1980 BMW 320i Wheels and Tires
More 1980 BMW 320i Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1980 BMW 320i, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1980 BMW 320i Wheels and Tires
Dorman – Wheel Stud (Part No.O8060833270DOR)
from
$37.41
Wheel Stud
McGard – Chrome Cone Seat Style Lug Bolt (M12 x 1.5 Thread Size) – Box of 50 Lug Bolts (Part No.69779)
from
$759.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150.
McGard – Chrome Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726)
from
$759.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.
Dorman – Wheel Bolt: M14-1.25 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack (Part No.610-532.1)
from
$5.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27326)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27226)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
SKF – Transmission Case Bearing (Part No.J202124297SKF)
from
$38.56
Transmission Case Bearing
SKF – Wheel Bearing Kit (Part No.K802019587SKF)
from
$120.75
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Wheel bearing kits include required components for complete bearing replacement
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
- Precise assembly tolerances
Driveworks – Taper Bearing Set (Part No.S-A-1)
from
$8.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 433MHz (Part No.UVS4040)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 433 MHz TPMS Universal with metal valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)
from
$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 433MHz (Part No.UVS4041)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 433 MHz TPMS Universal with rubber valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
Elring – Wheel Seal (Part No.K8010459150ELR)
from
$8.33
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.
Product Features:
See More
Product Features:
- Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
- Various designs specifically adapted to the area of application ensure excellent functionality and performance
- High-performance FPM guarantees optimum leak tightness
National – Multi Purpose Seal (Part No.224235)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-15)
from
$10.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAG – Wheel Bearing (Part No.K8000323128FAG)
from
$14.05
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
FAG – Wheel Bearing Kit (Part No.K802026984FAG)
from
$30.14
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Wheel bearing kits include required components for complete bearing replacement
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
- Specific roller and raceway profiles
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Elring – Wheel Seal (Part No.K8010459148ELR)
from
$7.99
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.
Product Features:
See More
Product Features:
- Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
- Various designs specifically adapted to the area of application ensure excellent functionality and performance
- High-performance FPM guarantees optimum leak tightness
Popular 1980 BMW 320i Wheels and Tires Categories
1980 BMW 320i Wheels and Tires
You count on your 1980 BMW 320i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 17 Wheels and Tires ranging in price from $3.99 to $361.99, you’re sure to find everything you need for your 1980 BMW 320i.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 8 different brands like Schrader, Dorman, and Driveworks. 1980 BMW 320i Wheels and Tires start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 71 extensive product reviews on 1980 BMW 320i Wheels and Tires.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1980 BMW 320i below to get started!
Top-Rated Wheels and Tires Brands For Your 1980 BMW 320i
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 BMW 320i running right for years to come. In our inventory you’ll find brands like Schrader, Dorman, Driveworks, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware. All are waiting to get your 1980 BMW 320i back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(1)
Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1980 BMW 320i, and some of our most reviewed parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 1980 BMW 320i Wheels and Tires
What are the most purchased Wheels and Tires for the 1980 BMW 320i?
Out of 17 Wheels and Tires for the 1980 BMW 320i, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$3.99
This product is not rated
Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each)
Wheel Bolts
