2016 Toyota Tundra Bodies and Fender Parts

Product Care: Regular vehicle cleaning of dirt, grime or salt twice a month, year round. Appling a high quality wax to help protect and maintain the finish of the product is recommended. Use ONLY Non Abrasive automotive wax. Use of any soap, polish or wax that contains an abrasive is detrimental and can scratch the finish leading to corrosion. Do not use harsh cleaners or chemicals that could damage the finish. Failure to keep your product clean may result in pitting and or peeling.

Product Features:

• Chrome Plated For A Long Lasting Shine
• Designed To Fit Multiple Vehicles
• Easy Installation
• Mount with 3M Tape

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

• Constructed From High-Quality, Durable, Automotive Grade ABS
• Two Layers Of Clear Coat Enhance And UV Protect The Finish
• Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
• Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
• Mount with 3M Tape

New Standard Replacement Passenger Side Fender Extension, Under Headlamp, Paint To Match

Product Features:

• Under Headlamp, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Extension Panel, Under Headlamp, Paint To Match

Product Features:

• Under Headlamp, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Liner, Rear Section

Product Features:

• Rear Section, Made Of High Density Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Liner, Front Section, With Steel Bumper

Product Features:

• Front Section, With Steel Bumper, Made Of Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Classic Diamond Style Design
• Protected By A BriteGard Powder Coat Finish
• Compliment Brite-Tread Running Boards

The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicles Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable black powder coat finish

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

New, Standard Replacement Driver Side Front Fender Bracket

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

New, Standard Replacement Passenger Side Front Fender Bracket

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is backed by a Limited Lifetime Warranty. Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Limited Lifetime Warranty
• Made In USA

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is backed by a Limited Lifetime Warranty. Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Limited Lifetime Warranty
• Made In USA

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is backed by a Limited Lifetime Warranty. Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Limited Lifetime Warranty
• Made In USA

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Toyota Tundra (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Toyota Tundra (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicles contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability; Extra Large Molded Step Pads Provide Slip Resistant Entry Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease; Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Limited 3 Year Warranty

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features:

• Maximize Axle Travel
• Smooth Axle Engagement And Disengagement
• Enhance Suspension Performance
• ProgressiveáSpring Rate
• Absorbs Energy And Cushions Road Shocks
• Stronger Than OEM Bumpstops
• Easy Installation

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you Do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:

• Rugged 12 Gauge Steel Construction Or Heavy Duty Aluminum
• NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Grated Steel Top Provides Unmatched Traction
• Dirt And Water Drain Away To Keep The Board Clear Of Debris
• Made In America’s Heartland ┐ USA

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Stylish Modern Design
• 5 1/2 in. Step Surface Width
• Corrosion Resistant Extruded Aluminum Board
• Injection Molded End Caps
• Slip Resistant Textured Step Surface
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit For End Caps PN[27-60000]

Made from heavy duty 16 gauge steel and mounted with powder coated braces help prevent rust and wear, keeping your boards strong. With the louvers in the boards allows mud, snow, water, and whatever else you step in daily to easily pass through.

Product Features:

• Made From Heavy Duty 16 Gauge Steel
• Allows Water And Debris To Go Through The Board
• 3 Board Lengths Cover Most Full Size Trucks
• Made In USA

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicles contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine Grade Stainless Steel Ensures Maximum Strength And Durability; Extra Large Molded Step Pads Provide Slip Resistant Entry And Exit Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease; Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Limited Lifetime Warranty

Xtremeline / Streamline bars -The new and unique design has the styling appeal of a side bar coupled with easy installation features and strength of a running board. With a 5-inch step these bars have over 50% more step area than regular tube steps. Stylish custom molded end caps add streamline styling, can be painted for a custom finish and seals the step from moisture. Results in an OEM finished look. No Drilling most applications – Heavy-duty mounting brackets mount to existing factory holes. A new innovation in mounting brackets make installing these bars quick & easy and the bar can be positioned forward or back to compliment individual style or bar location needs. Rampage Exclusive: Galvanized Steel – Powder Coat, Weather Seal Brackets, Note: Xtremeline and Streamline Bars may also be installed with other aftermarket flat top installation brackets by using the Rampage Top Clamp Conversion Kit.

Product Features:

• New And Unique Design
• 5 in. Step Pads
• Custom Molded End Caps For Streamline Styling
• Sealed To Prevent Moisture
• No Drill Installation
• Newly Innovated Installation Brackets
• Quick Easy And Reliable Install
• Vehicle Specific Mount Required
• Must Be Purchased Separately