2013 Ford F-250 Super Duty Exhaust System Kits

This Mach FORCE Xp exhaust system is constructed of 5″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style hangers provide stability and for an easy installation. Finishing off the exhaust is a black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Constructed Of Mandrel Bent Stainless Steel
• Increased Flow And Performance
• High Quality Band Clamps
• OE Style Bayonet Hangers

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19351 brings out the personality of your 6.2L 2017-2022 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19351 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19351 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Rugged and dependable our XP series is made of T409 stainless steel. It designed and built to stand up to the harshest road condition. We are so sure that our XP series has what it take that we have given it an amazing lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundred of test Mile and hundred of Hour are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angle And Smooth Mandrel Bend Mean That Exhaust Gas Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperature
• Vehicle Maintain Optimal Operating Temperature
• Fit Right The First Time. Rigorous Testing Procedure Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configuration Of The Same Vehicle As Possible
• Designed And Built To Stand Up To The Harshest Road Condition
• Constructed From T409 Stainless Steel
• Easy, Bolt On Design, Make Easy To Install
• Limited Lifetime Warranty

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Force II systems deliver a moderate exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 3.5 in. Mandrel Bend 409 Stainless Steel Tubing
• 34% Flow Gain
• Free Flow Muffler
• OE Style/Welded-On Hangers

Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Al l aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Polished Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

This Mach FORCE Xp exhaust system is constructed of 5″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style hangers provide stability and for an easy installation. Finishing off the exhaust is a black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Constructed Of Mandrel Bent Stainless Steel
• Increased Flow And Performance
• High Quality Band Clamps
• OE Style Bayonet Hangers

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19174 brings out the personality of your 6.2L 2011-2016 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19174 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19174 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Interested in a new exhaust system for your 6.7 L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included is a massive 7 in. wrinkle-black powder-coated 304 stainless steel tip with laser-cut stainless steel aFe power badge. The tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is rived on for an aggressive style. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp/OE Style Bayonet Hangers For Secure Fit
• Utilizes All Factory Mounting Locations
• Quick Hassle Free Installation

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Lower EGTs

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel – a value-oriented material that will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you are looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you Do not find yourself faced with lots of precipitation and salt, this is all you are ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

Product Features:

• Rugged 16 Gauge T409 Construction
• More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Pickup
• Stamped Logo On The Tip And Unmistakable Styling
• Bolt-On, No Weld Design Makes Installation A No Hassle One

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to.

Product Features:

• Black Series Diesel Particulate Filter (DPF) Back System
• Built To Perform With More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Drops Exhaust Gas Temperature By Up To 200 Degree Fahrenheit And Minimizes Backpressure
• From The Spiral Louvered High Flow Muffler To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Gets Exhaust Out Fast
• Specifically Tuned To Get The Optimal Sound From Pickup
• New Stamped Logo On The Tip And Unmistakable Styling
• Everything Is Direct Fit To The OEM Hangers
• Bolt-On, No Weld Design Makes Installation A No Hassle, One And A Half To Two Hour Project

aFe’s Rebel XD Series DPF-back exhaust system performs as good as it looks. Made with 4″ mandrel bent 409 stainless steel tubing to improve exhaust flow for more HP, torque and lower EGT’s. The Rebel XD is MIG welded for durability and includes high quality hardware to provide a quick, hassle-free installation. Finished with dual 5″ black stainless steel tips with intercooling vents make it the perfect combination of performance, value and style.

Product Features:

• MIG Welded
• Factory Mounting Locations
• High Quality Band Clamps

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound.

Product Features:

• Exhaust System Kit Turbo Back System
• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• DPF/CAT-Delete
• No Bungs
• Bayonet OE Style/Welded-On Hangers

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, single wall slash cut tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

Flow and Performance: This ATLAS exhaust system is 100% hand MIG-welded and Constructed from 4″ mandrel-bent aluminized steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow. Perfect Fit: This system uses all factory mounting locations providing stability. Includes OE-style bayonet hangers which are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Some cutting maybe required during install. Please see instruction sheet for Cab configuration for further details. 5″ Angle-Cut Rolled Edge Polished Intercooled Clamp-On Tips: Finishing off the exhaust are dual side exit 5″ stainless steel intercooled clamp-on tips with a polished finish. A unique laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• Dual Side Exit
• Matte-Black Stainless Steel Clamp-On Tips
• Tips w/Laser-Cut Stainless Steel aFe Power Plate