2013 GMC Yukon Performance and Racing Products
More 2013 GMC Yukon Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2013 GMC Yukon, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2013 GMC Yukon Performance and Racing Products
Energy Suspension – MotorMt (Part No.3.1152G)
from
$46.99
MotorMt
Energy Suspension – Transmission Mount (Part No.3.1129R)
from
$83.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
Hypertech – Street Runner Power Computer Chip (Part No.124481)
from
$204.49
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Motive Gear – Performance Differential Ring and Pinion (Part No.G885308)
Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)
Motive Gear – Performance Differential Ring and Pinion (Part No.G885273)
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
Fram – High Performance Spin-on Oil Filter: Ideal for Racing Oil (Part No.HP4)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-12332-GR)
from
$429.99
8″ Tall Air Filter:This intake system utilizes an oil free, 8″ tall inverted top conical 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum airflow and performance.Mandrel-Bent Tubing:One-Piece 3-1/2″ Mandrel-Bent Powder-Coated matte gray aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque.One-Piece Heat Shield:Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.3-Angle Adaptor:The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response.Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Note 1: Does NOT fit eAssist models.
Product Features:
See More
Product Features:
- Dyno-Proven Gains up to +18 HP and +23 Lbs. x Ft. TQ
- Outflows Factory Intake by 55%
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- 3-1/2″ Mandrel-bent Powder-coated matte gray aluminum intake tube improves volumetric efficiency for better performance
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12332-GR)
from
$429.99
Magnum FORCE Stage-2 Cold Air Intake Systems provide an open-element design that showcase large air filters and produce a bolder engine tone than other intake designs. The open accessible design makes monitoring and servicing the air filter a breeze, while adding an aggressive style to your engine bay. The PRO 5R Air Filter provides maximum air flow resulting in the highest horsepower and torque gains, while maintaining an excellent airflow and 98.6% filter efficiency best suited for street and track use.
Product Features:
See More
Product Features:
- Powder-Coated One Piece Heat-shield utilizes stock mounting locations
- 3-angle filter adaptor increases air velocity after the air filter for improved performance and throttle response
- Mandrel-Bent Powder-coated aluminum intake tube improves performance
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9900K)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
Flowmaster Inc. – 70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.853072)
from
$232.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Recommended for SUV/trucks/motorhomes/tow vehicles
- Improved horsepower, torque and potential mileage improvement
- Race proven patented Delta Flow technology
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.8043043)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)
from
$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Deep aggressive exhaust note
- Noticeable interior resonance
- Excellent performance on high horsepower vehicles
- No internal packing to blowout
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)
from
$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)
from
$126.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
- O.D.: 1.254″, I.D.: .880″
- Single valve springs with damper
- Approximately .490″ max lift at recommended installed height
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Hypertech – React Throttle Optimizer Off-Road Version – GM (Part No.105402)
from
$328.99
The REACT offers fully customizable control over your vehicle’s throttle response. The simple control knob allows you to switch between multiple modes and control the throttle intensity of each mode on-the-fly. The REACT installs easily and is completely plug-and-play, has an automatic setup sequence so no disassembly is required, comes with a magnetic A/C vent mount (Pedestal swivel mount also available – Sold separately at hypertech.com/REACT.aspx), and doesn’t void your factory warranty. Plus the REACT is internet updateable. Three (3) versions of the REACT throttle optimizer are available to fit your particular driving needs… Performance, Off-Road, and Tow.
Product Features:
See More
Product Features:
- Internet Updateable
- Throttle Control
- Not For Sale Or Use In California
- Product might not be available in all states due to local laws.
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Power Computer Chip (Part No.124152)
from
$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.71-3070)
from
$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter (Part No.57-3058)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.77-3058KP)
from
$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – BodyMntBshKt (Part No.3.4156R)
from
$346.99
BodyMntBshKt
Popular 2013 GMC Yukon Performance and Racing Products Categories
2013 GMC Yukon Performance and Racing Products
You count on your 2013 GMC Yukon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 25 Performance and Racing Products ranging in price from $17.99 to $592.99, you’re sure to find everything you need for your 2013 GMC Yukon.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 11 different brands like K&N, Spectre, and SCT Performance. 2013 GMC Yukon Performance and Racing Products start as low as $17.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,042 extensive product reviews on 2013 GMC Yukon Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter with 4.7 stars and VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT with 4.1 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2013 GMC Yukon below to get started!
Top-Rated Performance and Racing Products Brands For Your 2013 GMC Yukon
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 GMC Yukon running right for years to come. In our inventory you’ll find brands like K&N, Spectre, SCT Performance, and even more.
Popular Flowmaster Inc. Performance and Racing Products
You’ll find popular Flowmaster Inc. brand products across Performance Exhaust Products. All are waiting to get your 2013 GMC Yukon back on the road. Some of the top-rated Flowmaster Inc. products in these categories are:
from
$221.99
(1)
70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound
Performance Exhaust Mufflers
Top-Rated K&N Performance and Racing Products
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Performance and Racing Products for your 2013 GMC Yukon, and some of our most reviewed K&N parts include:
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$399.99
(39)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits
from
$399.99
(16)
Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
FAQs for 2013 GMC Yukon Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2013 GMC Yukon?
Out of 25 Performance and Racing Products for the 2013 GMC Yukon, the most popular in our inventory are:
from
$456.99
This product is not rated
Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges
Computer Chip Programmers
from
$469.99
(9)
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
Performance Computer Prom and Chips
What are the top-rated 2013 GMC Yukon Performance and Racing Products?
Top-rated Performance and Racing Products for your 2013 GMC Yukon based on customer reviews/ratings are:
from
$349.99
(15)
Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter
“Fast shipping, easy install (about 40 min…had time to kill between parent teacher conferences on afternoon) and looks great! Great product.”
