2015 GMC Canyon Exhaust System Kits

3-1/2″ Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ black stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon V6-3.6L). Made of 3″ mandrel-bent, stainless steel tubing for maximum flow means the smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. This exhaust system is finished off with a Hi-Tuck tip to give you extra ground clearance during extreme angle climbs or descents protecting the exhaust over rough terrain.

Product Features:

• +10 ft. x lbs. TQ & +9 HP
• 3 in. 409 Mandrel Bent Stainless Steel Tubing
• Hi-Tuck Tip To Give Extra Ground Clearance
• Stainless Steel Muffler To Absorb High Pitch Tones

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation
• Hardware Included

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19019 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19019 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19019 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• Aggressive Sound
• OE Style Hangers
• Hassle Free Installation
• Polished Stainless Tip Included

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• OE Style Flange
• No Bungs
• Hassle Free Installation

409 Stainless Steel:Constructed out of 3″ mandrel-bent, 409 stainless steel tubing, this system is less restrictive than stock – allowing for maximum flow and low turbulence, improving power and throttle response.OE Fit:OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.Hi-Tuck Intercooled Tip:This exhaust system is finished off with a 4″ hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents, protecting the exhaust over rough terrain. It features a high temperature black powder-coated finish and patent pending intercooled design, that reduces exhaust gas temperatures by 40%.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Hi-tuck Design Provides Increased Ground Clearance

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 409 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

Product Features:

• Improved Flow And Durability
• Deep Aggressive Tone Muffler
• MIG Welded
• Hassle Free Installation

3-1/2″ Polished Middle-Side Exit Tips:Finishing off the exhaust are dual 3-1/2″ polished stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenge

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

aFe POWER Large Bore-HD Hi Tuck exhaust system is designed to provide extra ground clearance during extreme angle climbs or descents. Constructed from mandrel-bent stainless steel tubing, this exhaust system offers performance across the power band and delivers a deep, aggressive exhaust tone. This system utilizes a less-restricting, high-flow muffler to improve performance. 100% hand MIG-welded by certified craftsmen for proven quality and durability.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Mandrel-Bent Tubing for Smooth Transitions and Increased Power
• Stainless Clamps for Improved Sealing Surface

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon V6-3.6L). Made of 3″ mandrel-bent, stainless s teel tubing for maximum flow means the smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. This exhaust system is finished off with a Hi-Tuck tip to give you extra ground clearance during extreme angle climbs or descents protecting the exhaust over rough terrain.

Product Features:

• +10 ft. x lbs. TQ & +9 HP
• 3 in. 409 Mandrel Bent Stainless Steel Tubing
• Hi-Tuck Tip To Give Extra Ground Clearance
• Stainless Steel Muffler To Absorb High Pitch Tones

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
• Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
• Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience