from

$14.99

VAL EP ATF 6/1 QT

from

$1157.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$300.46

Differential Lock Ac

from

$51.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.49

Product Features:

CRUSH SLEEVE 12 BLT CAR

from

$609.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Toyota Tacoma and T100 rear with factory locking differential
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$12.99

07 and up Tundra rear 10.5″ ring gear bolt W/ 5.7L.

Product Features:

Ring gear bolt
Fits 10.5″ Toyota Tundra

from

$14.99

T100 & Tacoma w/LOC pinion nut.

Product Features:

Pinion nut
Fits Toyota Tacoma and T100 with factory locking differential

from

$6.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$119.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$313.99

This differential lock actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Ideal replacement – this differential lock actuator directly replaces the original equipment part on specific vehicle years, makes and models
Effective fix – installation addresses inoperative differential lock caused by failed original actuator
Cost-effective solution – offers original equipment fit and function at a competitive price
Trustworthy quality – backed by a team of designers and engineers in the United States

from

$145.99

DiffrlCarrBng

from

$15.99

Toyota 07 & up Tundra rear 10.5″ outer pinion slinger w/ 5.7L .

Product Features:

Outer slinger
Fits 10.5″ Toyota Tundra

from

$18.16

Differential Seal

from

$1020.26

Transfer Case Motor

from

$21.22

With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$391.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Toyota T100 & Tacoma rear without factory locking differential
8.125″ ring gear diameter
30 spline pinion
12 ring gear bolts
4.88 ratio

from

$6.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$139.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Toyota Tacoma and T100 without factory locking differential
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$36.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Compatible with most oils and EP lubricants at higher operating temperatures
High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
Temperature range: -20°F to 300°F; -29°C to 149°C
National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.

from

$146.91

Wheel Bearing Assemb

from

$106.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 93-21;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1993-2021
Weight approx: 2 Lbs
BEARING ID / BORE: 1.1811 INCH / 30 MM
CENTERLINE: 0.50 INCH / 13 MM
MOUNT WIDTH: 6.00 INCH / 152 MM
BOTTOM: SINGLE WEEP HOLE
FRONT
CUT-OUT NOTCH

from

$42.99

Outside axle seal for 7.5″, 8″ and V6 Toyota rear.Yukon Mighty seal.

Product Features:

Rear outer axle seal
Fits Toyota 7.5″, 8″ with 4 cylinder engine, and V6

from

$4.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$27.49

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$15.99

Product Features:

Carrier shim kit for Dana Spicer 30 with 30 spline axles

from

$928.99

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:

Easier installation – this loaded axle assembly includes a pre-assembled new axle shaft, wheel bearing, hub and backing plate
Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life