2016 Ford Police Interceptor Sedan Lower Control Arm and Ball Joints
When it comes to keeping your 2016 Ford Police Interceptor Sedan running smoothly, the lower control arm and ball joints are crucial components to pay attention to. Regular maintenance is key; make sure to inspect them for wear and tear, address any unusual noises, and keep an eye on your steering responsiveness. If you start feeling vibrations, hearing clunks while driving, or noticing uneven tire wear, it might be time to check these parts. A little diligence goes a long way, ensuring you can tackle the road ahead, whether it’s a routine drive or a high-speed chase in a pursuit!
Essential Lower Control Arm and Ball Joint Maintenance for Your 2016 Ford Police Interceptor Sedan
If you’re rolling up your sleeves to tackle some maintenance or upgrades on your 2016 Ford Police Interceptor Sedan, then taking a good look at your lower control arms and ball joints is a smart move. These components play a crucial role in your vehicle’s steering and suspension system, ensuring a smooth ride and confident handling, especially if you’re cruising through tough terrains or putting on some extra miles. At Advance Auto Parts, we understand the value of quality, which is why we offer a wide selection of lower control arms and ball joints from trusted brands that you can rely on. By choosing parts from us, you’re not just maintaining your vehicle, but also upgrading its performance and longevity with trusted solutions that keep you safe on the road. So gear up, grab the right parts, and give your Interceptor the care it deserves!
Cost of Lower Control Arm and Ball Joints for Your 2016 Ford Police Interceptor Sedan
At Advance Auto Parts, we know that when it comes to lower control arms and ball joints, you want both quality and value without breaking the bank. That’s why we offer a fantastic selection of trusted brands designed to fit your vehicle’s specific needs, with prices ranging from a wallet-friendly $93.99 all the way up to $269.99. On average, you can expect to spend around $197.99, making it easier for you to find the perfect parts that keep your ride smooth and safe, all while sticking to your budget. Whether you’re tackling a DIY project or just looking to keep your auto maintenance in check, we’ve got you covered!
Complete Your 2016 Ford Police Interceptor Sedan Lower Control Arm and Ball Joint Job with the Right Tools and Parts
When you’re diving into the maintenance or replacement of lower control arms and ball joints, it’s a good idea to keep a few related products on hand, such as new bushings, tie rod ends, and even lubricants for a smooth installation process. You’ll likely need some special tools, like a ball joint separator and a torque wrench, to ensure everything is tightened to specs and functioning correctly. Don’t forget your safety gear! Wearing gloves and safety glasses isn’t just smart—it’s essential, especially when dealing with heavy components and persistent rust. A solid plan and the right tools will make your DIY job not just easier, but safer too!
Lower Control Arm and Ball Joints for Your 2016 Ford Police Interceptor Sedan
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622917)
from
$137.99Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
- GREASEABLE SOCKETá–?Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622916)
from
$211.99Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
- GREASEABLE SOCKETá–?Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Rear Upper Forward Lateral Arm (Part No.RK623606)
from
$94.99Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Dorman – Suspension Control Arm (Part No.528-353)
from
$272.99Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.528-354)
from
$272.99Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Lower Control Arm with Ball Joint (Part No.810-503807B)
from
$203.99Product Features:
- Engineered for OE fit, form and function
- Application specific, direct fitment for trouble-free installation
- Corrosion-resistant coating on steel control arms to reduce rust and extend service life
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included on many applications for easier installation
Carquest Premium – Control Arm with Ball Joint (Part No.810-503806B)
from
$203.99Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
- Hardware included for easier installation
- Pre-installed bracket (where applicable) for a complete repair, saving time and labor.
FAQs for 2016 Ford Police Interceptor Sedan Lower Control Arm and Ball Joints
Which Lower Control Arm and Ball Joints are the top sellers for the 2016 Ford Police Interceptor Sedan?
How can I make sure that a part will be compatible with my 2016 Ford Police Interceptor Sedan?
What is the price range for 2016 Ford Police Interceptor Sedan Lower Control Arm and Ball Joints?
The range of prices of Lower Control Arm and Ball Joints for the 2016 Ford Police Interceptor Sedan goes from $94.99 up to $272.99 for the most premium parts.
