from

$8.40

Axle Seal

from

$131.02

Differential Bearing

from

$36.99

Product Features:

Side adjuster
Fits Toyota V6 and Landcruiser reverse rotation front

from

$15.99

Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.

Product Features:

Pinion nut
Fits Toyota Landcruiser with 10 spline pinion

from

$19.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$534.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses high quality bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Toyota 8″ clamshell front
Reverse rotation only
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$15.99

Ring Gear bolt for Toyota T100, Tacoma & 8″ IFS front. 12mm x 1.0.

Product Features:

Ring gear bolt for Toyota T100 and Tacoma rear without factory locking differential and Toyota Clamshell front
12mm x 1.0

from

$493.99

AxleShaft

from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$13.99

Crush Sleeve for Toyota V6, Landcruiser reverse front & Tacoma/T100 with factory locker, 1.820″ long.

Product Features:

Crush sleeve for Toyota V6, Landcruiser reverse rotation front and Tacoma/T100 with factory locker
1.820″ tall

from

$109.99

Product Features:

Fits Toyota V6 rear
Conversion yoke for 29 spline gears
29 spline pinion

from

$289.99

Differential Pinion

from

$188.99

Bearing race driver for rear Toyota V6, Landcruiser reverse rotation, and Tacoma with locker. (TOY35028). No return.

Product Features:

Bearing race driver
Fits 35028 race
All steel construction

from

$99.99

Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.

Product Features:

Bearing race driver
Fits 30025 race
All steel construction

from

$83.99

Toyota V6, T100 pinion seal w/factory elec. locker & factory yoke (OE replacement ONLY).Yukon Mighty seal.

Product Features:

Pinion seal
Fits toyota Tacoma and T100 with factory locker and Toyota V6

from

$46.99

Differential Pinion

from

$18.99

Toyota 29spl V6 and clamshell front, outer oil slinger.

Product Features:

Outer slinger
Fits Toyota 8″ clamshell front

from

$17.99

Product Features:

Pinion depth shims for Dana Spicer 60 and 70U

from

$24.99

Preload shim kit for Toyota Landcruiser. Also compatible with Toyota 8″ 4 cylinder & V6 with a solid spacer.

Product Features:

Preload shim kit
Fits 9.5″ Toyota Landcruiser

from

$13.79

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

from

$14.99

VAL EP ATF 6/1 QT

from

$919.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:

Fits Toyota V6 rear
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$918.99

8″ IFS clamshell carrier, 3.91 and up, 07 & up FJ, 05 & up TAC/T100/TNDRA.

Product Features:

Standard open carrier case
Does not include spider gears
Fits Toyota 8″ clamshell front
3.91 and up ratios only

from

$997.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
3.73 ratio

from

$379.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

from

$494.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket. This kit fits applications with a 29 spline pinion.

Product Features:

Fits Toyota V6
29 spline only
Uses Koyo bearings and races
Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and gasket.

from

$612.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Toyota Tacoma and T100 rear with factory locking differential
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.

from

$66.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. No side shims. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

2011 Toyota FJ Cruiser Differentials

More 2011 Toyota FJ Cruiser Differentials

Essential 2011 Toyota FJ Cruiser Differentials

Corteco – Axle Seal (Part No.K4021473844CFW)

Koyo – Differential Bearing (Part No.J7060163891KOY)

Yukon Gear – V6 & L/C Reverse Drop Out Side Adjusters (Part No.33365)

Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Yukon Gear – Bearing Install Kit For New Toyota Clamshell Design Front Reverse Rotation Differential (Part No.11108)

Yukon Gear – Ring Gear Bolt For Toyota T100, Tacoma & 8" IFS Front (Part No.33059)

Yukon Gear – AxleShaft (Part No.21899)

Yukon Gear – Outer Oil Slinger (Part No.33025)

Yukon Gear – Crush Sleeve (Part No.33118)

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)

Yukon Gear – Differential Pinion (Part No.13111)

Yukon Gear – Bearing Race Driver (Part No.56008)

Yukon Gear – Bearing Race Driver (Part No.56004)

Yukon Gear – Toyota V6, T100 Pinion Seal With Factory Elec – Locker & Factory Yoke (Part No.30336)

Yukon Gear – Differential Pinion (Part No.30359)

Yukon Gear – Oil Slinger For Toyota 29 Spline Rear Pinion & Clamshell Front (Part No.33026)

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Yukon Gear – Solid Preload Kit For Toyota Landcruiser (Part No.55065)

Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)

Valvoline – VAL EP ATF 6/1 QT (Part No.899179)

Yukon Gear – Grizzly Locker For Toyota V6 (Part No.28020)

Yukon Gear – 8" IFS Clamshell Carrier, 3.91 And Up, 07 & Up FJ, 05 & Up Tac/T100/Tndra (Part No.20135)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 3.73 Ratio (Part No.24588)

USA Standard Gear – Ring & Pinion Gear Set For Toyota V6 In A 4.11 Ratio (Part No.36320)

USA Standard Gear – Master Overhaul Kit For The Toyota V6, ’03 & Up (Part No.37088)

USA Standard Gear – Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker (Part No.37112)

Yukon Gear – Minor Install Kit For Toyota V6 And T8 Reverse Differential (Part No.12076)

Popular 2011 Toyota FJ Cruiser Differentials Categories

2011 Toyota FJ Cruiser Differentials

Differentials Brands To Make Your 2011 Toyota FJ Cruiser Last

Popular Idemitsu Differentials

FAQs for 2011 Toyota FJ Cruiser Differentials

What are the most purchased Differentials for the 2011 Toyota FJ Cruiser?

What are the top-rated 2011 Toyota FJ Cruiser Differentials?

More Popular Parts for All Makes