2013 Jeep Wrangler Bodies and Fender Parts

Essential 2013 Jeep Wrangler Bodies and Fender Parts

KAI – Fender Liner (Part No.CH1763100)

Fender Liner

from

$28.99
New Standard Replacement Passenger Side Rear Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Energy Suspension – BodyMntBshKt (Part No.2.4109G)

BodyMntBshKt

from

$354.99
BodyMntBshKt

KAI – Spare Tire Bracket (Part No.CH5998100)

Spare Tire Bracket

from

$374.99
New Standard Replacement Spare Tire Bracket, Includes High Mount Stop Lamp

Product Features:
  • Includes High Mount Stop Lamp, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rugged Ridge – Locking Console (Part No.13102.37)

Locking Console

from

$244.99
This spice ultimate locking console is the best storage solution for your Jeep. Each console is constructed of vinyl wrapped around plastic coated hard wood to keep moisture out and provide a great looking addition that matches the interior of your Jeep.

Product Features:
  • Spice
  • Locking Top Compartment
  • 6 Can Cooler
  • Hardware Included
  • Weather Resistant
See More

Rugged Ridge – Tire Carrier Spacer (Part No.11585.02)

Tire Carrier Spacer

from

$95.99
Bolts to your existing factory spare tire mount and relocates the tire two inches up and out. Features 5×4.5 inch and 5×5.5 inch wheel bolt patterns and tough powder coated black textured finish. Caution: The tailgates on 07-12 Wrangler models are not des

Product Features:
  • Black Powder Coated
  • 5×4.5 in. and 5×5.5 in. Wheel Bolt Patterns
  • Bolts To Your Existing Factory Spare Tire Mount
  • Relocates the tire two inches up and out
  • Limited 5 Year Warranty
See More

Rampage – Xtremeline 6 in. Oval Step Bar Cab Length, Semi-Gloss Black, 80 in., Pair (Part No.16180)

Xtremeline 6 in. Oval Step Bar Cab Length, Semi-Gloss Black, 80 in., Pair

from

$306.99
Xtremeline / Streamline bars -The new and unique design has the styling appeal of a side bar coupled with easy installation features and strength of a running board. With a 5-inch step these bars have over 50% more step area than regular tube steps. Stylish custom molded end caps add streamline styling, can be painted for a custom finish and seals the step from moisture. Results in an OEM finished look. No Drilling most applications – Heavy-duty mounting brackets mount to existing factory holes. A new innovation in mounting brackets make installing these bars quick & easy and the bar can be positioned forward or back to compliment individual style or bar location needs. Rampage Exclusive: Galvanized Steel – Powder Coat, Weather Seal Brackets, Note: Xtremeline and Streamline Bars may also be installed with other aftermarket flat top installation brackets by using the Rampage Top Clamp Conversion Kit.

Product Features:
  • New And Unique Design
  • 5 in. Step Pads
  • Custom Molded End Caps For Streamline Styling
  • Sealed To Prevent Moisture
  • No Drill Installation
  • Newly Innovated Installation Brackets
  • Quick Easy And Reliable Install
  • Vehicle Specific Mount Required
  • Must Be Purchased Separately
See More

Omix – T-Style Fender Flare And Rocker Molding Clip (Part No.11609.28)

T-Style Fender Flare And Rocker Molding Clip

from

$4.29
This black replacement T-style fender flare and rocker panel molding clip from Omix-ADA allows you to attach your factory fender flares to the sides of your Jeep. The clip is constructed of durable thermoplastic material and injection molded for a direct

Product Features:
  • Black
  • OE Style
  • Direct Fit
  • Attach Your Fender Flares To Sides Of Your Jeep
  • Limited 5 Year Warranty
See More

Westin – HDX Stainless Drop Nerf Step Bars (Part No.56-140652)

HDX Stainless Drop Nerf Step Bars

from

$775.99
Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Product Features:
  • Corrosion Resistant Black Powder-Coated Stainless Steel
  • Die Stamped Stainless Steel Step Areas For Maximum Traction
  • Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
  • Features A Notched Bar Design With Heavy-Duty Step Plate
  • Includes Rust Resistant Stainless Steel Step Plates
  • Removable Step Plates For Easy Cleaning
  • Fits Tight To Rocker Panel
  • Solid 1-Piece Construction
  • Bolt-On Installation No Drilling Required For Most Applications
  • Mount Kit Included
See More

KAI – Front Passenger Side Fender Brace (Part No.CH1245100)

Front Passenger Side Fender Brace

from

$59.99
New, Standard Replacement Passenger Side Fender Flare Bracket

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Or Modifications Needed For Installation
  • Same Form Fit As OE
See More

Rugged Ridge – Door Handle Inserts; (Part No.13311.45)

Door Handle Inserts;

from

$115.99
Door Handle Inserts;

TrailFX – Flat Style, 7.5"Tire Coverage, Textured, Black, 1.5"Steel Tubing, Set Of 2 (Part No.J052FF)

Flat Style, 7.5"Tire Coverage, Textured, Black, 1.5"Steel Tubing, Set Of 2

from

$378.99
Protect your paint and add tough and rugged protection. TrailFX Fender Flares offer additional tire coverage and are perfect to spotlight large wheel and tire packages. Proudly made in the U.S.A, these flare are available in UV-resistant smooth or textured finish. TrailFX Fender Flares are the perfect accessory for a new look and added protection.

Product Features:
  • UV-Resistant To Protect Against Fading
  • Smooth, Paintable Surface
  • Protects Your Truck Or SUV Against Rocks And Debris
  • Tough And Durable ABS Thermoplastic
  • Wide, Bolt-On Style Complements Larger Wheel And Tire Packages
  • Easy No Drill Installation Utilizing Factory Attachment Locations
See More

Omix – Main Engine Bearing Set (Part No.17465.12)

Main Engine Bearing Set

from

$115.99
Are you rebuilding an engine and need a fresh set of main bearings? Omix-ADA offers high-quality replacement main bearing sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • Standard
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Fender (Part No.12040.02)

Fender

from

$302.99
Is your front fender rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old fender when you can start with a new one?

Product Features:
  • Black
  • OE Style
  • Direct Fit
  • Right Side
  • Limited 5 Year Warranty
See More

Dorman – Panel Trim Retainer – Interior – GM/Chrysler/AMC (Part No.45490)

Panel Trim Retainer - Interior - GM/Chrysler/AMC

from

$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Rugged Ridge – Spartacus HD Tire Ca (Part No.11546.56)

Spartacus HD Tire Ca

from

$631.99
Spartacus HD Tire Ca

KAI – Fender Splash Shield (Part No.CH1250132C)

Fender Splash Shield

from

$58.99
New CAPA Certified Standard Replacement Driver Side Fender Splash Shield, With Aluminum Pin

Product Features:
  • With Aluminum Pin, Made Of High Density Polyethylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Omix – LiftgateSeal (Part No.12304.20)

LiftgateSeal

from

$89.99
LiftgateSeal

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1725)

Premier Oval Nerf Step Bar Mount Kit

from

$174.99
Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:
  • Required Part For Oval Tubes
  • Vehicle Specific Mount Kit Insures Proper Fit
  • 5 Year Warranty
See More

Covercraft – Custom Hood Protector (Part No.45491-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

BOLT – Jeep Spare Tire Lock (Part No.5922986)

Jeep Spare Tire Lock

from

$46.99
Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.
See More

Rugged Ridge – Hurricane Fender Fla (Part No.11640.09)

Hurricane Fender Fla

from

$841.99
Hurricane Fender Fla

Omix – Fender Flare Retainer (Part No.11609.26)

Fender Flare Retainer

from

$4.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Black
  • OE Style
  • Direct Fit
  • Secures Fender
  • Limited 5 Year Warranty
See More

Omix – Replacement Fender Flare Support Bracket (Part No.12029.37)

Replacement Fender Flare Support Bracket

from

$179.99
This black left fender flare support bracket uses factory hardware and offers a direct fit with no drilling required.

Product Features:
  • Black
  • Direct Fit
  • Uses Factory Hardware
  • OE Style
  • Limited 5 Year Warranty
See More

Dorman – Interior Panel Retai (Part No.O6125962213DOR)

Interior Panel Retai

from

$2.46
Interior Panel Retai

Rugged Ridge – Splash Guard Kit (Part No.11642.11)

Splash Guard Kit

from

$64.99
Looking for some protection for the bottom and lower side panels of your vehicle to prevent mud and water splatters? Rugged Ridge has you covered with our Splash Guards! Featuring high quality injection molded TPE material; these guards are paintable and

Product Features:
  • Front only
  • Injection Molded TPE
  • Paintable
  • Prevents Mud and Water Splatter
  • Limited 5 Year Warranty
See More

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120100)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech Mud Flap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech Mud Flap will offer undeniable vehicle protection.

Product Features:
  • Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
  • Feature The Patented QuickTurn Hardened Stainless Steel Fastening System
  • Mud Flap Will Offer Undeniable Vehicle Protection
  • No Drilling Required
See More

Skyjacker – Spare Tire Relocation Kit (Part No.STRJK212)

Spare Tire Relocation Kit

from

$79.99
Skyjacker was established in 1974. We grew from a one bay garage into an international manufacturing warehouse. Skyjacker continues to strive to stay ahead of the game in the aftermarket industry. Skyjacker builds quality suspension products.

Product Features:
  • Made From Premium Materials
  • Meets The Highest Quality Standards
  • Provide A Smooth, Comfortable Ride
  • Maintain That Factory Ride Quality
  • Easy Installation
See More

Westin – WJ2 Spare Tire Relocator (Part No.59-89005)

WJ2 Spare Tire Relocator

from

$147.99
Westins WJ2 Spare Tire Relocator allows Jeep JL owners to accommodate a tire up to 37″ in diameter while maintaining factory design elements such as rear view camera and third brake light functionality. Two 8 gauge steel plates provide added strength to safely re-position the spare outward and upward and at the same time support the added weight of the larger spare tire. The WJ2 Spare Tire Relocator is an innovative upgrade to your Jeep JL, great finish, easy to install and fully functional.

Product Features:
  • Accommodates A Tire Up To 37 in. Diameter
  • Retains Use Of Factory 3rd Brake Light And Rear View Camera
  • Retains Functionality Of Factory Spare Tire Rubber Isolators
  • No Modification Of Factory Wiring Required
See More

2013 Jeep Wrangler Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 2013 Jeep Wrangler. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 154 different Bodies and Fender Parts in our inventory ranging from $2.46 to $1,092.99. That means you can find the exact parts or products you need to keep that 2013 Jeep Wrangler running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 2013 Jeep Wrangler. Omix, Dorman, and Dee Zee are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 2013 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 27 reviews in this category, some of the top rated parts include Premier 6 Oval Nerf Step Bars with 2.0 stars.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 2013 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 2013 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Dorman Bodies and Fender Parts

We carry Dorman parts in our stock across Rocker Panel Molding Retainers categories, plus more. For a 2013 Jeep Wrangler, our most popular Dorman Bodies and Fender Parts include:
GM Plastic Blind Rivet - Diameter 35/64 In.
from $4.49
(1)
GM Plastic Blind Rivet – Diameter 35/64 In.
Rocker Panel Molding Retainers

Top 2013 Jeep Wrangler Bodies and Fender Parts from ARIES

ARIES products are another trusted brand when it comes to Bodies and Fender Parts for your 2013 Jeep Wrangler. Popular ARIES parts include:
Jeep Tire Relocation Carrier Kit
from $65.99
(2)
Jeep Tire Relocation Carrier Kit
Spare Tire Carrier Mounts

FAQs for 2013 Jeep Wrangler Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 2013 Jeep Wrangler?

Out of 154 Bodies and Fender Parts for the 2013 Jeep Wrangler, the most popular in our inventory are:
T-Style Fender Flare And Rocker Molding Clip
from $4.29
This product is not rated
T-Style Fender Flare And Rocker Molding Clip
Body Moulding Sets
Front Driver Side Fender Brace
from $59.99
This product is not rated
Front Driver Side Fender Brace
Fender Braces

What are the top-rated 2013 Jeep Wrangler Bodies and Fender Parts?

Top-rated Bodies and Fender Parts for your 2013 Jeep Wrangler based on customer reviews/ratings are:
Premier 6 Oval Nerf Step Bars
from $439.99
(1)
Premier 6 Oval Nerf Step Bars
“While the core unit itself is good construction, it doesn’t come with the hardware (pipes and seals) required in order to connect to the heater hoses.”