2013 Ford F-150 Drivetrains
More 2013 Ford F-150 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2013 Ford F-150, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2013 Ford F-150 Drivetrains
National – Multi Purpose Seal (Part No.4278)
from
$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford (And IFS) With 28 Spline Axles (Part No.16019)
from
$285.99
Yukon standard open spider gear kit for 8.8″ Ford (and IFS) with 28 spline axles and 3/4″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 8.8″ open differential with 28 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Differential Pinion (Part No.13115)
from
$279.99
Differential Pinion
EVO Driveline – Transfer Case Assembly (Part No.UMT420-8)
from
$1129.99
Transfer Case Assembly
Yukon Gear – Pinion Gear Thruster Washer For 10.25" Ford (Part No.33294)
from
$9.99
Pinion gear thruster washer for 10.25″ Ford.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Ford 10.25″
Carquest Premium – 4WD Switch (Part No.FWC1125)
from
$132.99
4WD Switch
Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)
Motive Gear – Differential Pinion Shim Kit (Part No.WAA4663)
from
$15.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Dorman – OE Solutions Axle Shaft Kit (Part No.K4005829854DOR)
from
$257.26
Dorman’s Axle Shaft comes as a complete kit. Packaged with all the installation hardware essential for a complete repair, it provides time-saving convenience at an affordable price.
Product Features:
See More
Product Features:
- Comes assembled with U-Joints installed
- Direct replacement for a proper fit every time
- Durable steel construction for long-lasting performance
- Vehicle try-on testing has been conducted on this part to ensure trouble-free performance
National – Bearings (Part No.HM89411)
from
$24.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motorcraft – 4WD Actuator Valve (Part No.J7603674059MTR)
from
$70.41
4WD Actuator Valve
Dorman – Independent Wheel End Coupler (Vacuum Delete Kit) (Part No.600-405)
from
$179.99
The internal diaphragm on vacuum-activated hub actuators is prone to failure on certain 4WD vehicles. This replacement hub locking actuator restores 4WD and ensures greater reliability by eliminating that problematic vacuum function.
Product Features:
See More
Product Features:
- Dependable solution – this unique hub locking actuator delete enables 4WD operation while disabling the failure-prone original vacuum function
- Cost-effective fix – deleting need for troublesome vacuum saves future replacement cost and frustration
- Patented design – exclusively engineered in the United States by highly trained automotive experts
- Fully reversible – actuator includes vacuum caps for holding remnant lines and allow for restoring original function in future
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 9" Ford (Part No.32235)
from
$51.99
Chrome Moly cross pin shaft for Mini-Spool for 9″ Ford HD.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Ford 9″
- Chromoly steel for added strength
Yukon Gear – 8.8" Ford Low Profile Ta HD Aluminum Rear Cover (Part No.32114)
from
$399.99
8.8″ Ford low profile TA HD Aluminum rear Cover. This cover will not fit vehicles with independent rear suspension.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- Aluminum girdle cover
Yukon Gear – Standard Open Case For Ford 9.75" (Part No.20132)
from
$345.99
Standard Open case for Ford 9.75″. This is a bare case and does not come with any internal components. This part carries a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Ford 9.75″
- Does not include spider gears
Spartan – Drive Axle Assembly; Ford F-150 09-11 10-Blt Axle (Part No.RAX0210C)
from
$1535.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.
Product Features:
See More
Product Features:
- Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
- Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
- Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
- Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
National – Bearings (Part No.FC-66998)
from
$10.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Outer Axle Seal For Set 20 Bearing (Part No.30030)
from
$14.99
Outside seal (included in TK set20).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Works with Set20 bearing
Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)
from
$139.99
Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction
Neapco – Universal Joint (Part No.2-0053)
Cardone – Transfer Case Motor (Part No.48-216)
from
$170.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)
from
$118.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
- Includes axle bearing and seal
- Services one side
Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-507)
from
$48.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Timken – Axle Seal (Part No.K40211175455TIM)
from
$21.06
Timken understands how important seals are in the automotive industry. Leveraging our knowledge and experience with bearings, we offer a broad line of light-duty oil seals made exclusively for Timken in some of the world’s most advanced manufacturing plants.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Yukon Gear – 9.75" Ford C-Clip (Part No.33248)
Yukon Gear – Zip Locker Rear Switch Cover (Part No.34010)
Popular 2013 Ford F-150 Drivetrains Categories
2013 Ford F-150 Drivetrains
You count on your 2013 Ford F-150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 350 Drivetrains ranging in price from $1.99 to $3,034.99, you’re sure to find everything you need for your 2013 Ford F-150.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 26 different brands like Moog, Dorman, and Felpro. 2013 Ford F-150 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 17,814 extensive product reviews on 2013 Ford F-150 Drivetrains. Some of the top-rated Drivetrains products we carry are Solenoid, 4WD Engage And Emissions Purge with 4.1 stars and DIFFERENTIAL GASKET with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Ford F-150 below to get started!
Top-Rated Drivetrains Brands For Your 2013 Ford F-150
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Ford F-150 running right for years to come. In our inventory you’ll find brands like Moog, Dorman, Felpro, and even more.
Popular Tech Smart Drivetrains
You’ll find popular Tech Smart brand products across 4WD Components. All are waiting to get your 2013 Ford F-150 back on the road. Some of the top-rated Tech Smart products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2013 Ford F-150, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2013 Ford F-150 Drivetrains
What are the most purchased Drivetrains for the 2013 Ford F-150?
Out of 350 Drivetrains for the 2013 Ford F-150, the most popular in our inventory are:
What are the top-rated 2013 Ford F-150 Drivetrains?
Top-rated Drivetrains for your 2013 Ford F-150 based on customer reviews/ratings are:
from
$34.99
(34)
Rear Differential Cover
“does not look like this in box, its black powder coated , this view is from the inside . there is a magnet in the diff cover”
