2012 Chevrolet Volt Cooling and Climate Controls
Find Your Specific 2012 Chevrolet Volt Cooling and Climate Controls
Below you will find various in-demand Chevrolet Cooling and Climate Controls, components and accessories for your 2012 Volt. Advance Auto Parts has popular Volt parts like Blend Doors, Engine Cooling Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Volt model years including
2011,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2012 Chevrolet Volt Cooling and Climate Controls below and start saving instantly.
Popular 2012 Chevrolet Volt Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2012 Chevrolet Volts
Carquest Premium – Blower Motor: with Wheel (Part No.76933)
from
$162.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)
from
$1.49
These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Sensor, 206 Degrees (Part No.902-2117)
from
$286.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Imperial – Electric Fan, 12" Diameter (Part No.226112)
from
$108.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 12 in. universal fit reversible fan
- 800 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44146)
from
$133.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Imperial – Electric Fan, 10" Diameter (Part No.226110)
from
$72.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 10 in. universal fit reversible fan
- 650 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1506)
from
$64.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.55591401)
from
$29.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine running at proper temperature
- Alerts vehicle operator of high engine temperature conditions
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Heater Core (Part No.910500)
from
$100.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
- Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Designed to keep your A/C system in top shape and built to provide long-lasting service
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Carquest Premium – Multi-Use Connector (Part No.PTA1336)
from
$72.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Factory Air – System Mounted Pressure Transducer (Part No.20915)
from
$44.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Color coded for easy identification
- Zinc coated to resist corrosion
- Vehicle specific applications
Carquest Premium – Radiator (Part No.813588)
from
$249.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
Felpro – Engine Coolant Outlet Gasket (Part No.ES 72471)
from
$13.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Multi-Use Connector (Part No.PTA1302)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)
from
$4.99
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Carquest Premium – Humidity Sensor (Part No.ACA2024)
from
$95.99
The heating-ventilation-air-condition (HVAC) air distribution system is designed to control the movement of air in the HVAC air distribution assembly as well as control the interior cabin temperature. Actuator doors which may be mechanically or electrically operated with a motor allow air movement through the system to provide the vehicle occupants the requested temperature desired for comfort. The Humidity Sensor reports interior cabin humidity levels and operates the climate system to remove uncomfortable high humidity levels.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$23.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248 Deg. F
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Felpro – Engine Coolant Thermostat Gasket (Part No.35980)
from
$7.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each thermostat gasket is built to Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2382)
from
$46.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35979)
from
$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
GM Genuine Parts – ABS Wheel Speed Sensor (Part No.13470639)
from
$41.99
ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle’s original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Restores ABS function and performance caused by failed wheel speed sensor
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured with GM Original Equipment specification for fit, form, and function
ACDelco – Multi-Purpose Pigtail (Part No.PT2319)
from
$53.99
ACDelco Professional Throttle Position Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)
from
$23.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R134a and R12 refrigerants
- Application specific
- SUV and rear air applications
- All the seals needed to complete the job
- Compatible with both R134a and R12 refrigerants
- Application specific
- SUV and rear air applications
GM Genuine Parts – Air Conditioning Line O-Ring (Part No.13579649)
from
$21.79
GM Genuine Parts Rubber-Bonded Sealing Washers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – HVAC Blend Door Gear Kit (Part No.926-758)
from
$19.99
Air not flowing through the dash vents properly? Repair a worn or broken blend door actuator with this replacement HVAC blend door gear kit. Saves time and money by replacing only the worn gear while preserving the rest of the blend door assembly.
Product Features:
See More
Product Features:
- Direct replacement – this blend door gear replaces only the damaged original gear without requiring a new blend door assembly
- Quality construction – this blend door gear is made from quality materials for a long service life
- Saves time and money – huge savings replacing only the worn HVAC blend door gear instead of the complete blend door
- Quality assured – this part has undergone testing to ensure a trouble-free installation
Dorman – Drive Type Rivet-GM-Hole SIze-6.5mm, Diameter 18mm (Part No.963-208)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Felpro – Engine Water Pump Gasket (Part No.35986)
from
$12.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83199)
from
$26.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Upgrade your 2012 Chevrolet Volt with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2012 Chevrolet Volt, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Volt functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Cooling and Climate Controls for the 2012 Chevrolet Volt, designed to meet your needs without breaking the bank.
From
Blend Door
replacements to
Engine Cooling Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2012 Chevrolet Volt at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $1.49 to $198.99, with
an average price of $57.62.
Our 46 Cooling and Climate Controls in stock come from 10 trusted brands, so you’re sure to find the right part for your 2012 Chevrolet Volt without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Chevrolet Volt, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like FELPRO, Factory Air, Carquest Premium, and more.
FELPRO Cooling and Climate Controls
start at just $10.99 and boast an impressive 4.6 stars average rating from customers.
Factory Air and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $21.99, and at an average 4.4 stars rating.
With 157 customer reviews and counting, our 2012 Chevrolet Volt Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 Chevrolet Volt is always ready to roll. We’re committed to providing you with everything you need to keep your Volt in top shape, all in one place.
Start shopping confidently below for your 2012 Chevrolet Volt!
Best-Selling Blend Doors for 2012 Chevrolet Volts
Enhance the driving experience in your Chevrolet with 2 quality Blend Door components, starting at $19.99.
Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-700)
from
$99.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.
Product Features:
See More
Product Features:
- Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
- Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
- Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
- Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
Dorman – HVAC Blend Door Gear Kit (Part No.926-758)
from
$19.99
Air not flowing through the dash vents properly? Repair a worn or broken blend door actuator with this replacement HVAC blend door gear kit. Saves time and money by replacing only the worn gear while preserving the rest of the blend door assembly.
Product Features:
See More
Product Features:
- Direct replacement – this blend door gear replaces only the damaged original gear without requiring a new blend door assembly
- Quality construction – this blend door gear is made from quality materials for a long service life
- Saves time and money – huge savings replacing only the worn HVAC blend door gear instead of the complete blend door
- Quality assured – this part has undergone testing to ensure a trouble-free installation
Most Popular 2012 Chevrolet Volt Engine Cooling Parts
Customize your Chevrolet with 21 Engine Cooling Parts products
like Radiators,
Water Pumps, and
Thermostat and Water Outlet Assemblies, all
priced under $198.99.
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$23.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248 Deg. F
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)
from
$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218)
from
$17.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35979)
from
$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Imperial – Electric Fan, 12" Diameter (Part No.226112)
from
$108.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 12 in. universal fit reversible fan
- 800 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$65.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Electric Fan, 10" Diameter (Part No.226110)
from
$72.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 10 in. universal fit reversible fan
- 650 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$46.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185 Deg. F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$69.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160 Deg. F – 210 Deg. F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218CD)
from
$17.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Carquest Premium – Coolant Temperature Sensor 1TS1025 (Part No.WTC1006)
from
$16.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.55591401)
from
$29.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine running at proper temperature
- Alerts vehicle operator of high engine temperature conditions
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Engine Water Pump Gasket (Part No.35986)
from
$12.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 176 Degrees (Part No.797-176)
from
$59.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1356)
from
$70.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2382)
from
$46.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Felpro – Engine Coolant Outlet Gasket (Part No.ES 72471)
from
$13.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.12656493)
from
$87.99
ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine running at proper temperature
- Alerts vehicle operator of high engine temperature conditions
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
KAI – Radiator (Part No.RAD13271)
from
$198.99
New Platinum Pro Radiator, Engine Cooler, 1.4 Liter L4 Engine
Product Features:
See More
Product Features:
- Engine Cooler, 1.4 Liter L4 Engine, Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Radiator Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)
from
$95.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Felpro – Engine Coolant Thermostat Gasket (Part No.35980)
from
$7.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each thermostat gasket is built to Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Top Picks for 2012 Chevrolet Volt Blower Motor and Related Products
Upgrade Chevrolet Volts with top-quality Blower Motor and Related Products parts, including 2 OEM and aftermarket selections for your 2012 model.
Carquest Premium – Blower Motor: with Wheel (Part No.76933)
from
$162.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – Multi-Use Connector (Part No.PTA1336)
from
$72.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
In-Demand Heating Parts for 2012 Chevrolet Volts
Select from 3 premium Heating Parts parts for your 2012 Chevrolet Volt, with prices ranging from $44.99 to $131.99.
Factory Air – System Mounted Pressure Transducer (Part No.20915)
from
$44.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Color coded for easy identification
- Zinc coated to resist corrosion
- Vehicle specific applications
Carquest Premium – Heater Core (Part No.910500)
from
$100.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
- Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Designed to keep your A/C system in top shape and built to provide long-lasting service
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Motorad – HVAC Heater Control Valve: Includes Valve and Bracket (Part No.TA9089)
from
$131.99
MotoRad Coolant Control Valves are designed and tested to provide precise and quick coolant redirection for every application. Manufactured using the finest OEM approved materials and electrical isolation features for increased durability and safety in the most extreme temperatures and conditions. All MotoRad Coolant Control Valves are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- An efficient Coolant Control Valve is critical to cooling the engine and other components by ensuring the coolant is directed to the proper channel where needed
- Designed to meet or exceed OE in fit, form and function
- 100% factory tested to ensure proper signal response and isolation providing unmatched performance and quality
- 100% factory tested to ensure proper signal response and isolation providing unmatched performance and qualityá
- Manufactured using the highest quality materials for increased durability in even the most extreme environments
- Extensive product testing includes high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all Coolant Control Valves meet or exceed OEM specifications
Most Sold 2012 Chevrolet Volt Air Conditioning Parts
Explore our best-selling Chevrolet parts for the 2012 Volt among 17 OEM and aftermarket options starting from $1.49.
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26824)
from
$23.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R134a and R12 refrigerants
- Application specific
- SUV and rear air applications
- All the seals needed to complete the job
- Compatible with both R134a and R12 refrigerants
- Application specific
- SUV and rear air applications
Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)
from
$4.99
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Carquest Premium – Multi-Use Connector (Part No.PTA1017)
from
$30.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1194)
from
$25.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
GM Genuine Parts – ABS Wheel Speed Sensor (Part No.13470639)
from
$41.99
ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle’s original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Restores ABS function and performance caused by failed wheel speed sensor
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured with GM Original Equipment specification for fit, form, and function
Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)
from
$1.49
These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Carquest Premium – AC Pressure Sensor (Part No.ABA1005)
from
$56.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each part meets manufacturing specifications before packaging.
Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83199)
from
$26.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44146)
from
$133.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – Multi-Use Connector (Part No.PTA1302)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713899)
from
$183.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
KAI – A/C Condenser (Part No.CND3899)
from
$75.99
New Platinum Pro A/C Condenser, With Receiver Drier, 1.4 Liter Engines
Product Features:
See More
Product Features:
- With Receiver Drier, 1.4 Liter Engines, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1506)
from
$64.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
ACDelco – Multi-Purpose Pigtail (Part No.PT2319)
from
$53.99
ACDelco Professional Throttle Position Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Delphi – ABS Wheel Speed Sensor (Part No.SS20251)
from
$26.49
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
- Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
- Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
- Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
GM Genuine Parts – Air Conditioning Line O-Ring (Part No.13579649)
from
$21.79
GM Genuine Parts Rubber-Bonded Sealing Washers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Drive Type Rivet-GM-Hole SIze-6.5mm, Diameter 18mm (Part No.963-208)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Top-Rated Cooling and Climate Controls Brands For Your 2012 Chevrolet Volt
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2012 Chevrolet Volts. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO, Factory Air, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2012 Volt start at just $10.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2012 Chevrolet Volt Cooling and Climate Controls
When it comes to maintaining or upgrading your 2012 Chevrolet Volt, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2012 Chevrolet Volt. With over 1 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.99. Plus, with over 2 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Factory Air 2012 Chevrolet Volt Cooling and Climate Controls
Factory Air auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2012 Chevrolet Volt owner should feel confident when installing genuine Factory Air parts in their vehicle. To ensure the best fit and performance for your 2012 Volt, Advance Auto Parts carries a full inventory of 2 Factory Air Cooling and Climate Controls. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Factory Air Cooling and Climate Controls range from $23.49 to $44.99, plus, with more than 18 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
FAQs for 2012 Chevrolet Volt Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2012 Chevrolet Volts?
Out of 46 Cooling and Climate Controls that fit 2012 Chevrolet Volts, the following parts are the top sellers:
- Body Bolt – M6-1.0 X 25mm (11910833) – $4.99
- O-Ring & Gasket A/C System Seal Kit (10598573) – $23.49
- System Mounted Pressure Transducer (20891852) – $44.99
What’s the price range for 2012 Chevrolet Volt Cooling and Climate Controls?
Cooling and Climate Control prices for the 2012 Chevrolet Volt start at $1.49 and go up to $198.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2012 Chevrolet Volt?
The average price for Cooling and Climate Controls for the 2012 Chevrolet Volt is $57.62. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Chevrolet Volt model years?
What are the cheapest Cooling and Climate Controls for my 2012 Chevrolet Volt?
The cheapest 2012 Chevrolet Volt Cooling and Climate Controls we carry in stock are:
- Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
- Body Bolt – M6-1.0 X 25mm (11910833) – $4.99
- Drive Type Rivet-GM-Hole SIze-6.5mm, Diameter 18mm (50210417) – $4.99
- Engine Coolant Thermostat Gasket (10942805) – $7.49
- Engine Coolant Thermostat Housing Gasket (10716992) – $10.99
What are the top-rated Cooling and Climate Controls that fit the 2012 Chevrolet Volt?
Out of 157 reviews by customers, our 2012 Chevrolet Volt Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2012 Chevrolet Volt and their top-rated products:
- Engine Cooling Parts
- Engine Coolant Thermostat Housing Gasket (10716992) – $10.99
- Adjustable Thermostatic Fan Control (6016936) – $23.99
- Radiator Cap: 20 PSI (10647381) – $21.99
What types of Cooling and Climate Controls do you sell for my 2012 Chevrolet Volt?
As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2012 Chevrolet Volt:
Can I get help with 2012 Chevrolet Volt Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Cooling and Climate Controls and more.
What is your return policy for Chevrolet Volt Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Chevrolet Volt Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
