2015 Ford Police Interceptor Utility Wheel Bearings
More 2015 Ford Police Interceptor Utility Wheel Bearings
Find your specific 2015 Ford Police Interceptor Utility original or aftermarket Wheel Bearings below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2015 Ford Police Interceptor Utility Wheel Bearings
Dorman – Wheel Bearing and Hub Assembly: Rear/Front, 5 Studs (Part No.951-104)
from
$231.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
Motorcraft – Wheel Hub Assembly for Exceptional Performance and Durability (Part No.K7001412935MTR)
from
$285.06
Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.
Product Features:
See More
Product Features:
- Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
- Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
- Special bearing seals to help keep out contaminants, the number one cause of bearing failure
- Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
- Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
- Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
- Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
- Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
- Integral bearing races specifically designed to each application, no one-size-fits-all solution
- Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
- Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
- Original equipment specifications minimize any possibility of the hub cracking
- Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
- Tapered roller bearings for high load rates when specified
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512460)
from
$234.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT512460)
from
$169.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
Carquest Premium – Hub Assembly with Wheel Bearing 91-480977: With Mounting Hardware (Part No.91-480977)
from
$204.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Popular 2015 Ford Police Interceptor Utility Wheel Bearings Categories
2015 Ford Police Interceptor Utility Wheel Bearings
Maybe you’re in the middle of a full rebuild of that 2015 Ford Police Interceptor Utility. Maybe you just need a couple of Wheel Bearings. Either way, Advance Auto Parts has 5 different Wheel Bearings in our inventory ranging from $169.99 to $285.06. That means you can find the exact parts or products you need to keep that 2015 Ford Police Interceptor Utility running smoothly.
Wheel Bearings are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2015 Ford Police Interceptor Utility. Driveworks, Carquest Premium, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Wheel Bearings for your 2015 Ford Police Interceptor Utility, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Wheel Bearings to keep your 2015 Ford Police Interceptor Utility rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Wheel Bearings Brands To Make Your 2015 Ford Police Interceptor Utility Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2015 Ford Police Interceptor Utility demands trusted brand parts and products to keep it running. Many trusted brands of Wheel Bearings make up Advance Auto Parts’ inventory, and all are ready to help make your Police Interceptor Utility the best it can be. Be sure to browse some of our top Wheel Bearings brands and parts.
Popular MOOG Hub Assemblies Wheel Bearings
We carry MOOG Hub Assemblies parts in our stock across Front Wheel Bearings categories, plus more. For a 2015 Ford Police Interceptor Utility, our most popular MOOG Hub Assemblies Wheel Bearings include:
Top 2015 Ford Police Interceptor Utility Wheel Bearings from Driveworks
Driveworks products are another trusted brand when it comes to Wheel Bearings for your 2015 Ford Police Interceptor Utility. Popular Driveworks parts include:
FAQs for 2015 Ford Police Interceptor Utility Wheel Bearings
What are the most purchased Wheel Bearings for the 2015 Ford Police Interceptor Utility?
Out of 5 Wheel Bearings for the 2015 Ford Police Interceptor Utility, the most popular in our inventory are:
from
$204.99
This product is not rated
Hub Assembly with Wheel Bearing 91-480977: With Mounting Hardware
Rear Wheel Bearings
from
$285.06
This product is not rated
Wheel Hub Assembly for Exceptional Performance and Durability
Front Wheel Bearings
from
$231.99
This product is not rated
Wheel Bearing and Hub Assembly: Rear/Front, 5 Studs
Front Wheel Bearings
