2013 Ford E-250 Towing Products

Essential 2013 Ford E-250 Towing Products

CURT – Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 35 Mins (Part No.14055)

Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 35 Mins

from

$379.99
Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Ford E150, E250 and E350 Super Duty (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:
  • Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
  • Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)

Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CURT – Brake Controller Harness, Select Ford F-Series, E-Series, Expedition, Navigator (Part No.51432)

Brake Controller Harness, Select Ford F-Series, E-Series, Expedition, Navigator

from

$19.49
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford E150, E250, E350 Super Duty, E450 Super Duty, Expedition, F250 Super Duty, F350 Super Duty, F450 Super Duty, F550 Super Duty and Lincoln Navigator (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

CURT – Trailer Brake Controller Harness (Part No.51322)

Trailer Brake Controller Harness

from

$11.49
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

Husky Towing – Compatible With Controllers With A Connector, Direct Plug-In, 2 Plug Style, 36"L (Part No.31863)

Compatible With Controllers With A Connector, Direct Plug-In, 2 Plug Style, 36"L

from

$21.99
Husky custom wiring harnesses fits all Husky brake controls that have a similar shaped plug. Simply attach the adapter to the Husky brake control. The safest or easiest way to wire a brake control to your tow-prepped vehicle.

Product Features:
  • The Safest Or Easiest Way To Wire A Brake Control To Your Tow-Prepped Vehicle
  • Simply Attach The Adapter To The Brake Control
  • Constructed with durable, quality materials, and is rigorously tested to industry safety standards
  • Easy to install
See More

Husky Towing – Compatible With Controllers With A Connector, 2 Plug (Part No.31860)

Compatible With Controllers With A Connector, 2 Plug

from

$18.99
Husky custom wiring harnesses fits all Husky brake controls that have a similar shaped plug. Simply attach the adapter to the Husky brake control. The safest or easiest way to wire a brake control to your tow-prepped vehicle.

Product Features:
  • The Safest Or Easiest Way To Wire A Brake Control To Your Tow-Prepped Vehicle
  • Simply Attach The Adapter To The Brake Control
  • Constructed with durable, quality materials, and is rigorously tested to industry safety standards
  • Easy to install
See More

Husky Towing – Class Iii, Round Tube, 2"Receiver, 6000Lb Weight Carrying/ 600Lb Tongue Weight (Part No.69498C)

Class Iii, Round Tube, 2"Receiver, 6000Lb Weight Carrying/ 600Lb Tongue Weight

from

$319.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
See More

CURT – Front Mount Hitch with 2in. Receiver (Part No.33055)

Front Mount Hitch with 2in. Receiver

from

$271.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Engineered with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 35 Mins (Part No.13055)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 35 Mins

from

$229.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline and E350 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (8,000 lbs. WD / 800 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Dorman – Trailer Hitch Connector (Part No.924-611)

Trailer Hitch Connector

from

$81.99
This trailer tow harness connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this trailer tow harness connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Multi Purpose Connector (Part No.PTA2944)

Multi Purpose Connector

from

$61.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Hopkins – 47284, Reliance Plug-In Simple!® Trailer Brake Control (Part No.47284)

47284, Reliance Plug-In Simple!® Trailer Brake Control

from

$78.99
The 47284 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to the trailer can easily be adjusted from 5% to 99% for setting the exact percentage of brake power desired. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Time-based braking
  • Mounts at any angle
  • Percentage of braking power shown
  • Plug In Simple Feature
  • Intuitive vertical manual slide
  • Short Proof Protected
  • Controls up to 4 trailer brakes
See More

Hopkins – 47297, InSIGHT Plug In Simple!® Trailer Brake Control (Part No.47297)

47297, InSIGHT Plug In Simple!® Trailer Brake Control

from

$124.99
New trucks are becoming more car-like every year making it almost impossible to install a traditional brake controller. With the InSIGHT brake control, you gain the flexibility needed to make a simple, no tools required installation in any vehicle. This three part system allows the driver to bring the display back in sight where they can see what is going on as well as bringing the controls within a comfortable reach whether you are right or left handed. Mount the brain of the system out of sight. So, no more banging your knee every time you get in and out of your vehicle. This proportional brake controller creates stops that are safe and smooth, making you feel like you aren’t even towing a trailer! With easy to set gain adjustments and a digital display will make setting this brake control quick and easy. Seven On-the-fly sensitivity settings allows you to adjust for trailer weights and weather at the press of a button. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Proportional braking
  • No Tools Required Installation, no drilling required
  • Percentage of braking power shown
  • 7 Sensitivity Settings for Advanced Braking Control
  • Intuitive vertical manual slide
  • Short Proof Protected
  • Controls up to 8 trailer brakes
See More

Hopkins – Premium Brake Controller with Smart LED Display (Part No.47225)

Premium Brake Controller with Smart LED Display

from

$73.99
The 47225 brake control utilizes time based actuation for applying braking power to the trailer brakes. An LED indicator will glow displaying braking intensity. The brighter the glow, the more braking force is being applied to the trailer brakes. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Smart LED Display Shows Trailer Connection
  • Braking Function/Short circuit Notification
  • Changes Green To Yellow As Power Increases
  • Plug In Simple Feature
  • Intuitive vertical manual slide
  • Short Proof Protected
  • Controls up to 4 trailer brakes
See More

CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)

Dual-Output 6/4-Way Connector (Plugs into USCAR)

from

$46.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 6-way round socket adds connection for electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

Hopkins – Plug-and-Play Towing Wiring Kit with OEM Connectors (Part No.41155)

Plug-and-Play Towing Wiring Kit with OEM Connectors

from

$25.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins? vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple? Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

Husky Towing – 4-Way Flat And 7 Rav, With Dust Cover/ Cable Ties And Grease Packet (Part No.13092)

4-Way Flat And 7 Rav, With Dust Cover/ Cable Ties And Grease Packet

from

$51.99
Husky Towing Products offers a complete line of hitches, brake assemblies, jacks, sway control solutions, and essential towing accessories. Each Husky product is precision engineered, constructed with durable, quality materials, and is rigorously tested to industry safety standards. Hitches are what Husky does best. From Class III receivers, to 5th wheels, to weight distribution hitches, Husky hitches help keep your towables safe and secure. Husky also offers accessories to accompany your hitch including hitch balls, shanks, locks, and more Electric tongue jacks, electrical and brake products, and cargo carriers are just a few other categories that make any towing experience easier.

Product Features:
  • Husky Branded Replacement Parts Ensure Proper Fit And Function
  • Weatherproof Design
  • Constructed with durable, quality materials, and is rigorously tested to industry safety standards
  • Easy to install
See More

CURT – Replacement USCAR Socket with 24in. Wires (Vehicle Side) (Part No.56229)

Replacement USCAR Socket with 24in. Wires (Vehicle Side)

from

$24.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24″ of bonded wire for easy splicing into your vehicle’s wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Replaces damaged or missing USCAR vehicle harness
  • Includes 24″ color-coded, bonded wires for easy installation
See More

CURT – Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55416)

Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer wiring connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:
  • Weather-resistant dust cover features a rubber insert to seal out moisture
  • Spring-loaded cover also helps keep connector clean when not in use
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
See More

CURT – Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55415)

Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
See More

CURT – Front Mount Hitch with 2in. Receiver (Part No.31053)

Front Mount Hitch with 2in. Receiver

from

$229.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford E150, E250 and E350 Super Duty (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Made with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
See More

K-Source – Towing Mirror Assembly: Both Sides, Manual Adjustment, Foldable, 2 Pk (Part No.61201-02F)

Towing Mirror Assembly: Both Sides, Manual Adjustment, Foldable, 2 Pk

from

$249.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror Set. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver and passenger side Mirrors are included in the set, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass to be adjusted by hand
  • Manual folding for additional clearance
  • Textured Black
  • Superior material and manufacturing process ensures the highest quality possible
See More

K-Source – Towing Mirror Assembly: Both Sides, Power Adjustment, Foldable, 2 Pk (Part No.61199-00F)

Towing Mirror Assembly: Both Sides, Power Adjustment, Foldable, 2 Pk

from

$347.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror Set. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver and passenger side Mirrors are included in the set, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black
See More

K-Source – Towing Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk (Part No.61204F)

Towing Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk

from

$172.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black
See More

K-Source – Towing Mirror Assembly: Both Sides, Power Adjustment, Foldable, 2 Pk (Part No.61203-04F)

Towing Mirror Assembly: Both Sides, Power Adjustment, Foldable, 2 Pk

from

$331.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror Set. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver and passenger side Mirrors are included in the set, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black
See More

K-Source – Towing Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk (Part No.61203F)

Towing Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk

from

$176.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black
See More

K-Source – Towing Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk (Part No.61199F)

Towing Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk

from

$208.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black
See More

2013 Ford E-250 Towing Products

You count on your 2013 Ford E-250 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 31 Towing Products ranging in price from $18.29 to $379.99, you’re sure to find everything you need for your 2013 Ford E-250.

Brands matter. If you want to shop a specific Towing Products brand, we stock 7 different brands like Hopkins, CURT, and K-Source. 2013 Ford E-250 Towing Products start as low as $18.29!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 244 extensive product reviews on 2013 Ford E-250 Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 2013 Ford E-250 below to get started!

Top-Rated Towing Products Brands For Your 2013 Ford E-250

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Ford E-250 running right for years to come. In our inventory you’ll find brands like Hopkins, CURT, K-Source, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Brake Control Parts. All are waiting to get your 2013 Ford E-250 back on the road. Some of the top-rated Hopkins products in these categories are:
47284, Reliance Plug-In Simple!® Trailer Brake Control
from $78.99
(19)
47284, Reliance Plug-In Simple!® Trailer Brake Control
Trailer Brake Controls
Premium Brake Controller with Smart LED Display
from $73.99
(20)
Premium Brake Controller with Smart LED Display
Trailer Brake Controls
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
from $39.99
(20)
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
Trailer Wiring Harness

FAQs for 2013 Ford E-250 Towing Products

What are the most purchased Towing Products for the 2013 Ford E-250?

Out of 31 Towing Products for the 2013 Ford E-250, the most popular in our inventory are:
47297, InSIGHT Plug In Simple!® Trailer Brake Control
from $124.99
This product is not rated
47297, InSIGHT Plug In Simple!® Trailer Brake Control
Trailer Brake Controls
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 35 Mins
from $229.99
This product is not rated
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 35 Mins
Trailer Hitch-Class III/IV
Plug-and-Play Towing Wiring Kit with OEM Connectors
from $25.99
This product is not rated
Plug-and-Play Towing Wiring Kit with OEM Connectors
Trailer Wiring Harness