from

$37.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$68.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$68.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$183.99

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$53.99

AutoMeter steering column gauge mounts (pod) are covers that install over the top of your vehicle’s factory steering column shroud, providing a clean and convenient location to install an additional 2 1/16″ gauge or two in the driver’s field of vision. These products are vehicle-specific fitment to ensure proper fit and finish and are molded from durable ABS composite material with a black textured finish which can be painted to match your interior trim if desired.

Product Features:

Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the factory cluster and are positioned at optimum viewing angles for at-a-glance readings
Seamlessly integrate 2-1/16″ AutoMeter gauges into your interior
Attaches to the factory column cover for easy installation and includes required mounting hardware
A great addition or alternative to the traditional A-pillar gauge mount
For models equipped with Manual Transmission Only
Paint-To-Match
High quality, composite construction is incredibly durable and looks great

from

$136.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$313.99

Accelerator Pedal Sensor

from

$40.49

This replacement air vent is engineered to match the fit and function of the stock vent assembly on specified vehicles. It is designed to withstand extreme temperature changes for reliable service.

Product Features:

Ideal replacement – this air vent matches the fit and function of the original part on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes for excellent durability in all conditions
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$81.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$95.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$81.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$74.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$345.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$308.99

This seat heater control module matches the fit and function of the original equipment part for specified years, makes and models. It’s made from quality materials for reliable service..

Product Features:

Direct replacement – this seat heater control module matches the fit and function of the factory module for specified years, makes and models.
Restores function – this replacement module restores the seat heater function when the original part has experienced a circuit failure or been damaged by corrosion
Durable construction – made from quality materials for reliable service
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$82.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$118.90

Heated Seat Module C

from

$95.99

UltiMat dashboard covers are the best fitting, best looking dashboard cover on the market. Construction begins with durable, color-fast non-shrinking need punch carpet that goes through a soft mold process to fit the exact shape of your dashboard. This technique creates a PERFECT fit on every ridge and curve of your dashboard, all without seams or darts. Available to fit most trucks and SUV’s. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The best fitting best looking dash cover on the market for trucks and SUV’s
Soft molded to the exact shape of your dashboard
A perfect fit on every ridge and curve of your dashboard
Made of durable color-fast non-shrinking needle punch carpet
All vents and sensor openings pre-cut for a factory-finished look

from

$95.99

UltiMat dashboard covers are the best fitting, best looking dashboard cover on the market. Construction begins with durable, color-fast non-shrinking need punch carpet that goes through a soft mold process to fit the exact shape of your dashboard. This technique creates a PERFECT fit on every ridge and curve of your dashboard, all without seams or darts. Available to fit most trucks and SUV’s. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The best fitting best looking dash cover on the market for trucks and SUV’s
Soft molded to the exact shape of your dashboard
A perfect fit on every ridge and curve of your dashboard
Made of durable color-fast non-shrinking needle punch carpet
All vents and sensor openings pre-cut for a factory-finished look

from

$4.99

BODY FASTENER

from

$30.49

This transfer case shift knob is designed to match the fit and appearance of the original knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transfer case shift knob is designed to match the fit and appearance of the original knob on specified vehicles
Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$37.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$127.20

Motorcraft multifunction switch assemblies meet the demands of the sophisticated electrical systems of current Ford and Lincoln vehicles.

Product Features:

For ease of installation, requires no cutting or splicing to adapt existing wiring and/or harnesses
Designed to fit Ford and Lincoln vehicles
Critical to driver and passenger safety
Recommended by Ford Motor Company

from

$335.99

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

Heavy duty polycotton fabric for durability and comfort
Custom made for your specific year, make and model seats
Headrest and armrest covers are also included if equipped
Easy installation and removal
Machine washable

from

$477.99

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

Classic Duck Weave Carhartt fabric for durability
Custom made for your specific year, make and model seats
Headrest and armrest covers are also included if equipped
Easy installation and removal
Machine washable

from

$351.99

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

Vehicle tested before engineering approval
Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
Light fast, color fast materials will not run or fade and can be hand washed
Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
Center armrest/console covers and head rest covers included (most applications)
Rear split seat 60/40, adjustable headrests
Leatherette
Black w/Gray Center Panel
2 Year Limited Liability

from

$378.99

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

Vehicle tested before engineering approval
Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
Light fast, color fast materials will not run or fade and can be hand washed
Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
Center armrest/console covers and head rest covers included (most applications)
Rear split seat 60/40, adjustable headrests, armrest w/cupholder, center seatbelt, for Super Crew
Leatherette
Black w/Gray Center Panel
2 Year Limited Liability