2013 GMC Yukon Performance and Racing Products
Find Your Specific 2013 GMC Yukon Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 2013 Yukon. Advance Auto Parts has popular Yukon parts like Performance Oil Filters, Performance Steering Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Yukon model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2013 GMC Yukon Performance and Racing Products below and start saving instantly.
Popular 2013 GMC Yukon Performance and Racing Products Categories
Essential Performance and Racing Products for 2013 GMC Yukons
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
Hooker Headers – Competition Turbo Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Mild Sound (Part No.21005HKR)
from
$71.99
Competition Turbo Mufflers utilized a low back pressure baffle network designed to flow in either direction resulting in better performance and economy.
Product Features:
See More
Product Features:
- Low Backpressure Baffle Network
- Compact Design
- Improved Engine Efficiency
- Better Performance And Economy
- Throaty Sound On Acceleration
- Quiet At Idle And Cruising
- Double Wrapped Aluminized Steel
Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam (Part No.12-230-2)
from
$226.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Airaid – Junior Air Intake System (Part No.200-796)
from
$262.99
The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube And the paper filter, in order to help boost horsepower And mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter And an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten And improve clean air flow to the engine for added throttle response And increased horsepower And torque. Each kit is custom made to fit specific vehicles And is easy to install And requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable And fully backed by the AIRAID No-Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.
Product Features:
See More
Product Features:
- Installs In Minutes
- Works Great w/Airaid Premium Filters
- Complete w/Premium Hardware
- Simple Design And Function
- Boost Horsepower And Mileage
- Requires No Drilling
- Lifetime No Hassle Warranty(limited)
aFe POWER – Momentum XP Cold Air Intake: Gain up to 15 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-30028R)
from
$499.99
Unique One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Large 5-Layer Performance Air Filter:This Momentum XP intake system was designed around the largest filter possible to allow maximum performance and filtration. Its unique filter-to-housing interface (US PAT 9440175) not only makes for a simple installation, but also allows for a large inverted 3.8″x 9″ air filter. The filter’s Pro 5R media features five progressively finer porosity cotton gauze layers that provide maximum airflow and performance. Mandrel-Bent Tubing:A one piece 3.5″ mandrel-bent wrinkle-black powder-coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Premium Hardware:Premium stainless-steel t-bolt clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- Outflows factory intake by 30%
- Built-in sight window provides easy filter inspection without disassembly
- Unique filter-to-housing interface for easy installation (US PAT 9440175)
- Enjoy lifelong performance with a washable and reusable Pro 5R air filter
Competition Cams – XE Computer Control 206/212 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-249-4)
from
$390.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
- 249/260 Advertised Duration, 206/212 Duration @ .050″, .434″/.444″ Lift, 112 Lobe Separation
- Valve spring upgrade required
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL12-600-4)
from
$914.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
- 279/297 Advertised Duration, 227/241 Duration @ .050″, .479″/.465″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)
from
$77.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Grade 8 Steel
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2135)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Spectre – Spectre Replacement Air Filter (Part No.HPR8755)
from
$42.49
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Chevy and GM truck applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
Energy Suspension – BodyMntBshKt (Part No.3.4156G)
from
$369.99
BodyMntBshKt
Energy Suspension – Body Cab Mount Set (Part No.3.4146R)
from
$195.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Rancho – RS9000XL Suspension Strut (Part No.RS999786)
from
$315.99
Get premium control and performance with Rancho RS9000XL struts. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL struts are ideal for on- and off-road use, towing and more.
Product Features:
See More
Product Features:
- NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
- DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
- INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
- REDUCES FADE – Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
- STRONG AND DURABLE – Features an application-specific nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and sintered iron piston for enhanced structural integrity
- SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
- BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
- Added strength and durability
- Provided 9 different levels of strut performance
- Premium long lasting finish
- Enhances strut performance and durability
- Added protection for the strut rod and oil seal
Richmond Gear – RngPnn (Part No.69-0169-1)
from
$351.99
RngPnn
Richmond Gear – RngPnn (Part No.49-0019-1)
from
$399.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.G885513)
Richmond Gear – RngPnn (Part No.49-0041-1)
from
$342.99
RngPnn
Spectre – Spectre Air Intake Kit (Part No.9918)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a red washable, reusable, pre-oiled Spectre HPR (High-Performance Racing) air filter, polished aluminum intake tubing and a black powder coated heat shield to help prevent hot engine air from entering the intake inlet. This air intake system places the air filter on the driver side of the engine compartment. Spectre air intakes come with velocity stack, couplers, stainless steel clamps, breather hoses, and all necessary hardware for an OE fit and finish. The Spectre Intake tube has provisions to install the stock MAF sensor, and breather tube.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
Spectre – Spectre Air Intake Kit (Part No.9910)
from
$209.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.71-3082)
from
$524.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
- DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
- IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
- BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
- PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
- DRYFLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable synthetic media to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 50,000 miles under normal highway driving conditions.
- EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
- MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.63-1007-1)
from
$367.99
The K&N AirCharger 63-1007-1 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1007-1 air intake places a round K&N high-flow air filter directly on top of the throttle body allowing large volumes of air to be pulled into the engine delivering a guaranteed gain in horse power. The oversized air filter is capped with an impressive chrome lid for added visual appeal under the hood. This air intake is relatively easy to install using commonly available tools. Not legal for sale or use in California on any pollution controlled motor vehicle.
Product Features:
See More
Product Features:
- Guaranteed horsepower gain
- Designed to improve throttle response and engine sound
- Free-flowing high density polyethylene tube
- Replaces entire factory air intake system
- K&N No-Hassle Lifetime Limited Warranty
- Easy to install, usually in 60 minutes or less
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – MotorMt (Part No.3.1152R)
from
$52.99
MotorMt
Energy Suspension – MotorMt (Part No.3.1152G)
from
$52.99
MotorMt
Energy Suspension – Transmission Mount (Part No.3.1129G)
from
$97.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Upgrade your 2013 GMC Yukon with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2013 GMC Yukon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Yukon functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Performance and Racing Products for the 2013 GMC Yukon, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Steering Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2013 GMC Yukon at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $1,870.00, with
an average price of $463.90.
Our 52 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 2013 GMC Yukon without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 GMC Yukon, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Airaid, Spectre, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
Airaid and Spectre also bring quality to the table, with Performance and Racing Products available starting at $42.49, and at an average 4.2 stars rating.
With 1,503 customer reviews and counting, our 2013 GMC Yukon Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 GMC Yukon is always ready to roll. We’re committed to providing you with everything you need to keep your Yukon in top shape, all in one place.
Start shopping confidently below for your 2013 GMC Yukon!
Best-Selling Performance Oil Filters for 2013 GMC Yukons
Enhance the driving experience in your GMC with 1 quality Performance Oil Filter components, starting at $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Most Popular 2013 GMC Yukon Performance Steering Products
Customize your GMC with 1 Performance Steering Products products
like Performance Body Mounts, all
priced under $369.99.
Energy Suspension – BodyMntBshKt (Part No.3.4156G)
from
$369.99
BodyMntBshKt
Top Picks for 2013 GMC Yukon Performance Engines
Upgrade GMC Yukons with top-quality Performance Engines parts, including 18 OEM and aftermarket selections for your 2013 model.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
- 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
- Use Dual Valve Spring part No. 26925-16 with this camshaft
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)
from
$1870.00
XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-426-11)
from
$1867.00
XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)
from
$1195.00
XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)
from
$1195.00
XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – ENGINE VALVE LIFTER (Part No.15850-16)
from
$868.99
ENGINE VALVE LIFTER
Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)
from
$805.99
Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV
Competition Cams – LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-454-11)
from
$805.99
LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)
from
$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
- 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26915-16 with this camshaft
Competition Cams – ENGINE ROCKER ARM (Part No.19024-1)
from
$72.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1675-1)
from
$62.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1676-1)
from
$62.99
ENGINE ROCKER ARM
Competition Cams – Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (Part No.4856-1)
from
$8.99
Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud
Competition Cams – Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (Part No.4854-1)
from
$8.99
Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud
In-Demand Performance Air Filters for 2013 GMC Yukons
Select from 2 premium Performance Air Filters parts for your 2013 GMC Yukon, with prices ranging from $42.49 to $68.99.
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2135)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Spectre – Spectre Replacement Air Filter (Part No.HPR8755)
from
$42.49
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Chevy and GM truck applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
Most Sold 2013 GMC Yukon Performance Exhaust Products
Explore our best-selling GMC parts for the 2013 Yukon among 2 OEM and aftermarket options starting from $152.99.
Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953047)
from
$152.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.853072)
from
$255.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Recommended for SUV/trucks/motorhomes/tow vehicles
- Improved horsepower, torque and potential mileage improvement
- Race proven patented Delta Flow technology
Top-Rated Performance and Racing Products Brands For Your 2013 GMC Yukon
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2013 GMC Yukons. Below you’ll find some of our best rated Performance and Racing Products from K&N, Airaid, and Spectre, and more. Performance and Racing Products from these brands that fit a 2013 Yukon start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2013 GMC Yukon Performance and Racing Products
When it comes to maintaining or upgrading your 2013 GMC Yukon, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2013 GMC Yukon. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $186.66. Plus, with over 238 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$472.99
(16)
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
“Love the product! The 77 series is the first K&N product I’ve purchased. Gives off a really nice sound. Looks awesome. Diffidently more power and fuel”
from
$68.99
(89)
Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance
“5 Star Review”
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“Joe Biden needs to be in an old age home
Epstein didn’t kill himself.”
Popular Airaid 2013 GMC Yukon Performance and Racing Products
Airaid auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2013 GMC Yukon owner should feel confident when installing genuine Airaid parts in their vehicle. To ensure the best fit and performance for your 2013 Yukon, Advance Auto Parts carries a full inventory of 2 Airaid Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these Airaid Performance and Racing Products range up to $262.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$262.99
(2)
Junior Air Intake System
“Received quickly…easy install, easy to follow directions. I Recommend wiping off the factory oil film from the rubber and plastic parts before asse”
from
$262.99
(1)
Junior Air Intake System
“This is the best way to go for a cold air intake style kit, it keeps the factory air inlet location so you don’t have to worry about too much water or”
FAQs for 2013 GMC Yukon Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2013 GMC Yukons?
Out of 52 Performance and Racing Products that fit 2013 GMC Yukons, the following parts are the top sellers:
- Spectre Replacement Air Filter (10162656) – $42.49
- Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
- Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (20290686) – $152.99
What’s the price range for 2013 GMC Yukon Performance and Racing Products?
Performance and Racing Product prices for the 2013 GMC Yukon start at $8.99 and go up to $1,870.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2013 GMC Yukon?
The average price for Performance and Racing Products for the 2013 GMC Yukon is $463.90. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC Yukon model years?
What are the cheapest Performance and Racing Products for my 2013 GMC Yukon?
The cheapest 2013 GMC Yukon Performance and Racing Products we carry in stock are:
- Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (50288908) – $8.99
- Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (50288903) – $8.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16400033) – $17.99
- Spectre Replacement Air Filter (10162656) – $42.49
- ENGINE ROCKER ARM (50272408) – $62.99
What are the top-rated Performance and Racing Products that fit the 2013 GMC Yukon?
Out of 1,503 reviews by customers, our 2013 GMC Yukon Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2013 GMC Yukon and their top-rated products:
- Performance Air Filters
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (17400081) – $68.99
- Spectre Replacement Air Filter (10162656) – $42.49
- Performance Air Intake Kits
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (17400081) – $68.99
- Spectre Replacement Air Filter (10162656) – $42.49
- Performance Oil Filters
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (17400081) – $68.99
- Spectre Replacement Air Filter (10162656) – $42.49
What types of Performance and Racing Products do you sell for my 2013 GMC Yukon?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2013 GMC Yukon:
Can I get help with 2013 GMC Yukon Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC Yukon Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC Yukon Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
