2011 Toyota Land Cruiser Cooling and Climate Controls

Essential 2011 Toyota Land Cruiser Cooling and Climate Controls

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.13548)

Standard Thermostat: With Seal, 180 Degrees

from

$22.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Cap & Valve A/C System Seal Kit

from

$17.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

CSF – Metal Core Radiator (Part No.G1000130350CSF)

Metal Core Radiator

from

$567.59
The CSF radiator has been engineered to the highest specifications to meet or exceed original equipment and will fit exactly the same as with the original manufacturer’s parts with no need to move fittings, drill additional holes, or stretch hoses.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
See More

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2151)

HVAC Heater Core Temperature Sensor

from

$63.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Trimline Straight Blade Electric Fan

from

$125.99
Trimline Straight Blade Electric Fan

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.620-573)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$114.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Autopart International Inc – A/C Compressor (Part No.R10003199250API)

A/C Compressor

from

$281.75
A/C Compressor

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713792)

A/C Condenser and Receiver Drier Assembly

from

$342.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – A/C Serpentine Evaporator (Part No.T54156)

A/C Serpentine Evaporator

from

$98.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – System Mounted Pressure Transducer (Part No.37317)

System Mounted Pressure Transducer

from

$64.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Dorman – Engine Cooling Fan Pulley Bracket (Part No.300-820)

Engine Cooling Fan Pulley Bracket

from

$148.99
This engine cooling fan pulley bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cooling fan pulley bracket matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Coolant Temp Sensor Switch (Part No.36424)

Coolant Temp Sensor Switch

from

$34.05
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Color coded for easy identification
  • Zinc coated terminal to resist corrosion
See More

NTK – ABS Wheel Speed Sensor (Part No.AB1638)

ABS Wheel Speed Sensor

from

$177.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
  • NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
  • The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.
See More

Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)

Sankei Switches Radiator Cap

from

$10.06
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
See More

KAI – A/C Desiccant Element (Part No.ARD010152)

A/C Desiccant Element

from

$9.99
New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – HVAC Heater Core (Part No.910512)

HVAC Heater Core

from

$87.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
  • CARQUEST heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Designed to keep your A/C system in top shape and built to provide long-lasting service
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • CARQUEST offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35886)

Engine Coolant Outlet Gasket

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Universal Fan Clutch – 6" Import/Compact (Part No.215076)

Universal Fan Clutch - 6" Import/Compact

from

$89.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35893)

Engine Coolant Outlet Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.637-180)

Integrated Thermostat Housing: With Seal, 180 Degrees

from

$60.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Santech – A/C Pressure Switch (Part No.R1054261110SII)

A/C Pressure Switch

from

$41.24
A/C Pressure Switch

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – A/C and Heater Relay (Part No.R3054)

A/C and Heater Relay

from

$20.99
Product Features:
  • Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
  • A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
  • Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
  • The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
See More

DENSO – Relay (Part No.P2020749144ND)

Relay

from

$22.64
An electrical relay is sort of a magical device: it takes a small electrical signal and uses it to manage a much more powerful current, permitting electrical systems to be both lighter and more dependable at the same time. DENSO has supplied quality relays to the OE automotive world for over 60 years. The very same performance and dependability are available across the replacement aftermarket with DENSO First Time Fit® relays. Engineered to meet the most stringent automaker standards for shock resistance, arcing, and thermal protection, DENSO auto relays feature the lowest return rates in the industry; that equals value for car owners and repair facilities alike

Product Features:
  • Lead-free, solderless construction prevents heat shock and arcing
  • Controlled contact force, self-adjusting air gap increase longevity of the internal parts
  • Industry-standard packaging and footprint
  • Low heat generation
  • Reduced electrical loads
  • Built to last
See More

Carquest Premium – AC Pressure Sensor (Part No.ACA1745)

AC Pressure Sensor

from

$83.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

2011 Toyota Land Cruiser Cooling and Climate Controls

You count on your 2011 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 66 Cooling and Climate Controls ranging in price from $1.24 to $741.99, you’re sure to find everything you need for your 2011 Toyota Land Cruiser.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 20 different brands like Permatex, Carquest Premium, and Imperial. 2011 Toyota Land Cruiser Cooling and Climate Controls start as low as $1.24!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 677 extensive product reviews on 2011 Toyota Land Cruiser Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Adjustable Thermostatic Fan Control with 3.4 stars and Electric Fan – 14" Diameter with 3.5 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2011 Toyota Land Cruiser below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2011 Toyota Land Cruiser

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Imperial, and even more.

Popular Motorad Cooling and Climate Controls

You’ll find popular Motorad brand products across Engine Cooling Parts. All are waiting to get your 2011 Toyota Land Cruiser back on the road. Some of the top-rated Motorad products in these categories are:
Integrated Thermostat Housing: With Seal, 180 Degrees
from $60.99
(3)
Integrated Thermostat Housing: With Seal, 180 Degrees
Thermostat and Water Outlet Assemblies

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2011 Toyota Land Cruiser, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2011 Toyota Land Cruiser Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2011 Toyota Land Cruiser?

Out of 66 Cooling and Climate Controls for the 2011 Toyota Land Cruiser, the most popular in our inventory are:
Radiator Cap: 16 PSI
from $14.99
(137)
Radiator Cap: 16 PSI
Radiator Caps
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Caps and Valve Core Kits
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers

What are the top-rated 2011 Toyota Land Cruiser Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2011 Toyota Land Cruiser based on customer reviews/ratings are:
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“If you read the instructions it’s pretty self explanatory.”
Electric Fan - 14" Diameter
from $99.99
(14)
Electric Fan – 14" Diameter
“Fit fine. Easy install. Cools the car.”
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”