2014 Ford Mustang Performance and Racing Products
More 2014 Ford Mustang Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2014 Ford Mustang, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2014 Ford Mustang Performance and Racing Products
Dynomax – 53702 Exhaust Pipe (Part No.53702)
from
$152.99
Made from quality materials for durability, DynoMax® direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax® pipe
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowtech – Standard Header X-Pipe (Part No.12114YFLT)
from
$227.99
Standard Header X-Pipe
aFe POWER – Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-70050R)
from
$442.99
Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 8″ tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
Product Features:
See More
Product Features:
- +19 lbs. x ft. TQ & +15 HP
- Outflows Factory Intake by 28%
- Measured Flow: 295 CFM @ 7 IN H2O
- Durable One-Piece XLPE Housing Captures Air Directly from the Front of the Vehicle
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 13 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11312)
from
$357.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 100% cfm Flow Gain
- Improved Throttle Response
SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)
from
$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)
Energy Suspension – Track Bar Bushing Set (Part No.4.7129R)
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15638)
from
$863.99
The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.16605)
from
$899.99
The MagnaFlow 2005-2009 Ford Mustang Competition Series Cat-Back Performance Exhaust System 16605 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.0L 2005-2009 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16605 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16605’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Product Features:
See More
Product Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
Richmond Gear – MiniSpool (Part No.78-8831-1)
from
$151.99
MiniSpool
Motive Gear – Differential Mini Spool (Part No.MS88-28)
Motive Gear – Performance Differential Ring and Pinion (Part No.F890650)
Motive Gear – Performance Differential Ring and Pinion (Part No.F888430)
Richmond Gear – RngPnn (Part No.F9471)
from
$185.99
RngPnn
Hays – Flywheel: Late Ford 28Lb Steel (Part No.12-540)
from
$412.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Hays – Flywheels (Part No.12-071)
from
$163.99
Flywheels
Hays – Flexplt: Bb Ford 70-97 (164T) (Part No.12-055)
from
$185.99
Flexplt: Bb Ford 70-97 (164T)
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.53764)
from
$174.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Energy Suspension – M/TShftBshngKt (Part No.4.1134G)
from
$23.99
M/TShftBshngKt
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Popular 2014 Ford Mustang Performance and Racing Products Categories
2014 Ford Mustang Performance and Racing Products
You count on your 2014 Ford Mustang to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 31 Performance and Racing Products ranging in price from $17.99 to $713.99, you’re sure to find everything you need for your 2014 Ford Mustang.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 13 different brands like K&N, Flowmaster Inc., and SCT Performance. 2014 Ford Mustang Performance and Racing Products start as low as $17.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 108 extensive product reviews on 2014 Ford Mustang Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound with 5.0 stars and Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2014 Ford Mustang below to get started!
Top-Rated Performance and Racing Products Brands For Your 2014 Ford Mustang
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Ford Mustang running right for years to come. In our inventory you’ll find brands like K&N, Flowmaster Inc., SCT Performance, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Intake Kits and Performance Oil Filters. All are waiting to get your 2014 Ford Mustang back on the road. Some of the top-rated K&N products in these categories are:
from
$399.99
(1)
Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
from
$17.99
(99)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
FAQs for 2014 Ford Mustang Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2014 Ford Mustang?
Out of 31 Performance and Racing Products for the 2014 Ford Mustang, the most popular in our inventory are:
from
$99.99
(2)
40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$456.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
Computer Chip Programmers
from
$456.99
This product is not rated
Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges
Computer Chip Programmers
What are the top-rated 2014 Ford Mustang Performance and Racing Products?
Top-rated Performance and Racing Products for your 2014 Ford Mustang based on customer reviews/ratings are:
from
$126.99
(1)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“awesome sound!”
from
$113.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
“sounds great just what I WAS LOOKING FOR.”
from
$199.99
(1)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“Sounds great, highly recommend for any s197 mustang v6”
