from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$591.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Toyota 8″ clamshell front
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.

from

$245.99

Yukon yoke for Toyota 8″ IFS clamshell design, ’07 & up FJ, 05 & up Tacoma, T100 Tundra. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Toyota 8″ clamshell front
29 spline
66mm x 66mm bolt pattern

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$89.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$76.52

Differential Bearing

from

$13.49

Product Features:

KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT

from

$99.99

Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.

Product Features:

Bearing race driver
Fits 30025 race
All steel construction

from

$8.99

Product Features:

Side adjuster lock bolt
Fits Toyota 8″ 4 or 6 cylinder engine

from

$11.78

Pinion Seal

from

$919.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:

Fits Toyota V6 rear
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$72.99

V6 Toyota solid crush sleeve replacement spacer kit, preload.

Product Features:

Crush sleeve eliminator kit for Toyota V6

from

$6.99

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
5 needed

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$519.99

AxleDiffrlBrngKit

from

$615.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Toyota 8″ clamshell front
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.

from

$867.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install..

Product Features:

Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box.
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$866.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install..

Product Features:

Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box.
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$83.99

Toyota V6, T100 pinion seal w/factory elec. locker & factory yoke (OE replacement ONLY).Yukon Mighty seal.

Product Features:

Pinion seal
Fits toyota Tacoma and T100 with factory locker and Toyota V6

from

$46.99

Differential Pinion

from

$18.99

Toyota 29spl V6 and clamshell front, outer oil slinger.

Product Features:

Outer slinger
Fits Toyota 8″ clamshell front

from

$15.99

Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.

Product Features:

Pinion nut
Fits Toyota Landcruiser with 10 spline pinion

from

$5.99

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.

Product Features:

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
20mm x 1.5 thread
30mm socket

from

$289.99

Differential Pinion

from

$353.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Toyota 8″ clamshell front
Reverse rotation only
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$997.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
3.73 ratio

from

$393.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Models w/ factory 3.07 & 4.88’s have a different offset and will need a new dropout when changing ratio.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
4.56 ratio

from

$526.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

2014 Toyota FJ Cruiser Differentials

More 2014 Toyota FJ Cruiser Differentials

Essential 2014 Toyota FJ Cruiser Differentials

Yukon Gear – Outer Oil Slinger (Part No.33025)

USA Standard Gear – Master Overhaul Kit for New Toyota Clamshell Design Front Reverse Rotation Differential (Part No.37115)

Yukon Gear – Yoke For Toyota 8" IFS Clamshell Design, ’07 & Up FJ, 05 & Up Tacoma, T100 Tundra (Part No.41176)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

National – Bearings (Part No.30025)

SKF – Differential Bearing (Part No.J7060163890SKF)

Motive Gear – Differential Pinion Shim Kit (Part No.1109)

Yukon Gear – Bearing Race Driver (Part No.56004)

Yukon Gear – T8 & V6 Bolt For Adjuster Lock (Part No.33366)

NOK – Pinion Seal (Part No.J7010163834NOK)

Yukon Gear – Grizzly Locker For Toyota V6 (Part No.28020)

Yukon Gear – Crush Sleeve Eliminator Kit For Toyota V6 (Part No.55053)

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – AxleDiffrlBrngKit (Part No.11129)

Yukon Gear – Master Overhaul Kit For New Toyota Clamshell Design Front Reverse Rotation Differential (Part No.14130)

Dorman – Pre-Pressed Rear Axle (Part No.926-137)

Dorman – Pre-Pressed Rear Axle (Part No.926-138)

Yukon Gear – Toyota V6, T100 Pinion Seal With Factory Elec – Locker & Factory Yoke (Part No.30336)

Yukon Gear – Differential Pinion (Part No.30359)

Yukon Gear – Oil Slinger For Toyota 29 Spline Rear Pinion & Clamshell Front (Part No.33026)

Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)

Yukon Gear – Pinion Nut (Part No.33156)

Yukon Gear – Differential Pinion (Part No.13111)

Yukon Gear – Pinion Install Kit For Toyota Clamshell Design Front Reverse Rotation Differential (Part No.13102)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 3.73 Ratio (Part No.24588)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 4.56 Ratio (Part No.24592)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8.2" 12 Bolt Rear In 4.56 Ratio (Part No.24636)

Popular 2014 Toyota FJ Cruiser Differentials Categories

2014 Toyota FJ Cruiser Differentials

Differentials Brands To Make Your 2014 Toyota FJ Cruiser Last

Popular Idemitsu Differentials

FAQs for 2014 Toyota FJ Cruiser Differentials

What are the most purchased Differentials for the 2014 Toyota FJ Cruiser?

What are the top-rated 2014 Toyota FJ Cruiser Differentials?

More Popular Parts for All Makes