2012 Toyota 4Runner Bodies and Fender Parts
More 2012 Toyota 4Runner Bodies and Fender Parts
Find your specific 2012 Toyota 4Runner original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2012 Toyota 4Runner Bodies and Fender Parts
Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)
from
$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.
Product Features:
See More
Product Features:
- Classic Styling Of Brite-Tread Aluminum
- Front Or Rear Wheel Protection
- Radius Notch Contours To The Fender Well
- Protected By A BriteGard Powder Coat Finish
Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)
from
$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Universal Fitting
- Easy No Drill Installation
- Perfect Compliment Nerf Bars
Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)
from
$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Classic Diamond Style Design
- Protected By A BriteGard Powder Coat Finish
- Compliment Brite-Tread Running Boards
Timbren SES – Rubber Spring, Helper Spring Kit, Frame Mount, 1800Lb Weight, Aeon Hallow Rubber (Part No.ABSTOF)
from
$309.99
The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
Product Features:
See More
Product Features:
- Maximize Axle Travel
- Smooth Axle Engagement And Disengagement
- Enhance Suspension Performance
- ProgressiveáSpring Rate
- Absorbs Energy And Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)
from
$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.
Product Features:
See More
Product Features:
- The Windflector greatly reduces sunroof wind noise and air turbulence
- Prevents the rain from entering the sunroof opening while driving
- Helps reduce heat buildup inside the vehicle
- Available in 5 different sizes for perfect fit
- No drill installation
- Installs quickly and easily with 3M automotive-grade adhesive
Westin – Sure-Grip Running Boards (Part No.27-6120)
from
$485.99
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.
Product Features:
See More
Product Features:
- Vehicle Specific Mount Kit Required; Sold Separately
- Corrosion Resistant Extruded Aluminum Board
- Slip Resistant Textured Step Surface
- Injection Molded Polymer End Caps
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit Available PN[27-6000]
Westin – Sure-Grip Running Boards (Part No.27-6110)
from
$362.99
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.
Product Features:
See More
Product Features:
- Vehicle Specific Mount Kit Required; Sold Separately
- Corrosion Resistant Extruded Aluminum Board
- Slip Resistant Textured Step Surface
- Injection Molded Polymer End Caps
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit Available PN[27-6000]
Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Requires Running Board Mounting Kit (Part No.DZ16201)
from
$424.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black
Product Features:
See More
Product Features:
- Lightweight Aluminum Powder Coated Frame
- Full Length Protective Accent Trim
- Slip Resistant Raised Rubber Grommets On The Step Area
- NRT(TM) Powder Coated Steel Braces
- No Drilling Required
KAI – Fender Liner (Part No.TO1249198)
from
$46.99
New Standard Replacement Passenger Side Fender Liner, Vehicles With 17 Inch Wheels
Product Features:
See More
Product Features:
- Vehicles With 17 Inch Wheels, Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.TO1248159C)
from
$81.99
New CAPA Certified Standard Replacement Driver Side Fender Liner, Trail Models
Product Features:
See More
Product Features:
- Trail Models, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.TO1250102)
from
$12.99
New Standard Replacement Driver Side Fender Liner, 4WD
Product Features:
See More
Product Features:
- 4WD, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.TO1250124C)
from
$74.99
New CAPA Certified Standard Replacement Driver Side Fender Liner/Splash Shield
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.TO1251109C)
from
$58.99
New CAPA Certified Standard Replacement Passenger Side Fender Liner/Splash Shield
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.TO1250103)
from
$11.99
New Standard Replacement Driver Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Westin – Platinum 4 Oval Nerf Step Bars (Part No.21-3585)
from
$303.99
Westins Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4″ wide recessed step area. Platinum 4 Oval Nerf Step Bars ar
Product Features:
See More
Product Features:
- 90 Degree Mandrel Bends
- 4 in. Wide Step Pad
- 4.25 in. Wide At Widest Dimension
- Black Powdercoat E-Coat Mild Steel
- Mount Kit Included
- 3 Year Limited Warranty
Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5055)
from
$275.99
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.
Product Features:
See More
Product Features:
- Vehicle Specific Mounting Kit Required; Sold Separately
- 4 in. Oval Tube
- Injection Molded Polymer Step Pad
- Molded Oval End Caps
- Bolt-On Installation; No Drilling Required
- 3 Year Warranty
Westin – HDX Stainless Drop Nerf Step Bars (Part No.56-138352)
from
$775.99
Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.
Product Features:
See More
Product Features:
- Corrosion Resistant Black Powder-Coated Stainless Steel
- Die Stamped Stainless Steel Step Areas For Maximum Traction
- Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
- Features A Notched Bar Design With Heavy-Duty Step Plate
- Includes Rust Resistant Stainless Steel Step Plates
- Removable Step Plates For Easy Cleaning
- Fits Tight To Rocker Panel
- Solid 1-Piece Construction
- Bolt-On Installation No Drilling Required For Most Applications
- Mount Kit Included
Westin – E-Series 3 Round Nerf Step Bars (Part No.23-3585)
from
$296.99
Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.
Product Features:
See More
Product Features:
- Mount Kit Included
- 3 in. Round Step Bars
- Economical Step-Up Solution
- Vehicle Specific Applications
- Injection Molded Polymer Step Pad
- Recessed Step Area
- Bolt-On Installation; No Drilling Required
Dorman – Toyota Molding Retainer (Part No.963-512D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Moulding Retainer Head Dia 1.01 X 0.51 In Shank Lng 0.92 In Hole Dia 0.39 In (Part No.963-647)
from
$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Molding Clip Head Dia 0.5In Shank Long 0.62In Hole Dia 0.32In (Sold by each) (Part No.963-529BX)
from
$0.49
All our Multi-Purpose Retainers are made of high quality materials for long-lasting durability. Offering a full line of Multi-Purpose Retainers for a wide range of applications.
Product Features:
See More
Product Features:
- Durable nylon design for a long service life
- Also suitable for a broad variety of industrial and commercial uses
- Conveniently packaged in a variety of piece counts
- Direct replacement Retainers available (where applicable) to ensure a proper fit
Dorman – Molding Clip – Head Diameter 0.67" Shank Long 0.64" Hole Diameter .42", Package Quantity: 2 (Part No.963-561)
from
$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Popular 2012 Toyota 4Runner Bodies and Fender Parts Categories
2012 Toyota 4Runner Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 2012 Toyota 4Runner. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 37 different Bodies and Fender Parts in our inventory ranging from $0.49 to $775.99. That means you can find the exact parts or products you need to keep that 2012 Toyota 4Runner running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Toyota 4Runner. Dorman, Dee Zee, and TrailFX are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 2012 Toyota 4Runner, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 5 reviews in this category, some of the top rated parts include Sure-Grip Running Boards with 3.0 stars.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 2012 Toyota 4Runner rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 2012 Toyota 4Runner Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Toyota 4Runner demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 4Runner the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Dorman Bodies and Fender Parts
We carry Dorman parts in our stock across Fender Splash Shields categories, plus more. For a 2012 Toyota 4Runner, our most popular Dorman Bodies and Fender Parts include:
Top 2012 Toyota 4Runner Bodies and Fender Parts from Dee Zee
Dee Zee products are another trusted brand when it comes to Bodies and Fender Parts for your 2012 Toyota 4Runner. Popular Dee Zee parts include:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
FAQs for 2012 Toyota 4Runner Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 2012 Toyota 4Runner?
Out of 37 Bodies and Fender Parts for the 2012 Toyota 4Runner, the most popular in our inventory are:
from
$48.49
This product is not rated
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
Splash Guard (Mud Flap)
What are the top-rated 2012 Toyota 4Runner Bodies and Fender Parts?
Top-rated Bodies and Fender Parts for your 2012 Toyota 4Runner based on customer reviews/ratings are:
from
$412.99
(1)
Sure-Grip Running Boards
“The product was good but the only problem was that it didn’t come with any hardware n bolt to mount on brackets”
