2012 Toyota Tundra Bodies and Fender Parts

New CAPA Certified Premium Replacement Front Bumper Cover Lower Valance, For Use With Resin Or Steel Bumpers

Product Features:

• For Use With Resin Or Steel Bumpers, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Front Lower Valance, Dark Gray Textured Finish

Product Features:

• Dark Gray Textured Finish, Made Of Thermoplastic Polyolefin
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is backed by a Limited Lifetime Warranty. Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Limited Lifetime Warranty
• Made In USA

LUND’s SX-Sport Style fender flares seamlessly add OE style to your Chevy Silverado, Toyota Tundra, GMC Sierra, Dodge Ram or Ford truck. This fender flare style is perfect for those looking for clean line accessories that blend well with their vehicle. The flares’ low profile complements the original design and contours of the wheel well while adding a distinctive style.This durable fender flare, available in two and four-piece sets, is designed to not only add style, but also protect the brilliant coat of paint and the sides of your vehicle from road debris and harsh outdoor elements and weather conditions. LUND SX-Sport Style fender flares are made with Tri-Flex ABS thermoplastic material to allow for maximum strength and flexibility-UV-resistant and built to last; backed by a Limited Lifetime Warranty. Straight from the die, the flare has a smooth (standard) or textured finish that looks great as is, but can also be easily prepped and painted to match your vehicle. Maintenance is easy! You can use any detergent to wash your vehicle to clean the flares as well.

Product Features:

• Bring A Neat And Seamless Style To Your Vehicle
• Perfect Clean Line Accessory
• Blends In Well And Looks Like It Came From The Factory
• Protects Your Vehicle From Road Debris
• Made From Durable OEM-Style ABS Plastic
• Can Be Prepped, Primed And Painted
• Installs Quickly With Included Fasteners
• No Modification Is Necessary
• Covers Rust And Fender Blemishes
• Designed For Perfect Fitment
• UV Resistant From Color Fading
• Limited Lifetime Warranty

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Universal Fitting
• Easy No Drill Installation
• Perfect Compliment Nerf Bars

The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicles Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris

ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Toyota Tundra (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable black powder coat finish

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

• Constructed From High-Quality, Durable, Automotive Grade ABS
• Two Layers Of Clear Coat Enhance And UV Protect The Finish
• Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
• Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
• Mount with 3M Tape

Product Care: Regular vehicle cleaning of dirt, grime or salt twice a month, year round. Appling a high quality wax to help protect and maintain the finish of the product is recommended. Use ONLY Non Abrasive automotive wax. Use of any soap, polish or wax that contains an abrasive is detrimental and can scratch the finish leading to corrosion. Do not use harsh cleaners or chemicals that could damage the finish. Failure to keep your product clean may result in pitting and or peeling.

Product Features:

• Chrome Plated For A Long Lasting Shine
• Designed To Fit Multiple Vehicles
• Easy Installation
• Mount with 3M Tape

The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features:

• Maximize Axle Travel
• Smooth Axle Engagement And Disengagement
• Enhance Suspension Performance
• ProgressiveáSpring Rate
• Absorbs Energy And Cushions Road Shocks
• Stronger Than OEM Bumpstops
• Easy Installation

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

New CAPA Certified Standard Replacement Driver Side Fender Liner, Front Section, SR5 Models

Product Features:

• Front Section, SR5 Models, Made Of High Density Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Liner, Front Section, With Steel Bumper

Product Features:

• Front Section, With Steel Bumper, Made Of Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Liner, Front Section, SR5 Models

Product Features:

• Front Section, SR5 Models, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Fender Liner, Front Section, With Steel Bumper

Product Features:

• Front Section, With Steel Bumper, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves f

Product Features:

• OE Style
• UV Resistant Black Molded Polymer
• Extruded Aluminum Base Board
• Cradle Mounted Boards
• Customized Mounting Brackets Sold Separately
• Adds Perfect Finishing Touch To Vehicle
• 5 Year Warranty

Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made for the truck owner who gets it done, day after day. With their solid, all-steel construction, non-skid treads and tough powder coat finish, RidgeStep running boards are made to finish the job. Installation of these running boards is easy and secure because they use the ARIES VersaTrac mounting system. The underside of each board is equipped with a channel that accepts a set of heavy-duty bracket inserts. The inserts move along the channel to fit your vehicle, and the mounting hardware provides a secure attachment. The boards are made in four base lengths, including 53″, 75″, 85″ and 91″, and they are designed for vehicle-specific application (NOTE: VersaTrac mounting brackets are sold separately; see the application information to determine which brackets and boards fit your vehicle). ARIES RidgeStep running boards are not only made for easier installation, but they are also built to face the harsh elements of the commercial job. They feature high-strength, solid steel construction for a step that can keep up with those steel-toe boots, and they are completely without plastic parts, meaning they will not crack or fade over time. Their stamped, all-steel tread offers a 6-1/2″ wide, non-skid surface that will never wear down no matter how many times you climb in and out of your truck. The end caps are also made from steel and are welded to contour to the body of your vehicle for a professional finish. RidgeStep running boards come with a unique E-coat and textured black powder coat finish to not only withstand rust but also to hide minor scratches and grime. From the cattle ranch of the arid desert plains to the forgotten forest trails of the frozen tundra, the job doesn’t wait for those who lag behind. Rise to the challenge and master the job with ARIES RidgeStep running boards.

Product Features:

• High-strength, all-steel construction with no plastic parts
• Angular design for a tough, no-nonsense look on hardworking trucks
• Stamped steel treads for a non-skid step that will never wear or crack
• Flat profile and 6-1/2″ width provide a comfortable step
• Textured black powder coat easily hides minor scratches and grime
• Dual-layer E-coat and powder coat finish for maximum corrosion resistance
• Welded steel end caps for a durable accent
• VersaTrac mounting system for easy installation and vehicle customization
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Frame Body Mount Bolts
• Drilling Not Required
• 2 Pads On The Bar
• 60 To 180 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 60 To 180 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves f

Product Features:

• OE Style
• UV Resistant Black Molded Polymer
• Extruded Aluminum Base Board
• Cradle Mounted Boards
• Customized Mounting Brackets Sold Separately
• Adds Perfect Finishing Touch To Vehicle
• 5 Year Warranty

SG6 LED Running Boards are designed to be vehicle specific and require a mount kit (sold separately). Kit includes driver and passenger side e-coated steel mount brackets, complete with hardware and installation instruction sheet.

Product Features:

• Black Powder Coat Finish
• E-Coated Steel
• 5 Year Warranty