2013 Ford Expedition Suspension Parts

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

• Strut Mount
• Bearing
• Upper Spring Isolator
• Lower Spring Isolator
• Upper Spring Seat

POWER STEERING FLUID

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

An all-in-one solution, Rancho® quickLIFT® loaded assemblies level and lift late model trucks and SUVs. This complete assembly simplifies installation, levels the front suspension and provides additional lift to accommodate larger wheels and tires.

Product Features:

• COMPLETE SOLUTION — Levels and lifts late model trucks and SUVs without the cost of complete suspension system
• EASY BOLT-ON INSTALLATION — Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation
• LEVELS FRONT SUSPENSION — Removes factory rake for an aggressive stance
• INCREASED GROUND CLEARANCE — Provides 1-in. to 2.5-in. of additional lift to accommodate up to 35-in. tires for a custom look and increased ground clearance (tire size varies by manufacturer, bumpers, winches, etc. affect lift height)
• NINE LEVELS OF PERFORMANCE — Includes RS9000®XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility
• BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while long-lasting premium liquid metallic finish ensures long life
• REDUCES FADE — Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Protects spring and spring seat from damage
• Replacement helps to reduce noise
• Includes insulator and bearing

Monroe® Reflex® struts feature ASD valving technology that automatically adjusts to absorb the impact, leaving the strut with greater control when it is needed. Monroe Reflex struts improve overall ride characteristics in all road conditions.

Product Features:

• IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
• EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper helps prevent severe suspension movement (both sold separately)
• LONGER SERVICE LIFE — Bronze reinforced rod guide bearing and special single lip seal combined with hardened, chrome-plated piston rod provides durability and longer service life
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.

Strut Bellow

Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:

• Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
• Durable construction – made of hardened steel to match the function and durability of the original part
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life

Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:

• Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
• Durable construction – made of hardened steel to match the function and durability of the original part
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life

Failed air suspension too costly to repair? This partial air-to-coil spring conversion kit replaces failed rear air springs with conventional steel springs. Cost-effectively restore a smooth ride by only replacing the parts necessary.

Product Features:

• Alternative replacement – this air suspension delete kit replaces the original rear air springs with conventional coil springs
• Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
• Thoroughly tested – parts underwent ride handling testing to ensure performance
• Tech note – includes all necessary hardware and components needed to convert rear suspension; full 4-corner kit required to eliminate warning light

Arnott Number: C-2592 Application: New Coil Spring Conversion Kit for 2007-2012 Navigator/Expedition This new coil spring conversion kit was exclusively designed for the Lincoln Navigator and Ford Expedition. The conversion kit converts the air suspension on the rear of your luxury SUV to a more reliable coil spring/strut combination. These aftermarket springs are designed to maintain the factory-intended trim height of your vehicle. This kit features the highest-quality replacement components including powder-coated US Steel coil springs and custom-tuned struts. To maximize efficiency and safety, Arnott’s coil spring kit is preassembled and ready for easy installation, eliminating the need for the use of a dangerous spring compressor. No special tools are required. This air to steel spring suspension kit also includes Arnott’s new patents pending Electronic Bypass Module (EBM) technology to reliably eliminate dash panel suspension related fault codes. This pioneering technology, exclusively from Arnott, easily connects directly to your Lincoln electronics in a matter of minutes.

Product Features:

• Reliable Coil Spring Suspension
• Includes All Hardware
• Restores Vehicle’s Factory Ride Height
• Includes EBM to turn off Warning Lights
• Detailed Installation Manual
• Pre-Assembled For Trouble-Free Installation Installation Manual: ( )

TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:

• Aluminium forged Control Arms
• Aluminium cast Control Arms – low weight/high performance
• Steel forged Control Arms
• Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
• Temperature resistant
• Low-torque/high comfort solution
• Ball stud diameters ranging from 25 to 42mm
• Integral and non-integral designs Built in Bushes:
• Rubber Bushes
• Rubber and Metal Bushes
• Hydraulic Bushes

TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:

• Aluminium forged Control Arms
• Aluminium cast Control Arms – low weight/high performance
• Steel forged Control Arms
• Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
• Temperature resistant
• Low-torque/high comfort solution
• Ball stud diameters ranging from 25 to 42mm
• Integral and non-integral designs Built in Bushes:
• Rubber Bushes
• Rubber and Metal Bushes
• Hydraulic Bushes

Get premium control and performance with Rancho RS9000®XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on- and off-road use, towing and more.

Product Features:

• NINE LEVELS OF PERFORMANCE — Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES — Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST — Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE — Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE — Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES — Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
• SMOOTH PERFORMANCE — Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures long life

Monroe® Specialty Shock Absorbers are direct fit replacements for vehicles equipped with factory air or electronic suspension. Available for popular passenger car, light truck and SUV applications.

Product Features:

• Direct OE style replacement
• 100% compatible with the factory air or electronic suspension system
• OE style air/electric connectors
• Available for most popular applications
• Restores your vehicle factory ride height and provides a stable comfortable ride

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
• Increased durability – brass construction prevents future failures from original brittle plastic design
• Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

• Direct replacement – this suspension trailing arm fits and functions like the original equipment part
• Quality construction – manufactured from same materials as original equipment for safety and reliability
• Durable – protective finish for long-lasting corrosion resistance
• Quality tested – has undergone testing to ensure proper fit and performance

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
• Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
• Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

• Air Bellow Produced For Suncore By Goodyear
• Lifetime Warranty
• Includes O-Rings
• Includes Instructions

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Pivot for the steering mechanism, providing a smooth steering response
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:

• Engineered to meet or exceed OE requirements
• Superior rubber to steel bonding for durability
• High polish chrome steel bearing races
• Replacement helps restore vehicle handling
• Includes new spring seat insulator and installation hardware to eliminate noise issues
• Electroplate and corrosion-resistant coating to help prevent galvanic corrosion

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

• Strut Mount
• Bearing
• Upper Spring Isolator
• Lower Spring Isolator
• Upper Spring Seat