2013 BMW 550i GT xDrive Engine Cooling Parts

Essential 2013 BMW 550i GT xDrive Engine Cooling Parts

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)

Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees

from

$84.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Behr – Expansion Tank (Part No.G1030377394BEH)

Expansion Tank

from

$132.57
The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Geba – Geba Water Pump (Part No.G3000458067GEB)

Geba Water Pump

from

$214.31
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)

Engine Cooling Auxiliary Thermo-Fan Switch

from

$34.68
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1038)

Coolant Temperature Sensor with O-Ring

from

$26.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Rein – Water Pump Plug (Part No.G3015151330RIN)

Water Pump Plug

from

$14.08
Water Pump Plug

Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85956)

Engine Coolant Integrated Thermostat Housing

from

$85.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring  to ensure proper seal (where applicable
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • All-in-one bolt on solution for a complete repair
  • Includes quality thermostat
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.41-77548-00)

Engine Coolant Thermostat Housing Gasket

from

$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

MAHLE Original – Thermostat Housing Seal (Part No.C32504)

Thermostat Housing Seal

from

$3.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Rein – Cooling Hose (Part No.G2021377415RIN)

Cooling Hose

from

$54.66
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Molded Radiator Hose (Part No.G2000377418RIN)

Molded Radiator Hose

from

$48.39
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Coolant Level Sensor

from

$25.60
Coolant Level Sensor

Carquest Premium – Engine Electric Water Pump: New, Plastic Housing (Part No.T1630)

Engine Electric Water Pump: New, Plastic Housing

from

$85.99
Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Pierburg – Pierburg Auxiliary Water Pump (Part No.G3050335584APG)

Pierburg Auxiliary Water Pump

from

$338.97
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Carquest Premium – Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T65)

Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$30.49
Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

Rein – Cap-Expansion Tank (Part No.CPE0030P)

Cap-Expansion Tank

from

$18.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Nissens – Radiator (Part No.G1000838349NSS)

Radiator

from

$625.16
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
  • Compact and lightweight.
See More

Behr – Radiator (Part No.G1000388233BEH)

Radiator

from

$451.55
Radiator

Carquest Premium – Radiator (Part No.4113475)

Radiator

from

$299.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

2013 BMW 550i GT xDrive Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2013 BMW 550i GT xDrive. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 46 different Engine Cooling Parts in our inventory ranging from $2.99 to $867.33. That means you can find the exact parts or products you need to keep that 2013 BMW 550i GT xDrive running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 2013 BMW 550i GT xDrive. Permatex, Imperial, and Motorad are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2013 BMW 550i GT xDrive, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 491 reviews in this category, some of the top rated parts include Thermostatic Fan Control – Preset with 3.0 stars and Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees with 5.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2013 BMW 550i GT xDrive rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2013 BMW 550i GT xDrive Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 BMW 550i GT xDrive demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 550i GT xDrive the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular MAHLE Original Engine Cooling Parts

We carry MAHLE Original parts in our stock across Thermostat Housing Gaskets categories, plus more. For a 2013 BMW 550i GT xDrive, our most popular MAHLE Original Engine Cooling Parts include:
Thermostat Housing Seal
from $3.49
(3)
Thermostat Housing Seal
Thermostat Housing Gaskets

Top 2013 BMW 550i GT xDrive Engine Cooling Parts from Permatex

Permatex products are another trusted brand when it comes to Engine Cooling Parts for your 2013 BMW 550i GT xDrive. Popular Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2013 BMW 550i GT xDrive Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2013 BMW 550i GT xDrive?

Out of 46 Engine Cooling Parts for the 2013 BMW 550i GT xDrive, the most popular in our inventory are:
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 14" Diameter
from $99.99
(14)
Electric Fan – 14" Diameter
Engine Cooling Fans

What are the top-rated 2013 BMW 550i GT xDrive Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2013 BMW 550i GT xDrive based on customer reviews/ratings are:
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees
from $84.99
(2)
Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees
“Hard to find this product in the area and with $15 online discount. Glad they had it in stock. Also, free delivery to my house.”
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
“Easy as could be to use”