Name: Plug; Floor; 6.3mm H
Brand: Omix
SKU: 12033.15
Price: 6.79 USD

from

$6.79

Plug; Floor; 6.3mm H

from

$447.99

Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge’s Side Armor. Built from heavy-duty 2 x 0.120 inch black texture powder coated steel tubing, these guards will take the beating that was meant for your body sheet metal. Si

Product Features:

Black
Minor Drilling Required
Greater Ground Clearance
Hardware Included
Frame Mounted

from

$59.99

Are you rebuilding an engine and need a fresh set of main bearings? Omix-ADA offers high-quality replacement main bearing sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:

Standard
OE Style
Direct Fit
Limited 5 Year Warranty

from

$174.99

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

Required Part For Oval Tubes
Vehicle Specific Mount Kit Insures Proper Fit
5 Year Warranty

from

$431.99

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

Mount Kit Included
Rocker Panel Mount
Drilling Not Required
2 Pads On The Bar
30 To 60 Minute Professional Installation Time
T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
Oval Step Shape Offers A Wider Stepping Area For Secure Footing
Provides Moderate Protection Against Road Hazards And Debris

from

$64.99

CntrCnsCover

from

$102.99

LiftgateSeal

from

$93.99

New Standard Replacement Front Lower Valance Panel

Product Features:

Made Of Olefinic Thermoplastic Elastomer
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.49

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

Available in blind, push-in and screw-in styles
Constructed of high-quality materials for long-lasting durability
Also suitable for a broad variety of industrial and commercial uses
Packaged in a variety of piece counts for use with both small and large projects

from

$115.99

Door Handle Inserts;

from

$502.99

Is your front fender rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old fender when you can start with a new one?

Product Features:

Steel
OE Style
Direct Fit
Primered
Limited 5 Year Warranty

from

$146.99

Laser Measured MudFlaps are custom fit and protect your vehicle s fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle s wheels. No drilling required and installs in Minutes. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the Weathertech MudFlap will offer undeniable vehicle protection.

Product Features:

Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
MudFlap Will Offers Undeniable Vehicle Protection
Features The Patented QuickTurn Hardened Stainless Steel Fastening System
Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface

from

$105.99

This pair of weather resistant stainless steel rear corner body guards protect the lower edges of your Jeep while adding a touch of style at the same time. All Rugged Ridge Stainless Accessories are constructed of prime 304 stainless steel polished to a m

Product Features:

Stainless Steel
Weather Resistant
Pair
Hardware Included
Limited 5 Year Warranty

from

$65.99

At ARIES, we know what it means to be a Jeep owner. We know that the sky is your roof, the rocky slopes are your bread and butter, and the mud in your tires is the blood pumping through your veins. Owning a Jeep means fueling up with more than just gasoline because it’s passion that drives you every time you turn the ignition. That same passion has been our inspiration for the ARIES line of Jeep products. From our modular bumpers and tube doors to our security cargo lid and fender flares, ARIES is your gateway to the ultimate off-roading experience. The ARIES Jeep tire relocation carrier is made with high-strength carbon steel and covered in a durable, dual-layer E-coat and black powder coat finish to resist scuffs, grime and rust. It offers reliable strength and easy installation (NOTE: Using aftermarket lug nuts may prevent proper torqueing of the spare tire to the carrier. Refer to the installation instructions for additional information and torque values).

Product Features:

Allows for a larger spare tire up to 35″ in diameter
Securely bolts onto existing rear door tire carrier
Maintains easy access to the rear cargo area
Brackets fortify tire relocation carrier to accept larger tires
Strong steel construction with a durable E-coat and black powder coat finish

from

$2.46

Interior Panel Retai

from

$465.99

Complete the look with a set of Rugged Ridge tubular tough duty side steps. Available in 3-Inch round, 4-Inch round, and 4.25-Inch oval diameter sizes. The large 4.25-Inch oval and 4-Inch round tubes provide a much cleaner look and are not dwarfed by over

Product Features:

Stainless Steel
3 in. Round
No-Slip Step Pad
Frame Mounted
Limited 5 Year Warranty

from

$841.99

Hurricane Fender Fla

from

$863.99

For those who eat, sleep and breathe off-roading, ARIES fender flares show off your off-road tires better than factory flares, and they feature strong, lightweight aluminum construction to easily stand up to the elements. These front and rear inner fender liners are designed to mount with ARIES Jeep JK fender flares and provide ultimate protection for your engine compartment against mud, water and road debris. ARIES Jeep inner fender liners are constructed from welded aluminum to not only be lightweight and rust-free, but also to offer better strength than the plastic factory fender liners. They are also covered in a highly durable carbide black powder coat finish for maximum corrosion protection. ARIES fender liners install securely in conjunction with ARIES fender flares and include all necessary hardware for a complete installation (some drilling and rivet nut installation required). Jeep fender liners are also available in individual sets for the front or rear.

Product Features:

Helps protect engine compartment against mud, water and other debris
Replaces plastic factory fender liners on the front and rear
Welded aluminum construction to be strong, lightweight and rust-free
Highly durable carbide black powder coat finish for maximum corrosion resistance
Designed for installation with ARIES fender flares #1500201 and #2500201
Some drilling and rivet nut installation required

from

$2.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

Black
OE Style
Direct Fit
Easy To Install
Limited 5 Year Warranty

from

$59.99

New CAPA Certified Standard Replacement Passenger Side Fender Liner/Splash Shield

Product Features:

Made Of High Density Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$46.99

Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

from

$72.99

CntrCnsCover

from

$75.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

OE Style
Direct Fit
Rubber
Eliminates Rattling; Wind Noise; Water Damage

from

$52.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Limited 12 Month Or 12,000 Mile Warranty

from

$53.99

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

Direct replacement – this body mount fits and functions like the original equipment mount
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance