2012 Ford F-150 Steering and Chassis Parts

Name: Lower Steering Shaft
Brand: Dorman
SKU: 425-354
Price: 409.99 USD
Rating: 1.0 (1 reviews)

Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 2012 F-150. Advance Auto Parts has popular F-150 parts like Ball Joints, Sway Bars, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other F-150 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2012 Ford F-150 Steering and Chassis Parts below and start saving instantly.

Popular 2012 Ford F-150 Steering and Chassis Parts Categories

Power Steering Coolers

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Alignment Caster Adjustment Spacers

Caster and Camber Kits

Front Alignment Kits

Drive Shaft CV Joints

Power Steering Pressure Hoses

Steering Knuckles

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Variable Assist Power Steering Module Connector

Essential Steering and Chassis Parts for 2012 Ford F-150s

from

$409.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$772.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$102.99

Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$135.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$401.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$202.99

This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$55.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$157.99

Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.

Product Features:

Ball joint kit for Dana Spicer 30 and 44
Complete kit for upper and lower
Services one side
Replaces Spicer part number 706116X

from

$133.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$1136.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Rack and Pinions are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$55.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Improves vehicle handling
Restores OE alignment
Improves steering geometry
Easy camber adjustment

from

$36.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100 percent tested to ensure proper fit and function.

Product Features:

100 percent testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$16.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$69.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER« INNOVATION — Combines the best features of socket-style and bolt-style sway bar links
EASY TO INSTALL — Stop-out design minimizes sensitivity to installation torque and molded bushings hold coated washers in place for easy installation
KEEPS DIRT AND WATER OUT — Integral boot shields components from wear-causing
DURABILITY — With the nut seated fully against the stop, the bushings are ideally preloaded to provide excellent durability
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$112.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$125.99

PS COOLER

from

$46.49

Ball Joint

from

$94.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$61.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$70.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$40.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$56.99

Allows 0 to 3.2 Degrees adjustment

from

$83.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$35.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$28.99

Power Steering Filter

from

$31.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$21.29

Premium materials for long life
Restores like-new steering and handling
Replacement can reduce front end noise
Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils
Incorporates proven design and engineering features

Upgrade your 2012 Ford F-150 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2012 Ford F-150, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your F-150 functioning at its best. At Advance Auto Parts, we offer a wide selection of 87 Steering and Chassis Parts for the 2012 Ford F-150, designed to meet your needs without breaking the bank. From Ball Joint replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2012 Ford F-150 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $7.99 to $1,295.99, with an average price of $149.65. Our 87 Steering and Chassis Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2012 Ford F-150 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Ford F-150, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, DriveWorks, and more. Moog Steering and Chassis Parts start at just $72.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and DriveWorks also bring quality to the table, with Steering and Chassis Parts available starting at $46.49, and at an average 4.4 stars rating. With 7,007 customer reviews and counting, our 2012 Ford F-150 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Ford F-150 is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 in top shape, all in one place. Start shopping confidently below for your 2012 Ford F-150!

Best-Selling Ball Joints for 2012 Ford F-150s

Enhance the driving experience in your Ford with 31 quality Ball Joint components, starting at $46.49.

show more show less

from

$72.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$122.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

KEEPS DIRT AND WATER OUT –?Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation

from

$163.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$163.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$46.49

Ball Joint

from

$122.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$81.99

Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.

Product Features:

Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$149.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$149.99

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$57.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$87.99

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$125.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$125.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$213.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$171.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$123.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$213.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$772.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$772.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$287.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer

from

$287.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer

from

$205.99

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

Most Popular 2012 Ford F-150 Sway Bars

Customize your Ford with 12 Sway Bars products like Sway Bar Link Kits, Sway Bar Link Bushing Kits, and Sway Bar Bushings, all priced under $129.99.

show more show less

from

$49.99

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$62.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$82.99

EASY TO INSTALL — Wrench flats ensure easy installation and removal
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$46.49

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$59.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$20.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$129.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$92.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$49.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$104.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$56.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$15.99

Product Features:

PREMIUM MATERIALS- Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE – Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING – Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

Top Picks for 2012 Ford F-150 Power Steering Parts

Upgrade Ford F-150s with top-quality Power Steering Parts parts, including 25 OEM and aftermarket selections for your 2012 model.

show more show less

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$36.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Heavy-duty power steering oil cooler
Size: 3/4″ x 5″ x 9-1/4″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$36.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$97.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$322.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$186.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$1295.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100 percent replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$1256.99

The electronic power steering (EPS) rack on certain Ford trucks often fails from moisture and debris intrusion into the control unit, and replacement has typically required expensive dealer programming. This Dorman OE FIX EPS rack features an improved design to prevent the moisture and debris intrusion that causes mechanical and electronics failure in the factory design. It also includes a proprietary programmer for fast, free setup. Just plug the calibration tool into the OBDII port and follow the instructions – you don’t even need to download software off the original rack. The entire assembly is made of 100% new components – not re-manufactured like competing aftermarket replacements – and has been validated to meet Federal Motor Vehicle Safety Standards for a trustworthy repair.

Product Features:

100% new assembly – every component in this steering rack is completely new, not re-manufactured like other aftermarket EPS racks
Saves time and money – eliminates the need to return to the dealer for expensive programming that could easily cost $100 or more
Upgraded solution – this electronic power steering assist rack features improved seals and coated electronics to help prevent moisture damage and corrosion that often causes factory equipment to fail
Quality tested – validated to meet FMVSS requirements and has undergone try-on, corrosion, water intrusion and life-cycle testing to ensure a quality fit and long service life

from

$246.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$156.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$103.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$58.99

100 percent testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$40.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

Power Steering Filter

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

In-Demand Tie Rods for 2012 Ford F-150s

Select from 9 premium Tie Rods parts for your 2012 Ford F-150, with prices ranging from $54.99 to $199.99.

show more show less

from

$54.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$93.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$93.99

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$54.99

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$135.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$102.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$199.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$199.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$99.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Most Sold 2012 Ford F-150 Steering Shafts

Explore our best-selling Ford parts for the 2012 F-150 among 2 OEM and aftermarket options starting from $206.99.

show more show less

from

$209.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$206.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

Top-Rated Steering and Chassis Parts Brands For Your 2012 Ford F-150

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2012 Ford F-150s. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and DriveWorks, and more. Steering and Chassis Parts from these brands that fit a 2012 F-150 start at just $46.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2012 Ford F-150 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2012 Ford F-150, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2012 Ford F-150. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $72.99, with an average price of just $119.99. Plus, with over 40 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $163.99

(13)

Front Right Upper Suspension Control Arm and Ball Joint Assembly

“Hooked up in no time”

from $122.99

(18)

Front Right Upper Suspension Control Arm and Ball Joint Assembly

“Great product”

from $72.99

(9)

Suspension Ball Joint

“Quality part.”

Popular Carquest Premium 2012 Ford F-150 Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2012 Ford F-150 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2012 F-150, Advance Auto Parts carries a full inventory of 2 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $46.49 to $49.99, plus, with more than 6 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $49.99

(3)

Sway Bar Link

“This Stabilizers Bar link fit perfectly on my 2011 f150, great product.”

from $46.49

(3)

Sway Bar Link

“Made ride way stiffer”

FAQs for 2012 Ford F-150 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2012 Ford F-150s?

Out of 87 Steering and Chassis Parts that fit 2012 Ford F-150s, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
Suspension Stabilizer Bar Link (10111991) – $82.99
Suspension Ball Joint (21880504) – $72.99

What’s the price range for 2012 Ford F-150 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2012 Ford F-150 start at $7.99 and go up to $1,295.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2012 Ford F-150?

The average price for Steering and Chassis Parts for the 2012 Ford F-150 is $149.65. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford F-150 model years?

Yes, we currently carry Steering and Chassis Parts for 31 model years of Ford F-150s between 1977 and 2025. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2012 Ford F-150?

The cheapest 2012 Ford F-150 Steering and Chassis Parts we carry in stock are:

Power Steering Filter (50167394) – $7.99
Mounting Kit System (6014844) – $11.99
Suspension Stabilizer Bar Bushing Kit (50312778) – $15.99
Cup (50206150) – $16.49
Suspension Stabilizer Bar Bushing Kit (11315404) – $20.49

What are the top-rated Steering and Chassis Parts that fit the 2012 Ford F-150?

Out of 7,007 reviews by customers, our 2012 Ford F-150 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2012 Ford F-150 and their top-rated products:

Tie Rods
- Steering Tie Rod End (99998376) – $54.99

What types of Steering and Chassis Parts do you sell for my 2012 Ford F-150?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2012 Ford F-150:

Can I get help with 2012 Ford F-150 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford F-150 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford F-150 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Ford F-150 Steering and Chassis Parts

Dorman – Lower Steering Shaft (Part No.425-354)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK623211)

Lares – Remanufactured Power Steering Pump (Part No.2215)

MOOG – Steering Tie Rod End (Part No.ES800514)

Dorman – Steering Knuckle (Part No.697-901)

Dorman – Propeller Shaft CV Joint Kit (Part No.932-206)

Carquest Premium – Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 3/8" Swivel "O" Ring (Type I) (Part No.35445)

Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)

Carquest Premium – Power Steering Return Hose, 11mm Male Captive "O" Ring x 1/2" Beaded Tube (Part No.38392)

PWR – New Hydraulic Power Rack and Pinion (Part No.42-2685)

Rare Parts – Cam Bolt Kit (Part No.RP17736)

Cardone New – New Power Steering Reservoir (Part No.3R-903)

FAG US – Cup (Part No.M802011)

MOOG – Suspension Stabilizer Bar Link (Part No.K80338)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.928-556)

Edelmann – PS COOLER (Part No.58016)

Driveworks – Ball Joint (Part No.DW-K500008)

Rare Parts – Ball Joint (Part No.RP11112)

MOOG – Alignment Caster / Camber Kit (Part No.K100343)

MOOG – Alignment Caster / Camber Kit (Part No.K80087)

Carquest Premium – Multi-Use Connector (Part No.PTC2737)

MOOG – Alignment Caster / Camber Bushing (Part No.K80108)

MOOG – Alignment Caster / Camber Kit (Part No.K100350)

Cardone – Power Steering Filter (Part No.20-P038F)

BBB Industries – Power Steering Filter (Part No.991-FLT3)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5102G)

Rare Parts – Sway Bar Link (Part No.RP18586)

MOOG – Suspension Stabilizer Bar Link Kit (Part No.K80086)

MOOG – Suspension Ball Joint (Part No.K500008)

MOOG – Front Right Upper Suspension Control Arm and Ball Joint Assembly (Part No.RK80308)

MOOG – Front Right Upper Suspension Control Arm and Ball Joint Assembly (Part No.CK80308)

MOOG – Front Left Upper Suspension Control Arm and Ball Joint Assembly (Part No.CK80306)

Driveworks – Ball Joint (Part No.DW-K500008)

MOOG – Front Left Upper Suspension Control Arm and Ball Joint Assembly (Part No.RK80306)

Driveworks – Control Arm with Ball Joint (Part No.520-285)

Carquest Premium – Control Arm with Ball Joint (Part No.810-258591B)

Carquest Premium – Upper Control Arm with Ball Joint (Part No.810-258590B)

Carquest Premium – Ball Joint (Part No.410-258607)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621266)

MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621267)

MOOG – Suspension Ball Joint (Part No.K500193)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK622933)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK622934)

Dorman – Suspension Control Arm (Part No.522-213)

Dorman – Suspension Control Arm (Part No.524-601)

Dorman – Suspension Control Arm (Part No.524-602)

Dorman – Lower Control Arm (Part No.522-214)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK623211)

MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK623212)

MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.CK621267)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.CK621266)

Carquest Premium – Lower Control Arm with Ball Joint (Part No.820-322413B)

Carquest Premium – Sway Bar Link (Part No.510-258596)

MOOG – Suspension Stabilizer Bar Link (Part No.K750511)

MOOG – Suspension Stabilizer Bar Link (Part No.K750362)

Carquest Premium – Sway Bar Link (Part No.510-322416)

MOOG – Suspension Stabilizer Bar Link (Part No.K750074)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200846)

Rare Parts – Sway Bar Link (Part No.RP22034)

Rare Parts – Sway Bar Link (Part No.RP19271)

Rare Parts – Sway Bar Bushing (Part No.RP22421)

Rare Parts – Sway Bar Link (Part No.RP15531)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.540-711)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K202166)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)

Cardone – Power Steering Filter (Part No.20-P038F)

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Carquest Premium – Power Steering Return Hose, 1/2" I.D. Hose x 1/2" I.D. Hose (Part No.40529)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-2121)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Pressure Hose, 11mm Male Captive "O" Ring x 14mm Male Captive "O" Ring (Part No.37831)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1A-2019)

Dorman – Electronic Power Steering Rack – New (OE Fix) (Part No.601-900)