2016 Ford F-250 Super Duty Exhaust Parts
More 2016 Ford F-250 Super Duty Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2016 Ford F-250 Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2016 Ford F-250 Super Duty Exhaust Parts
aFe POWER – Brake Control Module (Part No.77-63002)
from
$730.99
Brake Control Module
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03419)
from
$23.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- Repair kit helps to secure exhaust manifold to the vehicle engine head
- Manufactured to strict engineering quality standards
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21593)
from
$163.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.953045)
from
$126.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA1065)
from
$94.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – EGR Temperature Sensor (Part No.AC20612)
from
$91.99
Product Features:
See More
- Original equipment fit, form and function
- Direct OE replacement
Walker – Tail Pipe Aluminized 60.375" (Part No.55542)
from
$80.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Extension Pipe Aluminized 37" (Part No.54496)
from
$69.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Exhaust 42127 Exhaust Pipe Connector (Part No.42127)
from
$56.99
Marketing Description for EPIC - Complete your exhaust repair with Walker® connectors. Featuring a smooth, burr-free finish for proper fitment, Walker connectors are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubing
- SMOOTH FINISH — Burr-free construction for proper fitment
- QUALITY MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust 41811 Exhaust Pipe Connector (Part No.41811)
from
$9.29
Marketing Description for EPIC - Complete your exhaust repair with Walker® connectors. Featuring a smooth, burr-free finish for proper fitment, Walker connectors are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubing
- SMOOTH FINISH — Burr-free construction for proper fitment
- QUALITY MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447209)
from
$390.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.24161)
from
$822.99
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24161 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 2005-2007 Ford F-250 Super Duty, 2005-2007 Ford F-350 Super Duty, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-943)
from
$169.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
aFe POWER – Exhaust Manifold (Part No.46-40094)
from
$675.99
Machined Ports: These manifolds have both the inlet and the outlet ports machined to match the factory ports. This allows for maximum flow, without compromising the integrity of gasket sealing. Auxiliary Ports: An Exhaust Gas Temperature (EGT) probe port is incorporated into each manifold for easy installation of gauges or testing equipment. There are three additional cast in bosses provided to allow for alternate testing points. Hassle-Free Installation: These manifolds are compatible with the stock up-pipes, which allows the manifolds to be installed without having to remove the turbocharger down-pipe or the up-pipes.
Product Features:
See More
Product Features:
- Outflows Factory Exhaust Manifolds By 5%
- Improved Performance And Throttle Response
- Compatible w/Factory Up-Pipes Which Allows For Easy Install
- Matches The Flow On Driver/Passenger Side Manifold
Dorman – Exhaust Flange Stud (Part No.H10141026135DOR)
from
$13.14
Exhaust Flange Stud
Dorman – Exhaust Manifold Har (Part No.H1012691100DOR)
from
$34.36
Exhaust Manifold Har
Walker – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52586)
from
$89.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 3 (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp Band, Butt Joint Bolt Dia Length Nut Type Hex Pipe Dia 2.75 (Part No.36531)
from
$44.99
Complete your exhaust repair with the Torca coupler band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
- PREMIUM MATERIALS – Made from a variety of materials, including low-carbon steel or stainless steel for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
MagnaFlow – Pro Series Filter-Back Performance Exhaust System (Part No.17872)
from
$665.99
The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17872 17872 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.4L, 6.7L 2008-2023 Ford with MagnaFlow’s signature sound and dyno-tested performance. 17872’s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17872 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.
Product Features:
See More
Product Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
aFe POWER – Large Bore-HD DPF Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP (Part No.49-43090-P)
from
$585.99
aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style hangers provide stability and for an easy installation. Finishing off the exhaust is a black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.
Product Features:
See More
Product Features:
- Constructed Of Mandrel Bent Stainless Steel
- Increased Flow And Performance
- High Quality Band Clamps
- OE Style Bayonet Hangers
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 72mm (Part No.03131)
from
$16.49
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Help – Exhaust Flange Hardware Kit (Part No.03117)
from
$16.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Felpro – Exhaust Pipe Flange Gasket (Part No.61417)
from
$39.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – 7 Bolt Exhaust Pipe Flange Gasket: Graphoil with Steel, Heat Resistant, Premium Materials (Part No.36495)
from
$14.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66081)
from
$48.99
Seal-4-Good Header Flange Gasket
MAHLE Original – EXHAUST MANIFOLD SET (Part No.MS19468)
from
$79.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Exhaust Manifold Gasket Set (Part No.MS 93489)
from
$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Popular 2016 Ford F-250 Super Duty Exhaust Parts Categories
2016 Ford F-250 Super Duty Exhaust Parts
You count on your 2016 Ford F-250 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 43 Exhaust Parts ranging in price from $9.29 to $1,253.99, you’re sure to find everything you need for your 2016 Ford F-250 Super Duty.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 8 different brands like Walker, Dorman, and Dynomax. 2016 Ford F-250 Super Duty Exhaust Parts start as low as $9.29!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 75 extensive product reviews on 2016 Ford F-250 Super Duty Exhaust Parts.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2016 Ford F-250 Super Duty below to get started!
Top-Rated Exhaust Parts Brands For Your 2016 Ford F-250 Super Duty
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2016 Ford F-250 Super Duty running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Dynomax, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 2016 Ford F-250 Super Duty back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 2016 Ford F-250 Super Duty, and some of our most reviewed parts include:
FAQs for 2016 Ford F-250 Super Duty Exhaust Parts
What are the most purchased Exhaust Parts for the 2016 Ford F-250 Super Duty?
Out of 43 Exhaust Parts for the 2016 Ford F-250 Super Duty, the most popular in our inventory are:
from
$101.99
This product is not rated
Direct Fit Exhaust Manifold: Without Heat Shield
Exhaust Manifold and Headers
from
$101.99
This product is not rated
Direct Fit Exhaust Manifold: Without Heat Shield
Exhaust Manifold and Headers
