2016 Lincoln MKT Serpentine and V Belts
More 2016 Lincoln MKT Serpentine and V Belts
Find your specific 2016 Lincoln MKT original or aftermarket Serpentine and V Belts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2016 Lincoln MKT Serpentine and V Belts
Dayco – Poly Rib Belt Serpentine Belt; 53.94 Long, 4 Rib Count (Part No.5040539)
from
$62.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
Dayco – Stretch Serpentine Belt; 36.69 Long, 4 Rib Count, Zip Tie Required (Part No.4PK932EE)
from
$25.99
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.
Product Features:
See More
Product Features:
- Designed for two- to four-point drives that do not require automatic or manual tensioning
- Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
- Elasticity allows for long-lasting performance and proper tension
Dayco – Stretch Serpentine Belt; 35.91 Long, 4 Rib Count, Zip Tie Required (Part No.4PK912EE)
from
$20.79
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.
Product Features:
See More
Product Features:
- Designed for two- to four-point drives that do not require automatic or manual tensioning
- Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
- Elasticity allows for long-lasting performance and proper tension
Driveworks – Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count (Part No.450K6)
from
$16.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Stretch Serpentine Belt; 35.9 Long, 4 Rib Count, Zip Tie Required (Part No.E040359)
from
$28.49
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.
Product Features:
See More
Product Features:
- Designed for two- to four-point drives that do not require automatic or manual tensioning
- Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
- Elasticity allows for long-lasting performance and proper tension
Gates – Micro-V« Serpentine Drive Belt (Part No.K060448)
from
$27.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Motorcraft – SERPENTINE BELT (Part No.JK4-365)
from
$18.79
SERPENTINE BELT
Dayco – Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count (Part No.5060450)
from
$28.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
ContiTech – Multi Rib (Serpentine) Belt (Part No.W100062495CON)
from
$27.32
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Temperature-stable from -22F to 176F (30C to 80C).
- Delivers over 98% power efficiency.
- High performance construction.
- Polychloroprene rubber cover and body.
- Polyester fiber tensile members and a ribbed belt design.
Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W10001349480MTR)
from
$44.87
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
- Laminated die-cut edge design provides quiet, efficient operation
- Stands up to grease, oil, dirt and high temperatures
- Flexes easily around the smallest pulley
- Helps preserve belt strength
- Helps eliminate rough edges present on cut-cog designed belts
- Provides quiet operation
Bando – Drive Belt (Part No.W10002440745BAN)
from
$22.79
Drive Belt
Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000532657MTR)
from
$28.47
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
- Laminated die-cut edge design provides quiet, efficient operation
- Stands up to grease, oil, dirt and high temperatures
- Flexes easily around the smallest pulley
- Helps preserve belt strength
- Helps eliminate rough edges present on cut-cog designed belts
- Provides quiet operation
Bando – Multi Rib (Serpentine) Belt (Part No.W100027638BAN)
from
$13.95
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100062495MBL)
from
$27.06
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)
from
$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Popular 2016 Lincoln MKT Serpentine and V Belts Categories
2016 Lincoln MKT Serpentine and V Belts
Maybe you’re in the middle of a full rebuild of that 2016 Lincoln MKT. Maybe you just need a couple of Serpentine and V Belts. Either way, Advance Auto Parts has 16 different Serpentine and V Belts in our inventory ranging from $13.95 to $62.99. That means you can find the exact parts or products you need to keep that 2016 Lincoln MKT running smoothly.
Serpentine and V Belts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2016 Lincoln MKT. Dayco, DriveWorks, and Motorcraft are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Serpentine and V Belts for your 2016 Lincoln MKT, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Serpentine and V Belts to keep your 2016 Lincoln MKT rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Serpentine and V Belts Brands To Make Your 2016 Lincoln MKT Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2016 Lincoln MKT demands trusted brand parts and products to keep it running. Many trusted brands of Serpentine and V Belts make up Advance Auto Parts’ inventory, and all are ready to help make your MKT the best it can be. Be sure to browse some of our top Serpentine and V Belts brands and parts.
Popular ContiTech Serpentine and V Belts
We carry ContiTech parts in our stock across V-Belts categories, plus more. For a 2016 Lincoln MKT, our most popular ContiTech Serpentine and V Belts include:
Top 2016 Lincoln MKT Serpentine and V Belts from Dayco
Dayco products are another trusted brand when it comes to Serpentine and V Belts for your 2016 Lincoln MKT. Popular Dayco parts include:
from
$29.99
(251)
Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth
Drive Belt Idler Assemblies
FAQs for 2016 Lincoln MKT Serpentine and V Belts
What are the most purchased Serpentine and V Belts for the 2016 Lincoln MKT?
Out of 16 Serpentine and V Belts for the 2016 Lincoln MKT, the most popular in our inventory are:
from
$62.99
This product is not rated
Poly Rib Belt Serpentine Belt; 53.94 Long, 4 Rib Count
Serpentine Belts
