2014 Ford Expedition Drive Shafts and Axles
More 2014 Ford Expedition Drive Shafts and Axles
Find your specific 2014 Ford Expedition original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2014 Ford Expedition Drive Shafts and Axles
Yukon Gear – Stub Axle Snap Ring Clip For 8.8" Ford IFS (Part No.33271)
from
$37.99
Stub axle snap ring clip for 8.8″ Ford IFS.
Product Features:
See More
Product Features:
- Stub axle snap ring
- Fits Ford 8.8″ IFS
Yukon Gear – 9.75" Ford C-Clip (Part No.33248)
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
National – Bearings (Part No.207)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Center Support Bearing Motor Mount: Rear, 1 Piece (Part No.6140)
from
$131.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 09-21; LINCOLN 09-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2009-2021
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.38 INCH / 60 MM
- MOUNT WIDTH: 6.15 INCH / 156 MM
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV717251)
from
$164.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – New CV Axle (Part No.NCV11157)
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV428573)
from
$137.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Yukon Gear – 8.8" IFS Side Stub Axle Seal, Left Hand & Right Hand (Part No.30256)
from
$36.99
8.8″ IFS side stub axle seal, left hand & Right hand.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front inner axle seal
- Fits Ford 8.8″ IFS
Yukon Gear – Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing (Part No.30140)
from
$21.99
Axle seal for semi-floating Ford and Dodge with R1561TV bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits Ford and Dodge applications
- 2.985″ O.D.
- 1.700″ I.D.
SKF – Axle Seal (Part No.K4021285310SKF)
from
$13.35
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
NTN – Wheel Bearing (Part No.K8000345509NTN)
from
$90.54
Wheel Bearing
Driveworks – Wheel Bearing (Part No.S-RP-1561-FO)
National – Bearings (Part No.FC-66998)
from
$10.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Universal Joint (Part No.DW-331BL)
from
$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-2001)
from
$481.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-424)
from
$1083.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft (Part No.986-243)
from
$675.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2014 Ford Expedition Drive Shafts and Axles Categories
2014 Ford Expedition Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2014 Ford Expedition. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 22 different Drive Shafts and Axles in our inventory ranging from $10.49 to $1,117.99. That means you can find the exact parts or products you need to keep that 2014 Ford Expedition running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Ford Expedition. Spicer, National, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2014 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 288 reviews in this category, some of the top rated parts include Universal Joint with 5.0 stars and CV Axle Shaft Assembly with 5.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2014 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2014 Ford Expedition Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Dorman – Help Drive Shafts and Axles
We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts categories, plus more. For a 2014 Ford Expedition, our most popular Dorman – Help Drive Shafts and Axles include:
Top 2014 Ford Expedition Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 2014 Ford Expedition. Popular National parts include:
FAQs for 2014 Ford Expedition Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2014 Ford Expedition?
Out of 22 Drive Shafts and Axles for the 2014 Ford Expedition, the most popular in our inventory are:
What are the top-rated 2014 Ford Expedition Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 2014 Ford Expedition based on customer reviews/ratings are:
from
$25.99
(1)
Axle Shaft Seal
“The 1st thing that hit me was the quality of the seal ! However, I was getting ready to get unda my car to pull the pin & C-clamp that holds the axle ”
