from

$111.35

Blower Motor Regulat

from

$36.99

This engine coolant pipe is designed to match the fit and function of the original pipe on specified vehicles. It is engineered to help ensure leak-free coolant transfer when an original pipe has failed from heat or corrosion.

Product Features:

Direct replacement – this engine coolant pipe is designed to match the fit and function of the original pipe on specified vehicles
Ideal solution – engineered to help ensure leak-free coolant transfer when an original pipe has failed from heat or corrosion
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$17.84

ACM is a supplier of Original Equipment quality climate control products. Feed & Return Lines

from

$29.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$31.99

New Standard Replacement A/C Expansion Valve, L4 Engine

Product Features:

L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

New Standard Replacement A/C Receiver Drier, L4 Engine

Product Features:

L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$75.99

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$97.75

A/C Servo

from

$47.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$22.43

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$109.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$157.99

New Platinum Pro Radiator, 2.0 Liter L4 Engine, With Inlet And Outlet On Opposite Tanks

Product Features:

2.0 Liter L4 Engine, With Inlet And Outlet On Opposite Tanks, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$49.36

A/C Servo

from

$5.21

The Mahle Engine Coolant Thermostat O-Ring is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$10.35

Water Pump Coupling

from

$300.99

The gasket on certain Audi and VW OEM engine water pump housings swells when it comes in contact with oil, causing the plastic housing to crack. This Dorman OE FIX housing has been upgraded to aluminum to prevent cracking. In addition, the gasket material has been upgraded to reduce swelling when it comes in contact with oil for a longer service life. This housing is designed to match the fit and function of the original housing on specified applications, and is engineered for reliable performance and durability..

Product Features:

Improved design – this engine water pump housing has upgraded gasket material to reduce swelling when it comes in contact with oil for a longer service life.
Direct replacement – this engine water pump housing is designed to match the fit and function of the original housing on specific Audi and VW vehicles
Restores functionality – maintains the proper engine temperature, protecting the engine from damage caused by overheating
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$107.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$3.90

C Clip Retainer

from

$274.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$125.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$11.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$89.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$9.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features: