2014 Ford Focus Ignition and Tune-Up Products

Essential 2014 Ford Focus Ignition and Tune-Up Products

Carquest Premium – Ignition Switch (Part No.CSC1044)

Ignition Switch

from

$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Ignition Switch (Part No.M5050485258MTR)

Ignition Switch

from

$35.37
Ignition Switch

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6958)

Original Equipment (O.E.) Switch Assembly - Ignition

from

$83.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
  • All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.
See More

Delphi – Knock Sensor (Part No.AS10200)

Knock Sensor

from

$33.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3905)

Ignition Knock (Detonation) Sensor

from

$45.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Knock Sensor (Part No.SBC3865)

Knock Sensor

from

$40.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Accel – Coil:Ford Ecoboost 2.0/2.3L L4: 4-Pack Black (Part No.140670K-4)

Coil:Ford Ecoboost 2.0/2.3L L4: 4-Pack Black

from

$249.99
ACCEL has been offering high quality high output COP coils for Ford’s 2-valve, 3-valve and 5.0L Coyote applications for years, now EcoBoost owners can enjoy the benefits of ACCEL Supercoils as well! ACCEL SuperCoils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils. ACCEL late model Ford EcoBoost SuperCoils are not only available in traditional ACCEL yellow, but in blue and black as well!

Product Features:
  • High temperature vacuum applied epoxy resists shock and vibration
  • Installation usually takes less than an hour
  • Direct OEM replacement
  • ODB II compatible ¿ will not trip an engine code
  • ODB II compatible ┐ will not trip an engine code
  • Choice of three different colors ¿ yellow, blue & black (application dependent)
  • Choice of three different colors ┐ yellow, blue & black (application dependent)
  • Offered in singles and multipacks
See More

Accel – Coil:Ford Ecoboost 2.0/2.3L L4: 4-Pack Blue (Part No.140670B-4)

Coil:Ford Ecoboost 2.0/2.3L L4: 4-Pack Blue

from

$256.99
ACCEL has been offering high quality high output COP coils for Ford’s 2-valve, 3-valve and 5.0L Coyote applications for years, now EcoBoost owners can enjoy the benefits of ACCEL Supercoils as well! ACCEL SuperCoils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils. ACCEL late model Ford EcoBoost SuperCoils are not only available in traditional ACCEL yellow, but in blue and black as well!

Product Features:
  • High temperature vacuum applied epoxy resists shock and vibration
  • Installation usually takes less than an hour
  • Direct OEM replacement
  • ODB II compatible ¿ will not trip an engine code
  • ODB II compatible ┐ will not trip an engine code
  • Choice of three different colors ¿ yellow, blue & black (application dependent)
  • Choice of three different colors ┐ yellow, blue & black (application dependent)
  • Offered in singles and multipacks
See More

Accel – Coil:Ford Ecoboost 2.0/2.3L L4: 4-Pack Yellow (Part No.140670-4)

Coil:Ford Ecoboost 2.0/2.3L L4: 4-Pack Yellow

from

$249.99
ACCEL has been offering high quality high output COP coils for Ford’s 2-valve, 3-valve and 5.0L Coyote applications for years, now EcoBoost owners can enjoy the benefits of ACCEL Supercoils as well! ACCEL SuperCoils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils. ACCEL late model Ford EcoBoost SuperCoils are not only available in traditional ACCEL yellow, but in blue and black as well!

Product Features:
  • High temperature vacuum applied epoxy resists shock and vibration
  • Installation usually takes less than an hour
  • Direct OEM replacement
  • ODB II compatible ¿ will not trip an engine code
  • ODB II compatible ┐ will not trip an engine code
  • Choice of three different colors ¿ yellow, blue & black (application dependent)
  • Choice of three different colors ┐ yellow, blue & black (application dependent)
  • Offered in singles and multipacks
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA3099)

Ignition Coil Connector

from

$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1902)

Ignition Coil Connector

from

$13.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Ignition Coil Connector (Part No.645-302)

Ignition Coil Connector

from

$52.99
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motorcraft – Original Equipment Spark Plug Boot: Stainless steel Core, Qty of 1 (Part No.WR-6144)

Original Equipment Spark Plug Boot: Stainless steel Core, Qty of 1

from

$10.29
Motorcraft Spark Plug Wires are manufactured with premium-quality materials to strict Ford Engineering standards to help maintain AND control high voltage delivery to spark plugs.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 4 Wires (Part No.WR-5974)

Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 4 Wires

from

$64.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-4137)

Spark Plug Wire Set

from

$29.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – Coil on Plug Boot (Part No.58939)

Coil on Plug Boot

from

$8.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-010FMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$23.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Motorcraft – Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 4 Wires (Part No.WR-5969)

Spark Plug Wire: 2 Year Warranty Unlimited Miles, Set of 4 Wires

from

$65.99
Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Optimized wire lengths help minimize part numbers while still providing proper fit.
  • Wires are optimum lengths for easy installation.
  • EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Carquest Premium – Ignition Switch Connector (Part No.PTC1725)

Ignition Switch Connector

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Cornering Light Socket (Part No.PT189)

Cornering Light Socket

from

$23.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

ACDelco – Copper Core Spark Plug: Original Equipment Replacement (Part No.R42LTS)

Copper Core Spark Plug: Original Equipment Replacement

from

$4.99
ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

NGK – G-Power Spark Plug: Single Platinum Tip Design, TR6GP (Part No.5141)

G-Power Spark Plug: Single Platinum Tip Design, TR6GP

from

$5.99
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
See More

NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX (Part No.94567)

Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX

from

$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
  • Specialized OEM Tip Designs: Features DFE and PSPE tip designs for enhanced ignitability and efficiency.
  • Industry-Leading Durability: Ruthenium center electrode ensures long-lasting performance and reliability.
See More

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PT16EPR13 (Part No.5092)

Double Platinum Spark Plug:  OE Performance, lasts 60K+ Miles, PT16EPR13

from

$9.99
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • OE grade platinum on both center and ground electrods
  • Premium shell construction with machine-rolled threads
  • Superior thermal conductivity
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency
  • Satisfied customers, reduced shop comebacks
  • Double Platinum
  • OE Performance: Designed to meet original equipment (OE) performance standards for optimal engine efficiency.
  • Tapered Seat Type: Equipped with a tapered seat type for a secure fit and improved combustion efficiency.
See More

Bosch – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.0221604700)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$92.99
All the ignition coils are built to achieve or exceed OE specifications and are known industry-wide for their reliability and performance. the ignition coils convert low voltage into high ignition system voltage, creating an electric spark sent to the spark plugs which ignites the fuel. the ignition coils provide excellent mechanical stability and corrosion protection. Also, the ignition coils contribute to lower fuel consumption and reduced exhaust emissions for your vehicle.

Product Features:
  • Meets or exceeds OEM specification
  • Ensures reliable voltage for smooth engine performance
See More

Delphi – Ignition Coil (Part No.GN10635)

Ignition Coil

from

$39.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48770)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$99.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Driveworks – Coil on Plug Coil (Part No.26380)

Coil on Plug Coil

from

$62.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

2014 Ford Focus Ignition and Tune-Up Products

You count on your 2014 Ford Focus to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 48 Ignition and Tune-Up Products ranging in price from $5.99 to $338.99, you’re sure to find everything you need for your 2014 Ford Focus.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like E3, ACDelco, and Autolite. 2014 Ford Focus Ignition and Tune-Up Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,898 extensive product reviews on 2014 Ford Focus Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Ignition Switch with 4.5 stars and Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITV20TT with 4.6 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2014 Ford Focus below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2014 Ford Focus

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Ford Focus running right for years to come. In our inventory you’ll find brands like E3, ACDelco, Autolite, and even more.

Popular Carquest Premium Ignition and Tune-Up Products

You’ll find popular Carquest Premium brand products across Ignition Coils and Boots. All are waiting to get your 2014 Ford Focus back on the road. Some of the top-rated Carquest Premium products in these categories are:

Top-Rated Ignition and Tune-Up Products


If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 2014 Ford Focus, and some of our most reviewed parts include:

FAQs for 2014 Ford Focus Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2014 Ford Focus?

Out of 48 Ignition and Tune-Up Products for the 2014 Ford Focus, the most popular in our inventory are:
Iridium Spark Plug: Original Equipment Replacement
from $11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs
Rapidfire Spark Plug
from $7.49
(10)
Rapidfire Spark Plug
Spark Plugs

What are the top-rated 2014 Ford Focus Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2014 Ford Focus based on customer reviews/ratings are:
Ignition Switch
from $70.99
(35)
Ignition Switch
“My ignition switch was failing to engage on my 2007 Ford Escape. I read the online reviews for this brand ” Carquest by BWD ” and purchased it at my ”
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITV20TT
from $10.99
(14)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITV20TT
“Fantastic plugs, remember do NOT gap them (they come pre-gapped).”