2012 Ford E-250 Differentials

Name: Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70
Brand: Yukon Gear
SKU: 23007
Price: 13.99 USD

Find your specific 2012 Ford E-250 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2012 Ford E-250 Differentials

from

$13.99

Product Features:

Cover gasket
Fits Dana Spicer 60, 70, 70U and 70HD

from

$479.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$339.99

Yukon long yoke for ’93 and newer Ford 10.25″ and 10.5″ with a 1410 U/joint size. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1993 and up Ford 10.25″ and 10.5″
31 spline
1410 u-joint size
4.188″ snap ring span
1.188″ cap diameter
Outside snap ring design
Strap style

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM89410 race
All steel construction

from

$4.99

Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:

Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
1/2″ x 18 thread

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$151.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Dana Spicer 60 rear
Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

from

$17.99

Product Features:

Pinion depth shims for Dana Spicer 60 and 70U

from

$5.99

Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:

Pinion gear thrust washer for Dana Spicer 60
Fits standard open and Trac Loc applications

from

$194.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits Dana Spicer 60
Includes carrier bearings and races and carrier shim kit

from

$596.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$26.99

Product Features:

Cross pin shaft
Fits Dana Spicer 60

from

$8.99

Replacement crush sleeve for Dana 60, APROX 0.660″ long.

Product Features:

Crush sleeve for Dana Spicer 60
0.660″ tall

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 60

from

$104.99

Product Features:

Carrier shims for Dana Spicer 60 and 70U

from

$6.99

Product Features:

Oil baffle for Dana Spicer 60 and Dana Spicer 70U

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$18.91

Pinion Seal

from

$1195.00

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit fits full floating applications only.

Product Features:

Fits Ford 10.25″ and 10.5″
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$529.99

TracLoc positraction clutch set for 3 pinion design for 10.5″ Ford.

Product Features:

Clutch kit
Fit Ford 10.5″ Trac Loc positraction

from

$373.99

Differential Pinion

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$10.99

Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:

Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
7/8″ x 20 thread
1 1/8″ socket

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$114.99

Product Features:

Fits standard rotation Dana Spicer 60
Steel

from

$689.99

Ring and Pinion Kit

from

$8.89

CUP

Popular 2012 Ford E-250 Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Pinion Bearing Spacers

Maybe you’re in the middle of a full rebuild of that 2012 Ford E-250. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 171 different Differentials in our inventory ranging from $2.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 2012 Ford E-250 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Ford E-250. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2012 Ford E-250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 2012 Ford E-250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2012 Ford E-250 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Ford E-250 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-250 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Valvoline Differentials

We carry Valvoline parts in our stock across Differential Oil categories, plus more. For a 2012 Ford E-250, our most popular Valvoline Differentials include:

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

from $14.99

(36)

Transfer Case Fluid, 1 Quart

Differential Oil

FAQs for 2012 Ford E-250 Differentials

What are the most purchased Differentials for the 2012 Ford E-250?

Out of 171 Differentials for the 2012 Ford E-250, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $9.99

(8)

Bearings

Rear Differential Pinion Bearings

from $31.99

(4)

Cylindrical Bearing

Differential Pinion Pilot Bearings

2012 Ford E-250 Differentials

More 2012 Ford E-250 Differentials

Essential 2012 Ford E-250 Differentials

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Dorman – Rear Axle Shaft, Right (Part No.630-243)

Yukon Gear – Long Yoke For ’93 And Newer Ford 10.25" And 10.5" With A 1410 U/Joint Size (Part No.41042)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – Bearing Race Driver (Part No.56017)

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)

Powertrax – Grip PRO Traction System (Part No.GT436035)

Yukon Gear – Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi (Part No.33314)

Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

SKF – Pinion Seal (Part No.J7010201578SKF)

Yukon Gear – Dura Grip For Ford 10.25" & 10.5" (Part No.26031)

Yukon Gear – Tracloc Positraction Clutch Set For 3 Pinion Design For 10.5" Ford (Part No.16101)

Yukon Gear – Differential Pinion (Part No.13112)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)

Yukon Gear – Ring and Pinion Kit (Part No.24617)

FAG US – CUP (Part No.15245)

Popular 2012 Ford E-250 Differentials Categories