2012 Ford Expedition Air Flow Sensors
More 2012 Ford Expedition Air Flow Sensors
Find your specific 2012 Ford Expedition original or aftermarket Air Flow Sensors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2012 Ford Expedition Air Flow Sensors
Carquest Premium – Engine Coolant Temperature Sensor (Part No.ACA1523)
from
$28.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1251)
from
$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Air Charge Temperature Sensor (Part No.EF0016)
from
$30.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DY-1137)
from
$62.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Motorcraft – Ambient Temp Sensor (Part No.P4025679176MTR)
from
$32.00
Ambient Temp Sensor
Motorcraft – Original Equipment (O.E.) Sensor Assembly – Tripminder (Part No.DY-1160)
from
$33.49
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Motorcraft – Wire Assembly (Part No.WPT-322)
from
$69.99
Wire Assembly
Carquest Premium – Mass Air Flow Sensor Connector (Part No.PTA1213)
from
$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 19.80" Long, Heated, Exact Fit (Part No.234-5174)
from
$163.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit the first t
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Motorcraft – Motorcraft Oxygen Sensor (Part No.C5010381113MTR)
from
$156.40
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.
Product Features:
See More
Product Features:
- Same components used in the factory
- Units come ready to plug and play, with no need for modifications
- OE connectors and wire lengths
- Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
- Designed to help provide optimal performance and fuel economy
- OE enhancements are included in the most current designs
- Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
Bosch – Bosch Oxygen Sensor (Part No.C5010104371BOS)
from
$48.77
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 28.5" Long, Heated, Direct Fit (Part No.24326)
from
$92.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Bosch Oxygen Sensor (Part No.C501091453BOS)
from
$49.74
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
DENSO – Air/Fuel Sensor (Part No.234-5713)
from
$103.99
Air/Fuel Sensor
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 28.74" Long, Heated, Exact Fit (Part No.234-5076)
from
$92.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit the first t
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Motorcraft – Motorcraft Oxygen Sensor (Part No.C5010165002MTR)
from
$110.07
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.
Product Features:
See More
Product Features:
- Same components used in the factory
- Units come ready to plug and play, with no need for modifications
- OE connectors and wire lengths
- Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
- Designed to help provide optimal performance and fuel economy
- OE enhancements are included in the most current designs
- Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
Motorcraft – Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency (Part No.C5010948703MTR)
from
$84.80
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.
Product Features:
See More
Product Features:
- Same components used in the factory
- Units come ready to plug and play, with no need for modifications
- OE connectors and wire lengths
- Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
- Designed to help provide optimal performance and fuel economy
- OE enhancements are included in the most current designs
- Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 20.8" Long, Heated, Direct Fit (Part No.24348)
from
$133.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Carquest Premium – Ambient Air Temperature Sensor Connector (Part No.PTC2689)
from
$58.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Ambient Air Temperature Sensor Connector (Part No.PTA2929)
from
$82.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Engine Coolant Temperature Sensor Connector (Part No.PT5750)
from
$45.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Popular 2012 Ford Expedition Air Flow Sensors Categories
2012 Ford Expedition Air Flow Sensors
Maybe you’re in the middle of a full rebuild of that 2012 Ford Expedition. Maybe you just need a couple of Air Flow Sensors. Either way, Advance Auto Parts has 9 different Air Flow Sensors in our inventory ranging from $45.05 to $137.99. That means you can find the exact parts or products you need to keep that 2012 Ford Expedition running smoothly.
Air Flow Sensors are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Ford Expedition. Carquest, DENSO, and Motorcraft are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Air Flow Sensors for your 2012 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Air Flow Sensors to keep your 2012 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Air Flow Sensors Brands To Make Your 2012 Ford Expedition Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Air Flow Sensors make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Air Flow Sensors brands and parts.
Popular Carquest Air Flow Sensors
We carry Carquest parts in our stock across Ambient Air Temperature Sensor Connectors categories, plus more. For a 2012 Ford Expedition, our most popular Carquest Air Flow Sensors include:
from
$45.05
(3)
Engine Coolant Temperature Sensor Connector
Ambient Air Temperature Sensor Connectors
FAQs for 2012 Ford Expedition Air Flow Sensors
What are the most purchased Air Flow Sensors for the 2012 Ford Expedition?
Out of 9 Air Flow Sensors for the 2012 Ford Expedition, the most popular in our inventory are:
from
$92.99
This product is not rated
Wideband Oxygen Sensor: Upstream, 5 Wire, 28.74" Long, Heated, Exact Fit
Air- Fuel Ratio Sensors
from
$62.99
This product is not rated
Original Equipment (O.E.) Sensor Assembly
Ambient Air Temperature Sensors
