2014 Dodge Durango Exhaust Parts

Essential 2014 Dodge Durango Exhaust Parts

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21338)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$142.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval

from

$102.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Walker – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51130)

Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$80.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
  • COMPATIBILITY – Ideal for weld or clamp installations
See More

Walker – Front Pipe Aluminized 18.625" (Part No.40235)

Front Pipe Aluminized 18.625"

from

$137.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Taylor Gaskets – Vibe-Lock Bolt (Part No.310071)

Vibe-Lock Bolt

from

$92.99
Vibe-Lock Bolt

Dorman – Help – Exhaust Manifold Mount Hardware Kit Stainless Steel (Part No.03309HP)

Exhaust Manifold Mount Hardware Kit Stainless Steel

from

$55.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Upgraded hardware – this set of M8-1.25 x 40mm exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance
  • Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
  • Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Walker – Clamp Band Bolt Dia Length Nut Type Lock Pipe Dia 2.375 (Part No.36523)

Clamp Band Bolt Dia Length Nut Type Lock Pipe Dia 2.375

from

$25.49
Complete your exhaust repair with a Walker® MEGA preformed band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
  • PREMIUM MATERIALS – Made from a variety of materials including low-carbon steel or stainless steel for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

AP Exhaust – Exhaust Clamp (Part No.H80202393166APE)

Exhaust Clamp

from

$5.09
The AP Exhaust / Exhaust Clamp is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Walker – Intermediate Pipe Aluminized 36" (Part No.53600)

Intermediate Pipe Aluminized 36"

from

$50.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust 55712 Exhaust Intermediate Pipe (Part No.55712)

Exhaust 55712 Exhaust Intermediate Pipe

from

$51.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust 54549 Exhaust Resonator and Pipe Assembly (Part No.54549)

Exhaust 54549 Exhaust Resonator and Pipe Assembly

from

$125.99
Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Dynomax – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52499)

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$125.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products – engineered for

Product Features:
  • Dynomax Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax product is backed by engineers who know what you want and expect out of a performance exhaust product.
  • Mandrel bends improve flow capacity over traditional bends
  • Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
  • Pipe diameters are increased from OEM sizes to improve flow and increase power
  • Dynomax Exhaust Systems are manufactured with precision benders, & then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
See More

JBA Performance – 1945S-1JS 1 1/2" Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Silver Ceramic (Part No.1945S-1JS)

1945S-1JS 1 1/2" Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Silver Ceramic

from

$714.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1945S-1JS 1 1/2″ Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Silver Ceramic
  • Mandrel bent stainless steel tube
See More

JBA Performance – 1945S-1 1 1/2" Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango (Part No.1945S-1)

1945S-1 1 1/2" Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango

from

$557.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1945S-1 1 1/2″ Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango
  • Mandrel bent stainless steel tube
See More

Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95463)

EXHAUST MANIFOLD GASKET SET

from

$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97197)

Exhaust Manifold Gasket Set

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51348)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$965.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51348. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2002-2003 Dodge Durango and interchanges with OE parts 5210 3537AE and 5210 3537AA, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51355)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$202.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51355 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31391)

Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials

from

$11.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61289)

Exhaust Pipe Flange Gasket

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15659)

Street Series Cat-Back Performance Exhaust System

from

$736.99
The MagnaFlow 2000-2003 Dodge Durango Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.7L, 5.9L 2000-2003 Dodge Durango with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Dodge Durango exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Durango’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15659 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15659 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 6" L Round (Part No.140449)

T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 6" L Round

from

$1762.99
The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:
  • Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
  • Increases The Overall Sound Level And Performance
  • Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
  • Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
  • Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
See More

Dorman – Exhaust Manifold Hardware And Gasket Kit (Part No.57073)

Exhaust Manifold Hardware And Gasket Kit

from

$123.99
5.7L HEMI engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

Product Features:
  • Direct replacement – the components in this kit are designed to match the function of the original equipment exhaust manifold gaskets and mounting hardware on specified vehicles
  • Time-saver – hassle-free alternative to searching for quality replacements for original equipment components that have failed from heat cycling or corrosion
  • Application-specific – precision manufactured to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Stud (Part No.03211CD)

Exhaust Manifold Stud

from

$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Mount Hardware Kit Stainless Steel (Part No.03218HP)

Exhaust Manifold Mount Hardware Kit Stainless Steel

from

$31.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Upgraded hardware – this set of exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance
  • Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
  • Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03309CD)

Exhaust Manifold Hardware Kit

from

$46.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03425)

Exhaust Manifold Hardware Kit

from

$24.99
Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

2014 Dodge Durango Exhaust Parts

You count on your 2014 Dodge Durango to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 38 Exhaust Parts ranging in price from $2.49 to $1,762.99, you’re sure to find everything you need for your 2014 Dodge Durango.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 8 different brands like Felpro, Walker, and Dorman. 2014 Dodge Durango Exhaust Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 56 extensive product reviews on 2014 Dodge Durango Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Vibe-Lock Bolt with 2.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2014 Dodge Durango below to get started!

Top-Rated Exhaust Parts Brands For Your 2014 Dodge Durango

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Dodge Durango running right for years to come. In our inventory you’ll find brands like Felpro, Walker, Dorman, and even more.

Popular Felpro Exhaust Parts

You’ll find popular Felpro brand products across Exhaust Gaskets. All are waiting to get your 2014 Dodge Durango back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Manifold Gasket Set
from $51.99
(6)
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets

FAQs for 2014 Dodge Durango Exhaust Parts

What are the most purchased Exhaust Parts for the 2014 Dodge Durango?

Out of 38 Exhaust Parts for the 2014 Dodge Durango, the most popular in our inventory are:
Direct Fit Exhaust Manifold: Without Heat Shield
from $154.99
(2)
Direct Fit Exhaust Manifold: Without Heat Shield
Exhaust Manifold and Headers
Clamp Band Bolt Dia Length Nut Type Lock Pipe Dia 2.375
from $25.49
This product is not rated
Clamp Band Bolt Dia Length Nut Type Lock Pipe Dia 2.375
Exhaust Clamps

What are the top-rated 2014 Dodge Durango Exhaust Parts?

Top-rated Exhaust Parts for your 2014 Dodge Durango based on customer reviews/ratings are:
Vibe-Lock Bolt
from $92.99
(1)
Vibe-Lock Bolt
“I was putting them on my new BBK headers and on of them broke right off. Brand new. I was torquing then down. So luckily I didn’t have everything back”