2014 Toyota Land Cruiser Oil and Lubricants

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Unsurpassed thermal breakdown protection: GTX Engine Oil, 10W-40 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.
• Prevents harmful sludge build-up: GTX Engine Oil, 10W-40 is specially engineered to prevent the build-up of harmful sludge, which can rob your engine of its power and ultimately its life.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Advanced Friction Reduction: Transforms its structure under pressure to keep metal parts apart, reducing friction and unlocking maximum engine performance, which can help prevent up to 10% performance loss due to friction.
• Engineered for Modern Engines: Specially designed to withstand the stress of today’s smaller, more powerful engines, ensuring optimal performance and protection under increased pressure and demands.
• Full Synthetic Composition: As a full synthetic motor oil with a 5W-30 SAE oil weight, Castrol EDGE offers superior protection and performance, making it the natural choice for drivers seeking the best for their vehicles.

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Protection: Suitable for domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.

Castrol EDGE Euro Car 5W-30 A3/B4 Full Synthetic Motor Oil transforms under pressure, increasing film strength to prevent oil breakdown and reduce friction, unlocking maximum performance. Optimized to deliver 40% better performance than required by ACEA standards, it is recommended by world-leading auto manufacturers. This full-synthetic oil provides engine protection for the entire drain interval, even under the extreme pressure of high-output engines. Formulated for the latest technology, high-output engines that operate at extreme temperatures, it meets API CF/SL, ACEA A3/B4, BMW LL 01, Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, and VW 502 00/505 00 specifications, covering European OEM gasoline requirements for BMW, Mercedes-Benz, Porsche, and VW/Audi.

Product Features:

• Optimized to deliver 40% better performance than required by ACEA standards
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets API CF/SL, ACEA A3/B4, BMW LL 01, Meets Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, VW 502 00/505 00
• Advanced Formulation: Specifically formulated for the latest technology, high-output engines that operate at extreme temperatures, ensuring reliable performance.

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented phosphorus replacement technology to help extend the life of your emission system
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection (as measured in latest sequence iva engine test)
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Maximum Performance: Castrol EDGE High Mileage with Fluid TITANIUM Technology is designed to provide maximum performance for high mileage cars, even in extreme temperatures.
• Protects Catalytic Converter: Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus, protecting the catalytic converter and preserving the life of your emission system.

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-20 and is a fully licensed GM dexos®1 Gen 2 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 2, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of pre-mature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for a variety of engine types, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for many vehicles.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
• Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Synthetic Blend Composition: Castrol GTX High Mileage Motor Oil is a synthetic blend, offering the benefits of both conventional and synthetic oils for superior engine protection.
• Extended Engine Life: Designed to protect against sludge, wear, and burn-off, this motor oil helps extend the life of high mileage engines.
• Optimal Viscosity: With an SAE oil weight of 10W-30, this motor oil provides excellent performance in a wide range of temperatures, ensuring reliable engine protection.

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs
• Engine Life Extension: Castrol« GTX« has been helping to extend engine life for over 50 years, making it one of the most trusted motor oil brands today.
• Conventional Oil Composition: As a premium conventional motor oil, Castrol« GTX« meets the needs of both consumers and vehicle manufacturers.
• Superior Performance: Exceeds tough industry standards by protecting against new oil splatter formation, ensuring optimal engine performance.
• Versatile SAE Weight: With an SAE oil weight of 10W-40, Castrol« GTX« is suitable for a wide range of vehicles, providing reliable protection and performance.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs
• Engine Longevity: Castrol GTX High Mileage motor oil is specifically designed to extend the life of high mileage engines by protecting against sludge, wear, and burn-off.
• Emission System Protection: Engineered to safeguard your emission system, this motor oil helps prevent catalytic converter failure, a common cause of ‘check engine’ lights in high mileage vehicles.
• Synthetic Blend Composition: This 10W-30 synthetic blend motor oil offers superior performance and protection compared to conventional oils, making it ideal for high mileage engines.
• Trusted Brand: As a leading consumer high-mileage brand, Castrol GTX High Mileage provides reliable and effective engine protection, ensuring your vehicle runs smoothly for longer.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage with MaxLife Technology is specifically designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive rep

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
• Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
• Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

Pennzoil Ultra PlatinumTM Full Synthetic motor oil is made from natural gas, not crude. It is one of the best full synthetic motor oils in our portfolio. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control. Our full synthetic motor oils are uniquely engineered from our revolutionary PurePlus Technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the high- quality base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Ultra Platinum far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6), and is suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.

Product Features:

• Full synthetic 0w-20 engine oil made from natural gas, not crude, using pennzoil’s patented gas-to-liquid pureplus technology
• No other leading engine oil provides better wear protection for your engine (based on sequence iva wear test using sae 5w-30)
• Pennzoil 0w-20 is a carbon neutral engine oil, achieved through verified nature based carbon credits that offset the co2 lifecycle emissions
• Helps protect engines from loss of power and provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Keeps pistons dramatically cleaner than required by the toughest industry standards (based on ilsac gf-6 and sequence iiih piston deposit test using sae 5w-30)
• Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (based on sequence vh sludge test using sae 5w-20)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Pennzoil is the first engine oil made from natural gas, not crude- pureplus technology converts pure natural gas into high-quality, full-synthetic base oil that’s crystal clear and contains fewer impurities than other traditional and synthetic engine oils
• Suitable for all car, suv, light van, truck gasoline and turbocharged engines; under all driving conditions.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
• Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust  additive system to provide reliable engine protection across a broad range of operating  conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine  designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent  low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and  shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the  requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
• Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

CASTROL EDGE High Mileage 0W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and ACEA A1/B1 C5 specifications. It also reduces the level of phosphorus to help prevent catalytic converter and emission system damage. Additionally, it reduces leaks, oil burn-off, and deposits. This full synthetic motor oil is the natural choice for consumers who want to extend maximum engine performance.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c962-a1 and wss-m2c947-b1, meets engine test requirements of chrysler ms 6395
• Reduces the level of phosphorus to help prevent catalytic convertor failure,
• Reduces leaks, oil burn-off and deposits
• Exceeds api sn plus, ilsac gf-5, acea a1/b1 c5, gm dexos1 gen2, ford wss-m2c947-b1, chrysler ms-6395

Pennzoil Platinum High Mileage SAE 0W-20 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, and provides unsurpassed wear protection, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 0W-20 is engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.

Product Features:

• Designed for for vehicles with over 75,000 miles
• Pennzoil platinum high mileage 0w-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on sequence iiih results)
• No other leading high mileage engine oil provides better protection from friction (based on sequence iva wear test using sae 5w-30)
• Formulated to deliver less oil burn off than high mileage engine oils made from crude oil
• Helps protect engines from loss of horsepower
• Provides faster low-temperature oil flow and protects in extreme heat

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, offering unparalleled sludge protection, wear protection, and maximum engine performance. It is 3X stronger against viscosity breakdown than the leading full synthetic, based on the Kurt Orbahn test in 5W-30 grade, and delivers 10X better high-temperature performance as measured in the Seq IIIH engine test versus the API SP limit. Additionally, it provides 6X better wear protection, as measured in the Seq IVA test against the latest test limit. This oil meets a wide range of specifications, including API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, ACEA C5, GM dexos1 Gen 2, Ford WSS-M2C962-A1, and WSS-M2C947-B1, and meets the engine test requirements of Chrysler MS 6395. Available in various grades, including 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, and 10W-60, Castrol EDGE is the natural choice for drivers seeking the best in engine performance.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, ACEA C5, GM dexos1 Gen 2, Meets Ford WSS-M2C962-A1 and WSS-M2C947-B1, Meets engine test requirements of Chrysler MS 6395
• Available in following grades: 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, and 10W-60
• Plus a complete range of European specifications
• Try Castrol EDGE Full Synthetic motor oil today
• Unmatched Sludge and Wear Protection: Castrol EDGE 0W-20 Full Synthetic Motor Oil with Fluid TITANIUM Technology offers unparalleled sludge protection, ensuring your engine stays clean and runs smoothly.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, making it the perfect choice for high mileage vehicles.

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy(1) and extend engine life for vehicles of all ages. Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Same oil. Less waste. Mobil 1 12 quart convenience pack (bag in box) uses 87% less plastic and is manufactured in a zero waste to landfill facility. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity. (2)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.(1)
• Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 125219

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
• Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils to provide superior protection against sludge, wear, and burn-off, extending the life of your high mileage engine.
• High Mileage Engine Care: Designed for vehicles with high mileage, offering enhanced protection to keep your engine running smoothly and efficiently.
• Optimal Viscosity: With an SAE oil weight of 5W-20, this motor oil ensures optimal performance and protection in a wide range of temperatures and driving conditions.

Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
• Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.