2013 BMW 750i Cooling and Climate Controls
More 2013 BMW 750i Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2013 BMW 750i, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2013 BMW 750i Cooling and Climate Controls
Bosch – Bosch ABS Speed Sensor (Part No.N6030835368BOS)
from
$63.63
The Bosch OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.
Product Features:
See More
Product Features:
- OE quality direct fit application
- Manufactured to meet or exceed OE requirements and testing
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
Carquest Premium – Blower Motor: With Wheel (Part No.75033)
from
$188.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
KAI – A/C System Seal Kit (Part No.FTT010073)
from
$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine
Product Features:
See More
Product Features:
- MT2640, L4 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Behr – Expansion Tank Cap (Part No.G1040458946BEH)
from
$23.33
The Behr Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – New Auxiliary Water Pump (Part No.T1325)
from
$153.99
This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.
Product Features:
See More
Product Features:
- Electric water pump
- Specialized for vehicles using supplemented cooling for the engine or components
- Plastic housing
- All components necessary for installation are supplied with pump
- Follow all enclosed instructions to maximize pump life and validate warranty
Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85956)
from
$85.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable
- Coated with corrosion and rust inhibitor
- 100% leak tested
- All-in-one bolt on solution for a complete repair
- Includes quality thermostat
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26772)
from
$27.49
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1316)
from
$182.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Behr – A/C Evaporator (Part No.R1130835485BEH)
from
$605.25
A/C Evaporator
Rein – Cap-Expansion Tank (Part No.CPE0030P)
from
$18.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Rein – Air Conditioning O-Ring (Part No.R1150274107RIN)
from
$1.55
Air Conditioning O-Ring
Bosch – Heater Valve (Part No.R3020313597BOS)
from
$192.36
Heater Valve
Behr – Blower Motor Regulat (Part No.R2041655779BEH)
from
$156.57
Blower Motor Regulat
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Elring – Water Pump Gasket (Part No.G3040314647ELR)
from
$14.84
Water Pump Gasket
Behr – Radiator (Part No.G1000388233BEH)
from
$451.55
Radiator
Rein – Water Pump- Plastic Impeller (Part No.WPR0010)
from
$159.99
Rein Automotive OE quality water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or o-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.
Product Features:
See More
Product Features:
- Pump is produced with silicon carbide seals providing improved durability and service life
- Pump uses OE designed bearings by ensuring to extend pumps service life
- Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty
Factory Air – Cap and Valve A/C System Seal Kit (Part No.26826)
from
$19.99
All the seals needed to complete the job; Compatible with both R134a And R12 refrigerants; Application specific; SUV And rear air applications
See More
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39445)
from
$15.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
MAHLE Original – Thermostat Housing Seal (Part No.C32504)
from
$3.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
NTK – Engine Coolant Temperature Sensor (Part No.EF0086)
from
$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)
from
$34.68
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Vaico – Water Pipe (Part No.G2025385025VCO)
from
$62.48
Water Pipe
Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)
from
$29.54
A/C Pressure Switch
KAI – A/C Condenser (Part No.CND3872)
from
$103.99
New Platinum Pro A/C Condenser, 4.4/6.0 Liter Engines With Automatic Transmission
Product Features:
See More
Product Features:
- 4.4/6.0 Liter Engines With Automatic Transmission, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
DENSO – First Time Fit A/C Conr (Part No.R1030273085ND)
from
$221.56
Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.
Product Features:
See More
Product Features:
- Zinc diffusion layer improves corrosion resistance
- Unique fin design to minimize airflow blockage
- High performance design reduces the required compressor power
- System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
- Engineered to Perfection: OE quality engineered for unparalleled performance
- Exact Fit: Condensers install with speed and ease
- Reduces required compressor power, resulting improved fuel economy
- Restores A/C performance to as-new condition
- First Time Fit® assures bolt-in replacement; no brackets or adapters
- Greater Durability: Pure aluminum construction provides greater resistance for corrosion
Popular 2013 BMW 750i Cooling and Climate Controls Categories
2013 BMW 750i Cooling and Climate Controls
You count on your 2013 BMW 750i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 75 Cooling and Climate Controls ranging in price from $1.55 to $1,543.99, you’re sure to find everything you need for your 2013 BMW 750i.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 25 different brands like Permatex, Imperial, and Motorad. 2013 BMW 750i Cooling and Climate Controls start as low as $1.55!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 491 extensive product reviews on 2013 BMW 750i Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Thermostatic Fan Control – Preset with 3.0 stars and Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees with 5.0 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2013 BMW 750i below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2013 BMW 750i
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 BMW 750i running right for years to come. In our inventory you’ll find brands like Permatex, Imperial, Motorad, and even more.
Popular MAHLE Original Cooling and Climate Controls
You’ll find popular MAHLE Original brand products across Engine Cooling Parts. All are waiting to get your 2013 BMW 750i back on the road. Some of the top-rated MAHLE Original products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2013 BMW 750i, and some of our most reviewed Permatex parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
FAQs for 2013 BMW 750i Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2013 BMW 750i?
Out of 75 Cooling and Climate Controls for the 2013 BMW 750i, the most popular in our inventory are:
What are the top-rated 2013 BMW 750i Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 2013 BMW 750i based on customer reviews/ratings are:
from
$38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
from
$84.99
(2)
Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees
“Hard to find this product in the area and with $15 online discount. Glad they had it in stock. Also, free delivery to my house.”
