2012 Ford E-150 Drivetrains
More 2012 Ford E-150 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2012 Ford E-150, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2012 Ford E-150 Drivetrains
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Yukon Gear – Crush Sleeve Spacer For Ford 9.75", 0.280" Tall (Part No.33461)
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-2020)
from
$434.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)
Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)
Dorman – Transfer Case Gasket (Part No.917-522)
from
$10.79
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
- Effective fix – restores a tight seal in the transfer case after original gasket fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)
Yukon Gear – Minor Install Kit For Ford 9.75" Differential (Part No.12041)
from
$142.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Ford 9.75″
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Chrome Cover For 8.8" Ford (Part No.32009)
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
NTN – Axle Shaft Bearing (Part No.K4010212752NTN)
from
$42.90
Axle Shaft Bearing
Dorman – Differential Clutch Kit (Part No.697-781)
from
$269.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
- Quality materials – all components are built for reliable longevity and performance
- Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
- Trustworthy quality – backed by team of designers and engineers in the United States
USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)
from
$209.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 31 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Seal For 10.25" Ford (Part No.30069)
from
$17.99
Pinion seal for 10.25″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Ford 10.25″
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
Yukon Gear – 9.75" Tracloc Clutch Set, Includes Belleville Springs (Part No.16037)
Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)
from
$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60 and 70
- Powr Lok positraction only
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-033.1)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Bearing Race Driver (Part No.56011)
from
$215.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM803110 race
- All steel construction
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Yoke For Dana 60 And 70 With 1410 U/Joint Size (Part No.41031)
from
$334.99
Yukon replacement yoke for Dana 60 and 70 with 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- U-bolt style
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Pro-King – Differential Pinion Shim Kit (Part No.742G202)
from
$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)
from
$483.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 18 piece kit
- Steel clutches
Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)
from
$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.
Product Features:
See More
Product Features:
- Axle stud for Ford 7.5″, 8.8″ and 9″
- 1/2″ x 20 thread
- 1 7/8″ long
- 29/64″ shoulder length
Yukon Gear – High Performance Ring & Pinion Gear Set For ’11 & Up Ford 9.75" In A 4.11 Ratio (Part No.24614)
from
$657.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits 2011 and up Ford 9.75″
- 9.75″ ring gear diameter
- 31 spline
- 12 ring gear bolts
- 4.11 ratio
Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)
from
$59.99
Product Features:
See More
- Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
- Interlocking design makes installation much easier
Popular 2012 Ford E-150 Drivetrains Categories
2012 Ford E-150 Drivetrains
You count on your 2012 Ford E-150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 315 Drivetrains ranging in price from $3.29 to $1,487.99, you’re sure to find everything you need for your 2012 Ford E-150.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and National. 2012 Ford E-150 Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 9,774 extensive product reviews on 2012 Ford E-150 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Multi Purpose Seal with 4.1 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2012 Ford E-150 below to get started!
Top-Rated Drivetrains Brands For Your 2012 Ford E-150
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Ford E-150 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Drive Shafts and Axles and Spindles. All are waiting to get your 2012 Ford E-150 back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2012 Ford E-150, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2012 Ford E-150 Drivetrains
What are the most purchased Drivetrains for the 2012 Ford E-150?
Out of 315 Drivetrains for the 2012 Ford E-150, the most popular in our inventory are:
What are the top-rated 2012 Ford E-150 Drivetrains?
Top-rated Drivetrains for your 2012 Ford E-150 based on customer reviews/ratings are:
