 6 cylinder engine
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$234.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Toyota 8″ and 4 cylinder engine, 1985 and down or 1986 and up with aftermarket ring and pinion set
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$295.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Toyota 7.5″ with 4 cylinder engine
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

2016 Toyota 4Runner Differentials

More 2016 Toyota 4Runner Differentials

Essential 2016 Toyota 4Runner Differentials

Motive Gear – Differential Bearing Kit – Koyo (Part No.R11RV6)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 4.88 Ratio (Part No.24623)

National – Bearings (Part No.32307)

Koyo – Differential Bearing (Part No.J7060163891KOY)

Yukon Gear – Minor Install Kit For New Toyota Clamshell Design Reverse Rotation Differential (Part No.12086)

Yukon Gear – Minor Install Kit For Toyota 7.5" IFS Differential, V6 (Part No.12071)

Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

Corteco – Pinion Seal (Part No.J7010163867CFW)

Yukon Gear – 1541H Alloy Rear Axle For ’86-’95 Toyota Pick And 4Runner (Part No.21659)

Yukon Gear – Rear Axle For ’95-’00 Tacoma & ’96-’00 4Runner, Non-ABS (Part No.21739)

National – Multi Purpose Seal (Part No.710419)

NOK – Pinion Seal (Part No.J7010163834NOK)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

National – Shaft Repair Sleeve (Part No.99166)

Yukon Gear – DiffRingGearBolt (Part No.33580)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Motive Gear – Differential Crush Sleeve (Part No.3121)

Yukon Gear – Differential Crush S (Part No.33573)

AISIN – Differential Shift A (Part No.J70781333983ASC)

Driveworks – Taper Bearing Cup (Part No.S-JLM-104910)

National – Bearings (Part No.LM102910)

Yukon Gear – DiffrlCarrBng (Part No.18109)

Yukon Gear – Pinion Install Kit For Toyota 7.5" IFS Differential (V6 Only) (Part No.13087)

Yukon Gear – Pinion Install Kit For Early Toyota 8" Differential (Part No.13088)

Yukon Gear – Pinion Install Kit For Toyota 7.5" IFS Differential (Four Cylinder Only) (Part No.13086)

Popular 2016 Toyota 4Runner Differentials Categories

2016 Toyota 4Runner Differentials

Differentials Brands To Make Your 2016 Toyota 4Runner Last

Popular National Differentials

Top 2016 Toyota 4Runner Differentials from Valvoline

FAQs for 2016 Toyota 4Runner Differentials

What are the most purchased Differentials for the 2016 Toyota 4Runner?

More Popular Parts for All Makes