2016 BMW 320i Wheels and Tires
More 2016 BMW 320i Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2016 BMW 320i, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2016 BMW 320i Wheels and Tires
Febi – Wheel Hub (Part No.K7000455655FEB)
from
$119.76
FEBI manufactures OE quality wheel hub assemblies that provide superior performance and durability.
Product Features:
See More
Product Features:
- OE Quality
- High quality steel and surface finishes
- Proper implementation of heat treatment
- Precise engineered hub surface provide maximum load capacity and durability
Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)
from
$462.99
The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Silver Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut (Part No.RDV021)
from
$19.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- Complete Valve Kit for Huf OE and Aftermarket sensors
- Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
- Flexible valve angle 0 to 36 degrees.
Continental – TPMS Service Kit (Part No.SE54830)
from
$11.99
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
See More
SKF – Wheel Bearing Circli (Part No.K8027242143SKF)
from
$5.61
Wheel Bearing Circli
Huf North America – Silver Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut (Part No.RDV022)
from
$9.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- Complete Valve Kit for Huf OE and Aftermarket sensors
- Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
- Flexible valve angle 0 to 36 degrees.
Huf North America – Aluminum Valve 51mm (Part No.RDV024)
from
$9.49
Product Features:
See More
- Silver
- Adjustable 0-36 degrees
- High quality coating to prevent corrosion
- Only one tool needed (35 in-lbs)
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Carquest Premium – Hub Assembly with Wheel Bearing 91-556349 (Part No.91-556349)
from
$228.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
SKF – Wheel Hub Assembly (Part No.K7001943783SKF)
from
$419.39
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.
Product Features:
See More
Product Features:
- OE sensors assure correct ABS functions
- Premium seals, both inboard and outboard, protect the bearing
- Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
- The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
VDO – Valve Stem Cap (Part No.O82241576281VDO)
from
$7.98
Valve Stem Cap
McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226)
from
$279.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring, 25 Piece (Part No.1096)
from
$12.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Ball-seat valve stem assembly with internal shear ring
- 43mm/0.453″ rim hole compatibility
- 200 PSI maximum cold inflation pressure
Huf North America – TPMS Valve Assembly (Part No.O8208406087HUF)
from
$7.94
TPMS Valve Assembly
Dill Air Control – TPMS Complete Valve Stem Assembly for OE and REDI-Sensor (Part No.VS-70)
from
$14.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Complete TPMS valve stem assembly for OE and REDI-Sensor
- 0.453″ rim hole compatiblity
- 200 PSI maximum cold inflation pressure
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each) (Part No.610-367)
from
$3.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
McGard – Black Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.
McGard – Black Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
Dorman – Wheel Bolt: M14-1.25 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack (Part No.610-532.1)
from
$5.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27326)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)
from
$16.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27178)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Popular 2016 BMW 320i Wheels and Tires Categories
2016 BMW 320i Wheels and Tires
You count on your 2016 BMW 320i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 43 Wheels and Tires ranging in price from $3.49 to $7,321.99, you’re sure to find everything you need for your 2016 BMW 320i.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 14 different brands like Autel, Schrader, and Dorman. 2016 BMW 320i Wheels and Tires start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 79 extensive product reviews on 2016 BMW 320i Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. with 1.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2016 BMW 320i below to get started!
Top-Rated Wheels and Tires Brands For Your 2016 BMW 320i
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2016 BMW 320i running right for years to come. In our inventory you’ll find brands like Autel, Schrader, Dorman, and even more.
Popular Dill Air Control Wheels and Tires
You’ll find popular Dill Air Control brand products across TPMS Sensor Kits. All are waiting to get your 2016 BMW 320i back on the road. Some of the top-rated Dill Air Control products in these categories are:
from
$5.99
(4)
TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece
Tire Pressure Sensor Service Kits
Top-Rated Schrader Wheels and Tires
If Schrader are what you’re looking for, our inventory holds plenty. We stock Schrader brand Wheels and Tires for your 2016 BMW 320i, and some of our most reviewed Schrader parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 2016 BMW 320i Wheels and Tires
What are the most purchased Wheels and Tires for the 2016 BMW 320i?
Out of 43 Wheels and Tires for the 2016 BMW 320i, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Tire Pressure Sensors
What are the top-rated 2016 BMW 320i Wheels and Tires?
Top-rated Wheels and Tires for your 2016 BMW 320i based on customer reviews/ratings are:
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
